072210125852.jpg (183.77 KB, 下載次數: 27)
2010-7-22 15:52 上傳
作者: 搖控新手 時間: 2010-7-22 16:12
Start making VDF last night, worlk till midnight 2:30am.
Maybe can finish tonight midnight!
gimsink 發表於 2010-7-22 03:52 PM
很勁很專業的車
，為甚麼要用卡呎？ 
作者: RCMan_2006 時間: 2010-7-22 16:20
玩模型必備 !
作者: sean 時間: 2010-7-22 16:23
為甚麼要用卡呎？
有什麼問題？唔係好正常咩？
作者: 搖控新手 時間: 2010-7-22 16:25
因為我砌過的雙星車不用set車，以前的車一砌好便玩得，不知可能這架要set車
作者: sean 時間: 2010-7-22 16:34
哦... 好似砌推桿之類經常會用得着架。冇咗卡尺就慘了！
Gimsink 師兄，請問知唔知呢部放唔放到方形硬case Lipo 電架？
作者: ATSE1 時間: 2010-7-22 18:41
ching,你架VDF埋單幾多文錢?
我想睇下投唔投資好
作者: gimsink 時間: 2010-7-22 19:14
LiPO hardcase OK. No problem.
The kit was HK$2240 from WG, but maybe need to upgrade the suspension mount and c-hub later, the kit's plastic is a bit soft, usually I will change it when it break later. Some ching like to buy many options before they start assembly the kits. So it's hard to tell 埋單幾多錢.
作者: gua110 時間: 2010-7-22 21:45
砌推桿之類經常會用得着架。冇咗卡尺就慘了
作者: 搖控新手 時間: 2010-7-22 21:58
說明書有個1:1 個圖給你度
作者: ryancmlam 時間: 2010-7-22 22:02
回復 8# gimsink
as those parts are so soft, they are not easily to be broken
作者: Noir.KAZE 時間: 2010-7-22 22:02
你都係玩返TT-01算吧啦施主......
冇SET車架都算.......連卡尺都懶去買的話真係........
作者: 搖控新手 時間: 2010-7-22 22:05
本帖最後由 搖控新手 於 2010-7-22 22:09 編輯
即是砌TA05一定要有卡呎？買把電子卡呎唔平
我對TA05都很有興趣
在網睇說明書，真的很多要用卡呎度喎，你是正確的
作者: kc001 時間: 2010-7-22 22:10
電子卡尺鴨記大把, 平既三百有找
作者: 威威 時間: 2010-7-22 22:12
回復 13# 搖控新手
買把大陸仔電子卡尺都係舊零水炸!
呢d錢唔慳得架!
作者: 搖控新手 時間: 2010-7-22 22:15
我有把超舊卡呎，唔知用不用得，殘到爆，二十多三十年歷史
作者: Noir.KAZE 時間: 2010-7-22 23:13
我都唔係用電子尺
果陣set完再搵camber尺度都冇錯到
之後懶到用set車架,唔洗煩
作者: gimsink 時間: 2010-7-23 08:27
Basically finish, will install electronics + server this weekend.
Any ching can suggest a cheaper but good quality server ? high speed or high torque better for drift ?
Body post too long, very ugly !
IMGP2129.JPG (702.84 KB, 下載次數: 24)
2010-7-23 08:27 上傳
作者: gimsink 時間: 2010-7-24 22:46
I found out a very old shell in my warehouse, I used it for my Lazer ZX on-road buggy 20yrs ago...already forgot what shell is it la, maybe FORD ??
Maybe not bad to use with the VDF, haha !
IMGP2143.JPG (676.33 KB, 下載次數: 23)
2010-7-24 22:46 上傳
作者: ogamychen 時間: 2010-7-24 23:39
哇， 流晒口水
作者: milkboy 時間: 2010-7-24 23:42
回復 20# gimsink
FORD RS 500 COSWORTH
^^b
Good body shell.
呢個都係經典車殼~~~~~~
正野....
作者: Evo5 時間: 2010-8-12 09:28
Basically finish, will install electronics + server this weekend.
Any ching can suggest a cheaper b ...
gimsink 發表於 2010-7-23 08:27 AM
嘩！乜要用server架咩？我公司用的server要成十萬八萬架喎師兄，只有速度分，冇扭力分架喎。
作者: gimsink 時間: 2010-8-12 10:19
Yes you need to mount an HP or IBM server on top of the chassic to calculate the on-line data of ESC o/p + Motor speed/torque + Battery consumption data, and it will auto-adjust the optimum performance of the car......but I do not have 十萬八萬, so I give up the server and install a cheap servo to "human adjust" the performance hahaha...
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |