RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TT-01 option part? [打印本頁]

作者: Sam_online 時間: 2010-5-31 19:37
標題: TT-01 option part?
Hello every-ching,
i recently bought a TT-01 and i want to upgrade the car to so call full option, wt part should i buy?

作者: lung1 時間: 2010-5-31 23:26
TT01 唔好放太多金錢落去改, 因改極架車既性能亦唔會點提升...
當然有一D BASIC 既PARTS 就一定要換啦,
例如BEARING, 金屬中軸, 頭萬向, 快齒, 尾2度TOE-IN 杯 & 油壓...
記住買TAMIYA, 其他牌子就唔好啦......

作者: Sam_online 時間: 2010-6-1 00:28
oo i see, how much do i need to spent on those option?

作者: alvis425 時間: 2010-6-1 01:40

TT01 唔好放太多金錢落去改, 因改極架車既性能亦唔會點提升...
當然有一D BASIC 既PARTS 就一定要換啦,
例 ...
lung1 發表於 2010-5-31 23:26

登錄/註冊後可看大圖

仲有份金屬轉向

作者: lung1 時間: 2010-6-1 01:47

仲有份金屬轉向
alvis425 發表於 1/6/2010 01:40 AM

登錄/註冊後可看大圖

唔需要改都OK, 用tt-01 E 個份已經無咩虛位

作者: alvis425 時間: 2010-6-1 03:03

唔需要改都OK, 用tt-01 E 個份已經無咩虛位
lung1 發表於 2010-6-1 01:47

登錄/註冊後可看大圖

不過要睇下對應咩SERVO 如果用返星星果個SERVO SAVER 好搞笑
佢裝完之後唔係90度黎可能要用返D可以較果D 黎就返個SERVO 中位

如果個控較到就可以慳返

作者: Sam_online 時間: 2010-6-1 16:19
just bought the option part, but after install the "front uni-way", i can't apply brake on the front wheel, that make it like locking the rear wheel and it's no good, should i replace it back to normal?

作者: KANCHI 時間: 2010-6-2 16:58
tt-01加2~3個8mm介子就唔容易掃牙啦 5.5t都走得

作者: pkmarc 時間: 2010-6-2 17:09
回復 8# KANCHI

放在那裡呢?

作者: jacobchu2007 時間: 2010-6-3 08:21

just bought the option part, but after install the "front uni-way", i can't apply brake on the front ...
Sam_online 發表於 2010-6-1 16:19

登錄/註冊後可看大圖

This is the characteristic of front one way.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)