原帖由 老人家 於 2006-8-7 01:52 發表
其實以上公式只作理想的参考 , 因一般充電時輸出的電壓一定要比原電壓高才可有效充地去充電 , 所以如你充一節1.2v3600mah充時 , 可能用上1.8v3600ma(3.6A) , 那便不是1小時充滿了 , 又因充電的初期電流電壓 ...
原帖由 edmundsfc 於 2006-8-10 06:14 發表
Help....
After 1hr 40min charge at 2.8A, my 3000mAh battery got very hot. Charger still didn't stop, and the capacity read 4200 on the charger LCD.
I was so concern, so I unplug it.
...
原帖由 Motorman 於 2006-8-9 14:31 發表
if your charger doesn't got (- delta V) adjustment, you have to stop the charger manually when you see the reading around 3100 and 3200 mAh...... otherwise, your battery will be overcharged. If ...
原帖由 edmundsfc 於 2006-8-10 06:42 發表
Need to unplug manually?? Then, what's the point to buy a "peak charger"
But 老人家 also mentioned in other post, the LCD could give wrong info.
What should I do 老人家?
原帖由 Motorman 於 2006-8-11 00:52 發表
Nowadays, almost all RC battery charger using "delta V" peak detection. The different between those charger is some could adjust the "delta V" value since different brands o ...
原帖由 老人家 於 2006-8-11 08:35 發表
多謝代答 , 補充一下充電流特性(鋰電除外) , 充至七至八成後正常下温度是會不斷上升 , 可充至3000以外也是正常因早前提個這些錶是哈哈錶只作参考 , 錶所出的數是用充入電×時間 , 無把線和接點 , 充 ...
原帖由 edmundsfc 於 2006-8-11 11:12 發表
Thanks everyone. I went back to the shop and exchanged a slightly better one. 3300mAh this time. No la, can't afford Trinity la. I am already very happy with my HPI RTR Sprint2. Just wan ...
原帖由 edmundsfc 於 2006-8-12 03:59 發表
This time the 3300mAh battery stopped at 3425mAh... great!!
歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |