RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: how to make 尾直濕 [打印本頁]

---

作者: alan0108    時間: 2010-8-20 15:11
標題: how to make 尾直濕
i am using tt01d type E

thx for your sharing

---

作者: hardmankam    時間: 2010-8-20 15:15
cheapest way: stick tissue paper into the gear.

---

作者: AMAT    時間: 2010-8-20 19:44
冇錯,塞紙巾落去就OK,不過最好加小小泥膠,如寶貼萬用膠,咁會更耐用

---

作者: GSXR600    時間: 2010-8-20 20:15
C HING
想問珠差 正 直濕 點攪好?   謝謝

---

作者: hardmankam    時間: 2010-8-20 20:31
Tight the screw as much as possible.  

But changing a ball diff to a spool is NOT the best idea since the diff balls will dent the diff plates.

---

作者: hardmankam    時間: 2010-8-20 20:44
Another way is to cut 2 matching sticky rings and place them between the diff plate and the gear.  Do not use the diff balls.  Then tighten as much as possible.  (see photo ... taken http://www.drccentral.com/forums ... opic=10175&st=0)

登錄/註冊後可看大圖