RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 摩打散熱風扇取電問題 [打印本頁]

作者: Powershot 時間: 2010-7-7 20:34
標題: 摩打散熱風扇取電問題
請問摩打散熱風扇條紅, 黑電線, 應該焊o係電變度取電, 定係o係接收度取電呢?

作者: Noir.KAZE 時間: 2010-7-7 21:07
接收
用servo用果d插頭插落接收度

作者: singlau714 時間: 2010-7-7 21:32
Better 焊o係電度取電 (T-plug). My frd burnt jor his 接收 becoz of plugging in the Motor fan ar.

作者: Noir.KAZE 時間: 2010-7-7 22:14

Better 焊o係電度取電 (T-plug). My frd burnt jor his 接收 becoz of plugging in the Motor fan ar.
singlau714 發表於 2010-7-7 21:32

登錄/註冊後可看大圖

咩風扇咁強勁??
我兩隻SANWA接收都係插TP風扇
兩隻都冇事wor

作者: AMAT 時間: 2010-7-7 22:36
要睇下你果隻係乜牌子風扇喇.....靚牌子....如MUCHMORE(唔知仲有冇....)果O的,用電量低,但係又轉速快,咁就冇事.....
但係部份比較平價O既.......萬一扯電太勁......多過接收上限......咁就會.....燒!
好多接收都係得2-3A上限......

作者: Powershot 時間: 2010-7-7 23:18
本帖最後由 Powershot 於 2010-7-7 23:19 編輯

我o個個係3 racing, 上面寫住 0.08A, 咁我應該o係邊度取電? 係咪焊埋落電變供電俾電變風扇o個個位度呢?

作者: singlau714 時間: 2010-7-7 23:33
回復 4# Noir.KAZE

Um.. the situation was quite strange la: The orientation of the fan was not correct so that its magnetic field goes against the magnetic field of the Motor, and.. as you know, the fan got stuck and could not rotate la. But then my frd didn't realize wo.... so the fan kept taking current from the receiver.. and finally... receiver burns jor !

作者: singlau714 時間: 2010-7-7 23:35
回復 6# Powershot

焊o係T-plug 度 !! 100% safe for other electronics and the fan has good electricity supply.

作者: Powershot 時間: 2010-7-7 23:46
回復 8# singlau714

T-plug 即係t 插位??

作者: singlau714 時間: 2010-7-7 23:50
回復 9# Powershot

Yes ar. 焊 together with the red/black wires from the ESC, so that once u connect battery, the fan will start la (even the ESC is turned off). sorry ar... i can't type chinese....

作者: Powershot 時間: 2010-7-7 23:58
回復 10# singlau714

咁可唔可以焊落另一個位: 電變散熱風扇駁電變o個個位呢?

作者: samuel20461 時間: 2010-7-8 00:27
我覺用電變散熱風扇駁電變o個個位安全D.
上星期在TC燒了3把Teampower.就是直接電位.(Fan冇標明voltage)

作者: Andrew168 時間: 2010-7-8 11:02
本帖最後由 Andrew168 於 2010-7-8 11:06 編輯

注意 input 電壓, 可以旳話, 直接由電池攞電俾 fan 用, 我全部直接由電池俾電

作者: AMAT 時間: 2010-7-8 20:48

回復 Noir.KAZE

Um.. the situation was quite strange la: The orientation of the fan was not corr ...
singlau714 發表於 2010-7-7 23:33

登錄/註冊後可看大圖

冇錯,所以如果個風扇俾個摩打磁吸住轉唔到....就會係咁扯電....最後就係扯到燒接收....

所以最好焊係電池到.

如果你好有信心果隻風扇唔會俾摩打磁石吸到,又O岩電壓,咁先好插落接收到.

作者: 93461612 時間: 2010-7-8 22:25
咁3racing嘅風扇散熱可吾可以頂到7.4ｖ？

作者: jeffip97 時間: 2010-7-8 22:32
請問ONLY風扇WHERE有得買??我見全部都同ESC一齊

作者: singlau714 時間: 2010-7-9 01:29
回復 16# jeffip97

Hung Sing. I saw many there.

作者: jeffip97 時間: 2010-7-9 08:10

回復 jeffip97

Hung Sing. I saw many there.
singlau714 發表於 2010-7-9 01:29

登錄/註冊後可看大圖

THX!!!!!

作者: Powershot 時間: 2010-7-11 02:37
回復 15# 93461612

個風扇上面寫住7.2v...

作者: Powershot 時間: 2010-7-11 02:39
回復 14# AMAT

咁係咪唔好焊落電變度?
個風扇上面寫7.2v, 如果由接收取電, 電壓唔啱的話, 會係燒接收定係風扇?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)