標題: 皮帶車齒輪問題 [打印本頁] 作者: lkh2008 時間: 2010-10-19 19:02 標題: 皮帶車齒輪問題 各位有玩皮帶車o既ching,,我想問下48pitch同64ptch o既齒輪邊款好d??
有人話用64pitch o既齒輪會快d,,係唔係o既呢@@??
我用hobbywing 60a esc配個4300kv犘打,,
如果減速齒用84,,犘打齒用40,,(84/40)x2.4375=5.11875,,
呢個齒比會唔會用得太盡??犘打會唔會頂唔順??
我想架車快d~~作者: Noir.KAZE 時間: 2010-10-19 19:52
64P齒距細,有師兄話會比48P"跟手"
但係64P就好易掃作者: tnrryan 時間: 2010-10-19 21:53
1. 64P好易掃 but more precise.
2. A gear ration of 5.1x for a 4300 kv motor is a bit low. The Speed Passion motor manual recommends a ratio of 6.5 to 8 for a 4400kv motor.
3. It is likely that the 60A ESC will trip due to overheat before your motor demaged.