RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區
標題: Flying Fox Outdrives XRAY T3 新款直濕 [打印本頁]
作者: lung1 時間: 2010-7-20 23:05
標題: Flying Fox Outdrives XRAY T3 新款直濕
本帖最後由 lung1 於 2010-7-20 23:06 編輯
XRAY T3 新款直濕
Flying Fox RC has released what we believe to be a great option part for the T3(or any Xray using a composite spool). Our Aluminium spool outdrives are made from American, not swiss aerospace quality 7075 Aluminium and anodized black for extra hardness and a stealth look. Our outdrives have a larger diameter equal to the driveshaft blade, 12mm rather than 10mm. This greatly increases blade life compared using Xray aluminium outdrives. In testing, people have had blades last for weeks! They also don't have the problem of catching the driveshaft pin in a notch like the composite outdrives do. This notch will bind your suspension on power and brakes! Also in testing none have been broken. Hope you all like how they look.
These are for 52mm driveshafts and a version for the 50mm driveshaft is less than a week away.
-
作者: rcytong 時間: 2010-7-20 23:32
how much???
作者: console001 時間: 2010-7-20 23:58
milkboy 會唔會搞團購呀 ?
作者: rcytong 時間: 2010-7-21 00:35
Does it mean it is not available at KWS?
作者: milkboy 時間: 2010-7-21 03:33
@@'''''''
USD$24 一set
訂5set，運費係US$10-
US$130-，
Paypal 約 7.9算......
$206-HKD 一 SET
Ricky........威威........Terry.......亞德........Raymond.......亞 Joe......亞良............
又出發喇.....
^^~
作者: LeoChan 時間: 2010-7-21 03:50
Oh !
use can fast ?
作者: 暴風超音 時間: 2010-7-21 10:06
Oh !
use can fast ?
LeoChan 發表於 2010-7-21 03:50
use can fly
作者: hk_sdu 時間: 2010-7-21 11:55
http://www.flyingfoxrc.com/products.htm
Note: Composite spool and driveshafts not included.
So, it only come with a pair of Aluminium outdrive. Good design but expensive?
作者: pskyng 時間: 2010-7-21 12:12
但佢係 加硬 12mm 厚杯屎 ,又有 52同50揀. 美國貨.都係 $206 (milkboy兄價), 都唔錯.
, 可惜我得t2.
CV萬向買 ATM 牌都要 $300左右, xray 聽話要4-5xx , 我諗唔跟都好正常。
作者: console001 時間: 2010-7-21 12:35
本帖最後由 console001 於 2010-7-21 12:42 編輯
回復 5# milkboy
OK~ If you order, I want two set~
Thx !
作者: rcytong 時間: 2010-7-21 13:20
Atomic 有出呢對杯 HK$120, 重用Steel做,應該比alu更durable.
作者: salim 時間: 2010-7-21 14:25
Aluminium is comparatively a soft material and I prefer using steel...
作者: hk_sdu 時間: 2010-7-22 02:55
Atomic 有出呢對杯 HK$120, 重用Steel做,應該比alu更durable.
rcytong 發表於 2010-7-21 13:20
Really? Is it 12mm thick that can totally cover the blade area?
作者: Noir.KAZE 時間: 2010-7-22 08:46
Really? Is it 12mm thick that can totally cover the blade area?
hk_sdu 發表於 2010-7-22 02:55
like this
作者: arto6 時間: 2010-7-23 11:54
回復 5# milkboy
我唔諗住先了, 手車咁屎, 唔搵個位爆下,就唔爆直濕杯, 就爆狗骨;爆bearing;爆直濕牙
作者: hk_sdu 時間: 2010-7-23 13:25
like this
Noir.KAZE 發表於 2010-7-22 08:46
No, not thick enough, yours is same as xray design? ATOMIC?
作者: hk_sdu 時間: 2010-7-23 13:25
回復 milkboy
我唔諗住先了, 手車咁屎, 唔搵個位爆下,就唔爆直濕杯, 就爆狗骨;爆bearing;爆直濕牙
arto6 發表於 2010-7-23 11:54
GOOD POINT!
作者: console001 時間: 2010-7-23 14:42
係一次發瘟直插角鐵之下, 個杯變成咁, 都幾come撞架...
(original xray parts)
