RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 有無人玩Pro Ten,可否分享吓心得? [打印本頁]

作者: pd    時間: 2010-11-3 07:51
標題: 有無人玩Pro Ten,可否分享吓心得?
本帖最後由 pd 於 2010-11-3 13:03 編輯

請分享!!

作者: RC881    時間: 2010-11-3 14:31
Pro Ten 夠晒速度感 , 曾經睇中CRC Generation-X 10 , 出車唔太貴 , kws catshop $1880 可以接受 , 但係買呔養佢果下野緊要 , Pro Ten 呔比較貴
作者: IS520    時間: 2010-11-3 15:09
pd ching, 果部係咪 XRay X10 Link ?  

呔既損耗 高唔高 呀?
作者: LP640    時間: 2010-11-3 16:16
請各位未買或準備買ProTen嘅ching注意!因為某牌子(X-rxy)係沒一間shop係有parts.連總代理都沒.車友們,玩其它車種
作者: fyin    時間: 2010-11-3 16:59
Hi,
我剛剛上個月個fan就讓咗部CRC X-Gen 10 pro比我, 佢就玩古董Trinity pro ten.
我向JV玩咗2個星期六, 真係好正. 可調性又高又有速度, 維修又簡單.
呔的損耗可接受, 我叻banned}eed 牌子pink 點尾呔, 好拗.
如果啲呔玩完可以套F104綿呔上去. 我就試咗F104 Type B 頭呔.(不過去得好快, 1排電去1mm)
呔都OK有少少推頭, 落呔水就已經OK.
尾呔跑咗12排電都仲可以玩多6~7排電到先要換.
其實向JV玩海綿呔係去得好快, 不論玩1/10, 1/12..等. 我之前玩F103用海綿呔一樣去得好快.
pan 10 有個好係前後車高可以自由調較綿呔可以玩到好薄先換.
Ching, 有時間一齊去JV玩,
作者: pd    時間: 2010-11-3 18:11
Thanks for share , by the way I like to play different car body with my pro ten, 190f. 195r.
作者: hk_sdu    時間: 2010-11-3 18:36
Pro10 is fun if u like to high speed . One more choice later, interesting parties can wait for the 1:10 pan car from TOP. I may try it also.
Now, i can only play with my F103 with GT body at TRC GP track. With 4.5 BL motor, speed is crazy on the straight, the car fly.

enjoy some 200mm pan car video here:
http://www.youtube.com/watch?v=sBqZh23f89w
http://www.youtube.com/watch?v=1uAhPtHxg70
作者: hk_sdu    時間: 2010-11-3 18:40
this one, keeping up with a GP
http://www.youtube.com/watch?v=n8gvlrQi-2Q
作者: abcde    時間: 2010-11-3 19:56
Pro10 is fun if u like to high speed . One more choice later, interesting parties can wait for the ...
hk_sdu 發表於 2010-11-3 18:36

I also only can play my f103 with GT body....but....f103 tire also become less on the market...hope have tamyia HRB later la...
作者: abcde    時間: 2010-11-3 19:59
Pro Ten 夠晒速度感 , 曾經睇中CRC Generation-X 10 , 出車唔太貴 , kws catshop $1880 可以接受 , 但係買呔 ...
RC881 發表於 2010-11-3 14:31


fast fast change the f103GT to leman body...then play with them 扮pro ten la...
作者: pd    時間: 2010-11-3 23:40
play pro ten la !!
作者: kingman7788    時間: 2010-11-3 23:53
brother pd, are you playing pro ten with green shell at JV?
作者: pd    時間: 2010-11-4 00:13
本帖最後由 pd 於 2010-11-4 00:23 編輯
brother pd, are you playing pro ten with green shell at JV?
kingman7788 發表於 2010-11-3 11:53 PM


yes who are you Brother??

作者: kingman7788    時間: 2010-11-4 00:34
yes who are you Brother??
pd 發表於 2010-11-4 00:13


the one who teach u to set your lovely LRP version2 esc
作者: pd    時間: 2010-11-4 00:36
本帖最後由 pd 於 2010-11-4 00:38 編輯
the one who teach u to set your lovely LRP version2 esc
kingman7788 發表於 2010-11-4 12:34 AM


OH !!! Are you ah HON Gor or the other nice young guy??

Anyway 1000 Thankssssss!!!! Will u come this 6 Day??
作者: kingman7788    時間: 2010-11-4 00:43
OH !!! Are you ah HON Gor or the other nice young guy??

