RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: IS IT TRUE? KO 2.4G Interference Jam problem [打印本頁]

作者: nel3838 時間: 2010-6-11 09:10
標題: IS IT TRUE? KO 2.4G Interference Jam problem
C-Hing moon,

I am hearing some rumours about KO 2.4G interference problem "RF901S 2.4GHz", like jam by futaba 4pk etc. etc.. But then other C-Hing says they have no problem. Is this true or false?

Please share your experience.

作者: hardmankam 時間: 2010-6-11 11:02
Sometimes I cannot bind my KO 2.4 Tx and Rx when I am at the track side. I need to get back inside the room at TC or outside at the parking lot at TRC before they can bind again.

When binded, there is no problem of jamming.

作者: odyssey 時間: 2010-6-12 06:42
本帖最後由 odyssey 於 2010-6-12 06:44 編輯

there was a known issue with binding problems (the transmitter not able to bind with the receiver while power up, the transmitter module LED is flashing for long period) when some futaba 4pk racers stand around the driver stand. this binding issue is able to resolve by sending back for upgrade or repairing. the problem was fixed for more than a year.

if you look in the board of the tx module look and see the color of the board. if its green send it in. if its pink or blue your cool. you can send the radio back to the factory for calibration, they should have no charge, but only mailing cost.

作者: nel3838 時間: 2010-6-14 14:24

there was a known issue with binding problems (the transmitter not able to bind with the receiver wh ...
odyssey 發表於 2010-6-12 06:42

登錄/註冊後可看大圖

Thx C-Hing, do you know where to send the tx module back to factory for upgrading?? Any one can help. And thx for the advice.

作者: nel3838 時間: 2010-6-14 14:36

Thx C-Hing, do you know where to send the tx module back to factory for upgrading?? Any one can ...
nel3838 發表於 2010-6-14 14:24

登錄/註冊後可看大圖

I just contacted World Model (KO distributor in HK), they said now needs fixing cost for upgrading, unlike last year. Oh well. . . .it is what it is I guess....

Thx for advice.

作者: odyssey 時間: 2010-6-14 22:01
本帖最後由 odyssey 於 2010-6-14 22:06 編輯

回復 4# nel3838

If you bought in the place other than North America, you can send your query to KO Japan e-mail: [email protected], they should able to provide the detail information and process on this. they should have no charge (this is the equipment defect), but you have to paid for the mailing cost for both trips...

作者: nel3838 時間: 2010-6-14 22:12

回復 nel3838

If you bought in the place other than North America, you can send your query t ...
odyssey 發表於 2010-6-14 22:01

登錄/註冊後可看大圖

Thanks for the advice, I will shall give them a try.
Cheers

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)