RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請問有無ching可分享sakura zero setting 在trc [打印本頁]

作者: ericchunkit 時間: 2010-10-25 14:32
標題: 請問有無ching可分享sakura zero setting 在trc
本帖最後由 ericchunkit 於 2010-10-25 14:39 編輯

請問有無ching可分享sakura zero setting 在trc
I went yesterday and it easily oversteered when the car got out of the corner

前:CAMBER       =
TOE IN/OUT    =
車高                      =
彈弓                      =
OIL                      =
頭用油壓架洞       =  內計

後:CAMBER       =
TOE IN/OUT    =
車高                      =
彈弓                      =
OIL                      =
尾用油壓架洞       =  內計

作者: jf813 時間: 2010-10-26 10:14
I see your car on Sunday very loose wor.....  What tires are you using?  Any traction compound?  I use sorex 36 with hara insert and have lot of grip.  I am still play around with my setting but it is as below of now.

前:CAMBER       = 2
TOE IN/OUT    = -1
車高                      =  3.5
彈弓                      = 2.8
OIL                      = 400
頭用油壓架洞       =  sorry can't remember, trying different holes that day

後:CAMBER       = 2
TOE IN/OUT    = 3
車高                      = 4
彈弓                      = 2.7
OIL                      = 400
尾用油壓架洞       =  sorry can't remember as try different hole that day

Not a very good setup but at least it is drivable......  Next time at TRC as Siu Hung to help la.  He play sakura too.  ;)

作者: 小洪 時間: 2010-10-26 12:45
本帖最後由小洪於 2010-10-26 12:58 編輯

前:CAMBER       1.5
TOE IN/OUT    0
車高                   5
彈弓                   hpi 金 (長油壓)
OIL                   50 AE
頭用油壓架洞    3
downstops 6
Anti-roll Bars 1.4
Roll Center 1

後:CAMBER       1.5
TOE IN/OUT    3
車高                      5
彈弓                   hpi 銀 (長油壓)
OIL                      50 AE
尾用油壓架洞 3
downstops 5
Anti-roll Bars 1.4
Roll Center 1

作者: BGZ 時間: 2011-9-25 01:17
回復小洪的帖子

小洪兄, 請問家陣條 track, 呢個 setting 仲o岩唔o岩用呀?

作者: joe2004 時間: 2011-9-25 09:34
hi小紅，請問如用雙星彈弓用什麼顏色呢？

作者: 小洪 時間: 2011-9-25 18:40
本帖最後由小洪於 2011-9-25 18:42 編輯

回復 BGZ 的帖子

前:CAMBER          1.5
TOE IN/OUT          -1
車高                      5
彈弓                      hpi 銀 (長油壓)
OIL                      40 AE
頭用油壓架洞          3
downstops          6
Anti-roll Bars       1.4
Roll  Center          1

後:CAMBER          1.5
TOE IN/OUT          3
車高                      5
彈弓                      hpi  銀 (長油壓)
OIL                      40 AE
尾用油壓架洞          3
downstops          5
Anti-roll Bars       1.2
Roll  Center          1

作者: 小洪 時間: 2011-9-25 18:42
回復 joe2004 的帖子

前、後用黃

作者: BGZ 時間: 2011-9-25 18:48
回復小洪的帖子

Thank you!

, 試試先。

作者: BGZ 時間: 2011-9-25 20:43
請問以上 setting, 要配合什麼差速設定？頭直？牙差幾多度油？

另外，唔用長避震得唔得？長有咩好處？

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)