closed~~~~~~~~~~~ - RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

IMG_1610s.JPG (279.99 KB, 下載次數: 13)

2010-11-16 22:04 上傳

作者: antison 時間: 2010-11-17 00:03
幾錢呀？

作者: GigaRacer 時間: 2010-11-17 01:33
本帖最後由 GigaRacer 於 2010-11-16 15:48 編輯

very nice!!! very poison......

My favorite color has been changed from silver (t2008), to gold (t3), to purple........TCX

作者: yeeha0518 時間: 2010-11-17 05:07
回復 2# powis
ching,u play many turns motor? and teeth ratio is?

作者: yeeha0518 時間: 2010-11-17 05:08
回復 3# antison
around $3280 to $3580~

作者: powis 時間: 2010-11-17 07:35

very nice!!! poisoning......

All purple parts are original? Does it come with that Lipo batte ...
GigaRacer 發表於 2010-11-17 01:33

登錄/註冊後可看大圖

Yes with Lipo mount.

作者: powis 時間: 2010-11-17 07:35

回復 powis
ching,u play many turns motor? and teeth ratio is?
yeeha0518 發表於 2010-11-17 05:07

登錄/註冊後可看大圖

I play 4.0R, gear ratio is around 9.2:1.

作者: yeeha0518 時間: 2010-11-17 08:45
回復 8# powis
ching,u use ??motor gear and play original car,not add some options?
u play on jv???

作者: yokomo 時間: 2010-11-17 08:51
Are u using the original spring?

Thanks All !!

作者: yeeha0518 時間: 2010-11-17 09:09
本帖最後由 yeeha0518 於 2010-11-17 09:18 編輯

回復 10# yokomo
original is good la,medium form~

作者: siubao169 時間: 2010-11-17 09:20
purple color is great

作者: powis 時間: 2010-11-17 12:02
回復 9# yeeha0518

Not put it on JV but on other track.

作者: yokomo 時間: 2010-11-17 12:17
回復 11# yeeha0518

Do u know the hardness of original? Actually I got one set 2nd hand TCX but the color of those springs cannot be seen.
Thanks All !!

作者: yeeha0518 時間: 2010-11-17 12:36
本帖最後由 yeeha0518 於 2010-11-17 12:38 編輯

回復 14# yokomo
the colour have different,soft and hard just for your setting u play on where,the price not over $100

and can u post your car here??? can see more details,thx~

作者: lung1 時間: 2010-11-17 12:48
好車但無零件, 就算有都超貴..............

作者: yokomo 時間: 2010-11-17 12:56
回復 15# yeeha0518

Sure, I will post some pics later on.
Thanks All !!

作者: yeeha0518 時間: 2010-11-18 14:58
回復 2# powis

ching,your servo is what brand???

作者: powis 時間: 2010-11-18 17:10

回復 powis

ching,your servo is what brand???
yeeha0518 發表於 2010-11-18 14:58

登錄/註冊後可看大圖

It is Futaba BLS551.

作者: yeeha0518 時間: 2010-11-18 18:58
回復 19# powis
how much is it??? and the response time how many second ar?

作者: 殘酷★玫瑰 時間: 2010-11-18 22:17
支持令車,,,,,,,,,,

作者: Oakfield 時間: 2010-11-21 18:18
What difference between BD and this??
Seems same design.

作者: ALEXANDER 時間: 2010-12-26 17:17

好車但無零件, 就算有都超貴..............
lung1 發表於 2010-11-17 12:48 PM

登錄/註冊後可看大圖

點會冇parts?!
係你搵唔到姐~

作者: yokomo 時間: 2010-12-28 08:52
Some parts can be available in "Cat Shop".

Thanks All !!

作者: GigaRacer 時間: 2010-12-31 08:04
本帖最後由 GigaRacer 於 2010-12-30 18:26 編輯

Saw one at the track today........ nice and fast.

sum c c now.....

btw, any gear diff for TCX?

TCX dampers ok? No need to change to TRF, right?

作者: keithlaw 時間: 2011-3-17 11:04
TCX 多唔多人玩?
我好鐘意紫色.
我想問買左之後有冇野可以改? 定原裝已經改晒??
sorry 我未玩過高級車, 所以唔知
我考慮緊一係 Yokomo 一係 TCX

作者: EC5WVR4PRO4 時間: 2011-3-17 11:10

TCX 多唔多人玩?
我好鐘意紫色.
我想問買左之後有冇野可以改? 定原裝已經改晒??
sorry 我未玩過高級車 ...
keithlaw 發表於 2011-3-17 11:04 AM

登錄/註冊後可看大圖

HB/TCX is stronger than Yokomo

作者: keithlaw 時間: 2011-3-17 11:11
HB/TCX 你日本車定美國??

