RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: ECS 進角與 MOTOR的進角怎樣配合?? [打印本頁]

作者: arto6 時間: 2010-10-9 10:19
標題: ECS 進角與 MOTOR的進角怎樣配合??
CHING 們, 我想請教下, ECS 及 MOTOR 都有進角調較, 其實兩者之間有什麼關連, 我應該以MOTOR定係 ESC 的進角為準呢? THX. CHING

作者: Tam 時間: 2010-10-9 13:32
是ECS 進角+MOTOR 進角=final進角.

作者: arto6 時間: 2010-10-9 14:37
咁 MOTOR 咪要SET 負進角先, 再由ESC 0度慢慢加上去30度?? 如果唔係,起不是無(負)進角??

作者: ryancmlam 時間: 2010-10-9 15:38
why you need negative timing angle?

作者: freeboy303 時間: 2010-10-9 18:11
回復 4# ryancmlam

for more torque gua....

作者: arto6 時間: 2010-10-9 18:15
R 晒頭, 咁motor 進角係咪要set (6 點鍾位), 再用 ECS 調較進角呢?

作者: gogoyo123 時間: 2010-10-9 18:20
Sorry may I ask wt is 進角？

作者: freeboy303 時間: 2010-10-9 18:23
回復 6# arto6

motor進角=physically 進角

esc進角=electrically 進角

作者: arto6 時間: 2010-10-9 18:42
ching 們, 如果一隻 4.5T motor , motor 及 ESC 進角應該點set 最安全呢?

作者: Tam 時間: 2010-10-10 10:40
一般會SET ESC 進角. MOTOR 進角 SET 0. 因為SET TURBO 時會方便D. 唔記得拿PROGRAM才SET MOTOR 進角

作者: arto6 時間: 2010-10-10 16:43
thank ching

作者: chowhim123 時間: 2010-10-10 17:19
咁c兄..我用2.1好盈120a+sp 4t摩打!!應該點set~

作者: arto6 時間: 2010-10-10 19:39
我都想知呀

作者: buzzybee82 時間: 2010-10-11 13:37

咁c兄..我用2.1好盈120a+sp 4t摩打!!應該點set~
chowhim123 發表於 2010-10-10 17:19

登錄/註冊後可看大圖

玩4t仲要加進角???? 成王敗寇, 一綫之差........good luck~!!

作者: defcone 時間: 2010-10-12 10:05

ching 們, 如果一隻 4.5T motor , motor 及 ESC 進角應該點set 最安全呢?
arto6 發表於 2010-10-9 18:42

登錄/註冊後可看大圖

I use sp v2.0 pro with 205_g software, max esc timing and middle timing for motor on speed passion v3 4.5t with 7.9fdr. With a fan blowing, no heatsink the motor gets to around 50 deg. celcius after 5 minutes.

作者: hardmankam 時間: 2010-10-12 14:19

I use sp v2.0 pro with 205_g software, max esc timing and middle timing for motor on speed passi ...
defcone 發表於 2010-10-12 10:05

登錄/註冊後可看大圖

That's a very low temp for 4.5t.
Have you compared firmware 205g vs 518mod ?

作者: arto6 時間: 2010-10-12 15:55
多謝 ching 們解答, 另一方面, 點樣先知道每個firmware的特性呢, 同埋而家在trc用4.5t那一個firmware比較好呢?

作者: defcone 時間: 2010-10-13 10:01
I'm going to play with that software on the weekend, my friend told me that 518mod doesn't have much timing. Last time I race on a track with around a 70m long straight I used 422 stock instead as that gave more timing. I watch video of trc track and i don't think you would gain much by running 518mod software, just run 205. With 4t just run 8.9fdr, drrs=whatever you feel comfortable with and max amts.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)