RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Sakura Zero 牙差 can use in Xray T3? [打印本頁]

作者: GigaRacer 時間: 2010-9-16 05:56
標題: Sakura Zero 牙差 can use in Xray T3?
Some C hing said Spec-R 牙差 has issue. How about the Sakura Zero 牙差?

Does it fit in Xray T3?

作者: uchifong 時間: 2010-9-16 09:31
xray t3好似唔係 37,38 齒~~~應該用唔到

作者: jf813 時間: 2010-9-16 09:40
T3 use 38T diff wor. I know the pitch of the belt is same. But not sure if you can fit a sakura diff in a T3......

作者: uchifong 時間: 2010-9-16 10:11

T3 use 38T diff wor. I know the pitch of the belt is same. But not sure if you can fit a sakura di ...
jf813 發表於 2010-9-16 09:40

登錄/註冊後可看大圖

IS IT~~~~THEN would be ok~~

作者: jf813 時間: 2010-9-16 11:55
回復 4# uchifong

Hum..... I think it should. but sorry I don't have a T3 so can't try it.......

作者: lung1 時間: 2010-9-16 13:49
3racing gear diff have a big big issue wor.....................

作者: GigaRacer 時間: 2010-9-16 14:23

3racing gear diff have a big big issue wor.....................
lung1 發表於 2010-9-15 21:49

登錄/註冊後可看大圖

Really?? How about the Spec-R?? C hing said it needs to be checked every 15-20 packs as well.

作者: 145240370 時間: 2010-9-16 15:18
3racing果隻唔岩T3用
唔係PULLY問題,係個闊度唔岩

作者: jf813 時間: 2010-9-16 15:20
回復 8# 145240370

Thank you ching!!

作者: 黑豹 時間: 2010-9-16 18:51
請問ching, Sakura Zero 牙差,可否裝到415msxx身上呢?thx!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)