作者: hkwcc00 時間: 2011-3-17 11:35
回復 28# keithlaw

呢類頂級車都無咩好或者可以改,最多都換返個尾牙差

作者: Lomomo 時間: 2011-3-17 11:37

HB/TCX is stronger than Yokomo
EC5WVR4PRO4 發表於 2011-3-17 11:10

登錄/註冊後可看大圖

係專區問, 點會話YOKOMO勁D

作者: keithlaw 時間: 2011-3-17 11:46
= =" 都唔可以咁講既. 我相信會有D人好中立

作者: Lomomo 時間: 2011-3-17 12:03

= =" 都唔可以咁講既. 我相信會有D人好中立
keithlaw 發表於 2011-3-17 11:46

登錄/註冊後可看大圖

嗯, 都岩!

不過TCX好似唔太多人玩/講(JV計)

作者: EC5WVR4PRO4 時間: 2011-3-18 01:22

係專區問, 點會話YOKOMO勁D
Lomomo 發表於 2011-3-17 11:37 AM

登錄/註冊後可看大圖

亞 Lomomo師兄,keithlaw師兄都話''我考慮緊一係 Yokomo 一係 TCX''...咁我係咪唔可以係 HPI TCX 玩家專區內不能夠答其它品牌呢?如果係嘅話,我只能講句唔好意思......

作者: Lomomo 時間: 2011-3-18 03:36

亞 Lomomo師兄,keithlaw師兄都話''我考慮緊一係 Yokomo 一係 TCX''...咁我係咪唔可以係 HPI TCX 玩家專 ...
EC5WVR4PRO4 發表於 2011-3-18 01:22

登錄/註冊後可看大圖

唔係咁意思, 講乜都得
只是斷估係TCX區, TCX玩家不會插自己部車, 應該比較唔到咩結果

作者: keithlaw 時間: 2011-3-18 09:52
就係TCX區所以先有讚有彈. 每架車都有自己缺點

作者: Lomomo 時間: 2011-3-18 11:45

就係TCX區所以先有讚有彈. 每架車都有自己缺點
keithlaw 發表於 2011-3-18 09:52

登錄/註冊後可看大圖

有讚有彈, 理論上, yes, 實際上....

Anyway, 希望你得到比較結論, 我都想知的

作者: keithlaw 時間: 2011-3-21 15:48
想問點解 Jet hobby 成日冇貨?? 係唔係冇$???

作者: Marco明 時間: 2011-3-21 15:57

想問點解 Jet hobby 成日冇貨?? 係唔係冇$???
keithlaw 發表於 2011-3-21 15:48

登錄/註冊後可看大圖

HB野係香港不嬲都罕見......ching唔使咁激動.....係正常的

作者: keithlaw 時間: 2011-3-21 17:19
點解罕見 ? 我見佢成績都唔差丫

作者: isaac_ng 時間: 2011-3-23 22:13
在国内都几多人玩啊，虽然依然很多时候是没件的！

作者: GigaRacer 時間: 2011-3-25 04:24
TCX Exotek!!

http://exotekracing.com/EXOTEK_NEWS/Entries/2011/2/10_XX.html

作者: GigaRacer 時間: 2011-5-4 07:41
I want to use steel shaft in front. 46mm, will the Tamiya one work?

作者: ahho 時間: 2011-5-4 23:10

GigaRacer 發表於 2011-5-4 07:41

登錄/註冊後可看大圖

I want to use steel shaft in front. 46mm, will the Tamiya one work?

買個 ROCHE heavy duty spool set for HB TCX
便可用Tamiya 46mm。

作者: GigaRacer 時間: 2011-5-4 23:55
回復 ahho 的帖子

c hing, what is it? Can't find it anywhere from web. Any picture?

作者: ahho 時間: 2011-5-9 21:13

GigaRacer 發表於 2011-5-4 23:55

登錄/註冊後可看大圖

回復 ahho 的帖子

c hing, what is it? Can't find it anywhere from web. Any picture?

http://www.roche.hk

登錄/註冊後可看大圖

IMG_3576r.jpg (198.79 KB, 下載次數: 11)

下載附件

2011-5-9 21:12 上傳

作者: GigaRacer 時間: 2011-5-10 00:41
本帖最後由 GigaRacer 於 2011-5-9 12:42 編輯

回復 ahho 的帖子

Thank you, c hing. Looks nice. Will sure try it.

I am using Top's shafts. Will they fit?

作者: GigaRacer 時間: 2011-5-10 11:09
Roche ordered!! Just hope it comes quickly.

作者: GigaRacer 時間: 2011-5-10 15:18
The TCX is getting more expensive to maintain....

作者: ahho 時間: 2011-5-11 03:12

GigaRacer 發表於 2011-5-10 15:18

登錄/註冊後可看大圖

The TCX is getting more expensive to maintain....

都係買多左牙差同頭直~
之後既損耗品同其他品牌差不多!

作者: GigaRacer 時間: 2011-5-11 11:07
回復 ahho 的帖子

I tried to put Xray's multi diff into the TCX front, and Xray's ball diff into TCX rear with Xray 50mm bones. Perfect fit!!!! Now the car looks solid!! Front belt tension is ok. Rear belt little loose. Tried Xray T3 belt, but toooo tight. I will race with this until the TCX spoon and gear diff arrived.

