RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Cougar 零件 [打印本頁]

作者: chiuchiu 時間: 2010-6-13 11:33
標題: Cougar 零件
本帖最後由 chiuchiu 於 2010-6-13 11:49 編輯

昨天收到快xcall 嘩!!!!小有!!

成堆零件翻賃,我破了產啦!

各手足有cougar就快D掃貨啦!

[attach]383696[/attach]

作者: jeffip97 時間: 2010-6-13 12:29
you are so rich!!!

作者: joho 時間: 2010-6-13 12:49
Do Jet have 80T Spur? You will need it when you run modify motor...

作者: chiuchiu 時間: 2010-6-13 14:07
本帖最後由 chiuchiu 於 2010-6-13 14:11 編輯

回復 3# joho

joho Gor!齊好架車先,用D普通料test 先再改其他料.

但呢架車

我與mini gor!check過,頭擔好弱,所從我買齊頭擔之零件!!!!!!

作者: joho 時間: 2010-6-13 22:02
本帖最後由 joho 於 2010-6-13 22:12 編輯

Actually, the front end may be stronger then you think, I have finish the first race with it and I did not break anything at all. However, the original 83T spur limit your selection on pinion to max 24T, and even 83/24 cannot give me the correct the gear ratio for a 8.5T motor, which I feel is ideal for racing 2WD modify.

I end up using a 6.5T for the race just to have enough speed. Ofcause, the car is harder to drive this way. Got TQ and finish A2 for the first race of the Cougar, very happy about it!
[attach]383848[/attach]

作者: minimini 時間: 2010-6-13 22:55
早買早享受..........buy la buy la..........

作者: rk2 時間: 2010-6-14 15:28

Actually, the front end may be stronger then you think, I have finish the first race with it and I d ...
joho 發表於 2010-6-13 22:02

登錄/註冊後可看大圖

OH !! Such a good machine .

Congratulations to your good race result as well/

作者: joho 時間: 2010-6-14 16:50
Thank you! I had alot of fun that day for the race! Hope you guys can joint us somtime!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)