RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Help -- EX1 Mars R AM module問題 [打印本頁]

作者: pantherjovi    時間: 2006-7-26 21:06
標題: Help -- EX1 Mars R AM module問題
我有支Mars R,近來買左個AM Module (RF-103A),但吾知點解用時無反應.....是否要改什麽setting先用到??
謝謝幫忙....
作者: doubleding99    時間: 2006-7-26 21:40
Mars R 使用 AM module 是不能用futaba 等的am接收,KO 的就不清楚,而mini z 亦只可配合mr02 ,mini monster ,及awd 。早期的Mars R (小弟使用中)就可以配合mr01 mini f1及kr 297等接收使用,但亦未能配合其它am接收使用,至於ko的am接收,因小弟未曾嘗試就不得而知!Sample TextSample TextSample Text

[ 本帖最後由 doubleding99 於 2006-7-26 21:42 編輯 ]
作者: Motorman    時間: 2006-7-27 01:05
原帖由 pantherjovi 於 2006-7-26 21:06 發表
我有支Mars R,近來買左個AM Module (RF-103A),但吾知點解用時無反應.....是否要改什麽setting先用到??
謝謝幫忙....


Make sure your transmitter have enough power and antenna is pulled out... beside make sure your receiver is 27MHz frequency....... if all are ok, your module may have defect. Mine could control KO, Futaba, JR AM receiver.

If you are playing Mini-Z, take a look the chart from KO for compatibilities. Hit the below link:
Mini-Z chassis chart for compatibilites
作者: jimjimracing    時間: 2006-7-27 04:03
that is why i sell the Mar R. and buy a Mars EX1.  the short in speed is hardly i can notice.  only advantage is i have plenty of rx to use.
作者: kwok    時間: 2006-7-27 13:08
RF103是不對應MARS R的.
作者: pantherjovi    時間: 2006-7-28 09:12
Thank You...@@




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2