Anyway 1000 Thankssssss!!!! Will u co ...
pd 發表於 2010-11-4 00:36

welcome brother, i am going to buy a pro ten this month later, considering xray or crc ,what is your suggestion?
作者: pd    時間: 2010-11-4 00:53
本帖最後由 pd 於 2010-11-4 17:17 編輯
welcome brother, i am going to buy a pro ten this month later, considering xray or crc ,what is yo ...
kingman7788 發表於 2010-11-4 12:43 AM


Xray is out of stock now$18XX, Serpent 10.My frd just buy, the design seems quite GOOD and more metal parts ! $24XX CRC also nice $188X but CRC the parts only sell at Cat Shop, when the parts in stock, all sold out at few days! If back to before I still buy X Ray coz X ray is EP expert, the parts of xray which you can order at KWS for advice around 3 weeks time, the easy damage parts is Spur gear and Tire ! The xray only got 96T on list ONLY!!!! buy unlucky if the one you damaged , you can buy Kawada for instead , coz X ray hope you will buy the pinion gear set for adjust the ratio as solution!! But the kawada use 8 pcs ball insert the spur gear, then the xray use 10 pcs balls ! Don't forget to adjust the ball differential a bit tight coz the RW car is much powerful when you punch ! Other wise it will spin or 180 turn!!!
作者: kingman7788    時間: 2010-11-4 00:56
Xray out of stock$18XX, serpent My frd just buy the design seems quite GOOD and more metal parts ...
pd 發表於 2010-11-4 00:53

thanks, then i may go ahead xray, mushroom seems still have stock. where buy serpent? still have stock?
i am playing T3 and i am satisfy of coz on xray quality.

See u on sat. what time u will be there?
作者: pd    時間: 2010-11-4 00:58
thanks, then i may go ahead xray, mushroom seems still have stock. where buy serpent? still have s ...
kingman7788 發表於 2010-11-4 12:56 AM


may be 12:00 ! The serpent 10 son , you can ask Action Hobby or Heung Sing!!
作者: kingman7788    時間: 2010-11-4 01:01
may be 12:00 ! The serpent 10 son , you can ask Action Hobby or Heung Sing!!
pd 發表於 2010-11-4 00:58


see u sat. , will go to check 10son later. thanks for your info.
作者: hk_sdu    時間: 2010-11-4 01:31
kingman, do forget this one when u are looking for new 10 son, with sufficient parts supply from TOP. But car not release yet.

http://bbs.rc-evo.com/viewthread ... amp;highlight=rebel
作者: hk_sdu    時間: 2010-11-4 01:36
yes who are you Brother??
pd 發表於 2010-11-4 00:13


Hi PD, to share with u my Red Marlboro before i put on the sticker. Very match with your Methol Marlboro. Unfortunately, i am not playing in JV.

What brand is your shell?

作者: pd    時間: 2010-11-4 08:16
My one is vintage protoform Nissan 390 shell ,you can get this one at HEC now. If you need the Marlboro Sticker you can pm !
作者: kingman7788    時間: 2010-11-4 08:47
kingman, do forget this one when u are looking for new 10 son, with sufficient parts supply from TOP ...
hk_sdu 發表於 2010-11-4 01:31


thanks sdu brother, let me check~
作者: fyin    時間: 2010-11-4 11:04
This is my CRC pro 10 for sharing.


                               
登錄/註冊後可看大圖

作者: Marco明    時間: 2010-11-4 11:27
This is my CRC pro 10 for sharing.
fyin 發表於 2010-11-4 11:04

成日係jv見到你架車~~~
nice car~
作者: hk_sdu    時間: 2010-11-4 15:38
This is my CRC pro 10 for sharing.
fyin 發表於 2010-11-4 11:04


Nice, all of u are using vintage body. Is any one of your body appear in this page?

http://www.rcmart.com/catalog/bo ... ody-c-438_1319.html
作者: benz1850    時間: 2010-11-4 16:05
X-Ray's rear axel will die very soon, and unable to locate parts.  however, you can change it with whole set of CRC diff.   So, play CRC la.....Let me prepare my CRC to play at JV sin....ke..ke...
作者: fyin    時間: 2010-11-4 17:58
Wellcome to join Pro Ten World!
CRC shift sell $200 at Cat shop.
作者: airyu    時間: 2010-11-5 12:07
for serpent s100 you can find it at 1/f
作者: pd    時間: 2010-11-6 23:16
明早玩pro Ten , 有興趣就嚟啦!




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2