P230710_11.47.jpg (79.91 KB, 下載次數: 7)
2010-7-23 11:56 上傳
P230710_11.45.jpg (92.17 KB, 下載次數: 7)
2010-7-23 11:56 上傳
作者: JAMJAM 時間: 2010-7-23 12:00
已經玩緊t3, 有冇第二選擇呀? 當無撞先, 用4TURN BRUSHLESS, 50c电 架e4rs會唔會好易散?
作者: lung1 時間: 2010-7-23 12:13
how about losi JRXS Type-R?
作者: 丘比凸 時間: 2010-7-23 12:17
4.0就吾知
我5.5撞到飛起打幾個轉落地都無事
其他師兄仲以為我架係tt01
作者: move7648 時間: 2010-7-23 12:23
玩緊x2
total agree above point!
作者: JAMJAM 時間: 2010-7-23 12:56
玩緊E4RS
無問題 好好走
係換電麻煩小小
咁個电架fit唔fit Lipo电呀? 洗唔洗再加料定係用尼龍膠紙?
作者: JAMJAM 時間: 2010-7-23 12:58
都幾好喎, parts易唔易買?
作者: 丘比凸 時間: 2010-7-23 13:01
要放大容量lipo就要改高2樓板
好容易用介子攝高
吾洗尼龍膠紙
作者: GigaRacer 時間: 2010-7-23 13:11
What's wrong with your existing T3?
作者: JAMJAM 時間: 2010-7-23 13:18
回復 12# GigaRacer
Nothing wrong ah, very good. Just want to have another car with other turn motor. Don't want to change motor all the time. And want to be 花心大笑 law!
作者: GigaRacer 時間: 2010-7-23 13:22
Then E4RS could be a good choice. At least it has different design. Top, Tamiya, Cyclone, RDX, TC5... all have similar layout as your T3.
作者: JAMJAM 時間: 2010-7-23 13:29
回復 14# GigaRacer
Very agree. But i want gear differential as my current T3. Not sure if TM/Kfactory/other option factory will produce gear differential for E4RS?
作者: GigaRacer 時間: 2010-7-23 13:42
Don't think so, but E4 has sealed ball diff. Dust won't get in easily, so last longer.
作者: GigaRacer 時間: 2010-7-23 14:59
丘比凸 c hing, could you share some setting info? since your car 好好走.
作者: 車仔同學會 時間: 2010-7-23 15:14
小弟部E4JS用4T都冇問題,更何況E4RS呢~
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |