標題: EX1 UR 油門線性問題 [打印本頁] 作者: wing3pks 時間: 2010-5-31 00:16 標題: EX1 UR 油門線性問題 我唔想次次一開油就爆出去
係未係TH SPPED 入面SET 3 WAY, 跟住TL, TM , TH 應該點SET 好AR?
重有個RP 又係有3WAY
請咁多位師巳指教作者: lukiluk 時間: 2010-6-1 15:59
According to KO Propo Mini-Z Help Center
(http://www.kopropo.com/america/i ... =109&Itemid=153)
Below is their recommended settings for 2.4G transmitter.
2.4GHz ASF Settings
When setting up your 2.4GHz Kyosho Mini-Z with any of our supported KO brand transmitters, you will need the following settings.
•Set the steering Travel to 70 or 70%.
•Set the steering Balance to NO MORE then 70%.
•Set the throttle High Point to 60.
•Set the throttle Brake to 60.
•DO NOT use the Quick Steering or Quick Throttle Response found in the EX-1 UR transmitter.
These settings for your transmitter will help to ensure that you 2.4GHz Mini-Z will operate correctly.作者: wing3pks 時間: 2010-6-2 10:41 回復 2#lukiluk
ching, thank you very very much