RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TT-01 轉玩 TRF416X 詢問 [打印本頁]

作者: singlau714 時間: 2010-8-2 00:33
標題: TT-01 轉玩 TRF416X 詢問
已玩 TT-01 半年, 打算買 TRF416X, 然後入場玩.
有無什麼額外要加買? 原裝 setting ok ?
Ah...其實 T3, Top Photon 會是更好選擇 ma? 請指教, 師兄們 !!

作者: 肥神 時間: 2010-8-2 01:19
玩咩麼打?咩埸
有幾多預算

作者: mimo 時間: 2010-8-2 01:35

已玩 TT-01 半年, 打算買 TRF416X, 然後入場玩.
有無什麼額外要加買? 原裝 setting ok ?
Ah...其實 T3, ...
singlau714 發表於 2010-8-2 00:33

登錄/註冊後可看大圖

你都打算買416,又問 top 同 t3? 定係未諗到買邊架?
setting 每個場都唔同, 對於416呢類車黎講好難講咩叫原裝setting,因為根本就冇所謂你所講的原裝
額外要買的東西因人而異,要睇你玩抱住咩心態黎玩,同埋你用幾多銀兩黎玩......

作者: singlau714 時間: 2010-8-2 14:38

玩咩麼打?咩埸
有幾多預算
肥神發表於 2010-8-2 01:19

登錄/註冊後可看大圖

Speedpassion ESC + 5.5T Sensored. Wanna play at TRC or TC. Budget not a problem.

作者: singlau714 時間: 2010-8-2 14:39

你都打算買416,又問 top 同 t3? 定係未諗到買邊架?
setting 每個場都唔同, 對於416呢類車黎講好 ...
mimo 發表於 2010-8-2 01:35

登錄/註冊後可看大圖

T3, Top Photon, or 416, which one u recommend lei?

作者: 肥神 時間: 2010-8-2 16:26
我覺得trc比較合適你
多新手玩
d人nice d
架車原裝係跟鋁狗骨,唔come用
買番頭46,尾44mm鐵骨
頭尾牛角下要放4隻0.1mm介子,前後加埋8隻
珠差最好唔用喇
要方便就買atomic牙差,但玩100粒電左右就會死
用3000度油
要come玩,玩極都唔死呢,就買xray nt1尾牙差自己換416pulley落去
可用1500度油
原裝setting轉少少野可以好好跑
係需要roll-center上比少少心機
頭尾轉用分體碼會好d

作者: singlau714 時間: 2010-8-2 16:45
回復 6# 肥神

Thanks 肥神 ching. Even 416X also need all these hop-ups ma? So, 416 will need even more hop-ups?
Btw, me and my frd played once at TRC la. We may meet u later.

作者: buzzybee82 時間: 2010-8-2 17:02
416 should have a new version coming out (maybe 417, not announced yet) you should wait until the "world cup" is finish in august before buying

作者: singlau714 時間: 2010-8-2 17:22
回復 8# buzzybee82

Oh.. so even 416X will become even cheaper after new version is released later ??
Thanks for your news, ching.

作者: 肥神 時間: 2010-8-2 17:39
回復 7# singlau714

其實全原裝係無問題的,
但係我自己架416會轉埋反帶
都係買左車先啦~有咩唔明上呢問

作者: buzzybee82 時間: 2010-8-3 00:31

回復 buzzybee82

Oh.. so even 416X will become even cheaper after new version is released later ...
singlau714 發表於 2010-8-2 17:22

登錄/註冊後可看大圖

It should.....but just be sure that you will have enough parts for your 416 after the new model comes out

作者: 肥神 時間: 2010-8-3 01:04
c兄,如果你想睇下nt1牙差轉416pulley係點..你入去
http://bbs.rc-evo.com/viewthread ... page%3D1#pid1714333 23樓啦~~

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)