RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 使用LiFe要磨電池位? [打印本頁]

作者: prodanny 時間: 2010-6-19 23:36
標題: 使用LiFe要磨電池位?
今日想去買LiFe電玩, 老闆話要先磨電池位, 請問各位師兄應怎樣磨呢? 整完之後可唔可以再玩番AAA電? 謝謝指教!

作者: kelvin1024 時間: 2010-6-24 09:28
Is that R246 or others ? I'm using R246 with MR03 don't seem to have such trouble .

作者: 2slow 時間: 2010-6-24 09:34
我玩AWD用 R246 Li-Fe 唔須要磨電位喎

作者: prodanny 時間: 2010-6-24 23:47
謝謝師兄指教, 我係指IP出既LiFe電, 我見形狀同R246版基本一樣.

本來上星期想買, 但KWS店老闆話要磨車架, 所以我請教各位師兄, 再作決定.

用過LiFe電既師兄, 覺得同NiMH電比, 係咪值得投資呢?

作者: kelvin1024 時間: 2010-6-25 14:42
I'm using R246 , is much better than NIMH , More stable and powerful

作者: 2slow 時間: 2010-6-25 15:05

I'm using R246 , is much better than NIMH , More stable and powerful
kelvin1024 發表於 2010-6-25 14:42

登錄/註冊後可看大圖

May i ask how long you play using R246 Li-fe after one full charge?

作者: kelvin1024 時間: 2010-6-27 03:26

May i ask how long you play using R246 Li-fe after one full charge?
2slow 發表於 2010-6-25 15:05

登錄/註冊後可看大圖

By using 0.6A charge it can run for 17~25 mins , but manual said don't let the batt being low voltage , so I will stop to play every 17Mins.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)