作者: ahho 時間: 2011-5-12 01:13

GigaRacer 發表於 2011-5-11 11:07

登錄/註冊後可看大圖

回復 ahho 的帖子

I tried to put Xray's multi diff into the TCX front, and Xray's ball diff into TCX ...

都有朋友改用全Xray頭尾萬向直濕牙差!貪佢夠堅硬!!!

作者: GigaRacer 時間: 2011-5-12 01:45
回復 ahho 的帖子

Do you know what rear belt they use? If Xray, what length? Thanks!

作者: nghoming 時間: 2011-6-5 17:37
想問下hpi有無出三節棍for tcx ??

作者: jos2002219 時間: 2011-6-6 10:22
幾錢呀幾錢呀

作者: nghoming 時間: 2011-6-6 11:36
我都想知呀！！

作者: GigaRacer 時間: 2011-6-6 12:30
This?

http://www.hotbodiesonline.com/products/en/67699.html

Don't know how much, but 三節棍 has its disadvantage.

作者: ahho 時間: 2011-6-6 14:22
Arrowmax spring steel
http://www.freemaxmp.com/ProShow.asp?ID=464

作者: nghoming 時間: 2011-6-7 01:48
回復 ahho 的帖子

師兄，想問下用呢枝三節棍係咪要換個長d的直濕杯先用到呢？
因為我都有一對，但發覺原裝個直濕杯唔夠長
thx

作者: Horses 時間: 2011-6-7 18:45
回復 GigaRacer 的帖子

Yes, the spool cups are fit for Yokomo & TOP dogbone also. If you want to use 44mm dogbone, you can order new spool cups TRF-02. This is longer. Thanks

作者: GigaRacer 時間: 2011-6-8 04:44
Roche works great, but now I have a gear diff with 300k oil in it.

作者: RcMagician 時間: 2011-6-9 08:57
大家好！我係上一代嘅玩車人，對現在的新esc、brushless motors、lipo電的知識很少，希望各位ching多多指教。我剛剛砌好部TCX，配team Powers esc 70a +13.5t有感,現在用原裝大減齒配31t摩打齒,齒比係7.23，這是TCX說明書的建議。但我見TP esc張說明書卻寫13.5t建議齒比是4.3。請問齒比跟邊個才對？是否我誤解了說明書，我的組合用31t對嗎？希望指教。另外我部車轉向時前軨會頂到前脾，我要把轉向角向減至70%止才解決到問題，正常嗎？還是我砌車時出錯？

作者: GigaRacer 時間: 2011-6-9 12:20
本帖最後由 GigaRacer 於 2011-6-8 20:21 編輯

RcMagician 發表於 2011-6-8 16:57

登錄/註冊後可看大圖

大家好！我係上一代嘅玩車人，對現在的新esc、brushless motors、lipo電的知識很少，希望各位ching多 ...

TP said 4.3, that mean the esc has no turbo. If you are not racing, I will use around 5.5 - 6 gear ratio. Easier on the motor, longer run time.

BTW, welcome to TCX!!

作者: RcMagician 時間: 2011-6-9 13:38
唔該ching，咁即係話如果我想部車快啲，換粒36t都無問題啦。

作者: nghoming 時間: 2011-6-12 14:22
本帖最後由 nghoming 於 2011-6-12 14:24 編輯

回復 ahho 的帖子
c hing , where can i buy this ?

登錄/註冊後可看大圖

211251jcxfypycdadijdlz.jpg (198.79 KB, 下載次數: 12)

下載附件

2011-6-12 14:23 上傳

作者: ernestf 時間: 2011-6-12 18:15
Installed Exotek chassis for TCX, will test run in next couple of weeks.
http://ernrc.blogspot.com/2011/06/tcx-with-exotek-chassis.html

作者: nghoming 時間: 2011-6-12 19:32
回復 ernestf 的帖子

how much is this ar c hing ??
thx

作者: ernestf 時間: 2011-6-13 20:53
本帖最後由 ernestf 於 2011-6-13 20:56 編輯

回復 nghoming 的帖子

Sent you PM.

作者: nghoming 時間: 2011-6-14 01:44
回復 ernestf 的帖子

ok, thx very much !!

作者: ahho 時間: 2011-6-14 02:59

nghoming 發表於 2011-6-12 14:22

登錄/註冊後可看大圖

回復 ahho 的帖子
c hing , where can i buy this ?

http://www.roche.hk/shopping/ind ... &product_id=444

作者: GigaRacer 時間: 2011-6-21 01:11
本帖最後由 GigaRacer 於 2011-6-20 09:12 編輯

只是想和大家分享
終於有機會試真我的TCX
好好跑!!
又定又轉, 感覺比T3 Exotek 好

作者: nghoming 時間: 2011-6-21 05:42
回復 GigaRacer 的帖子

c hing
can you share your setting ar ?
thx

作者: GigaRacer 時間: 2011-6-21 11:10
            Front  / Rear:
arm block: 2.5 / 3.0
spring: pink / silver
shock oil: 35 / 35
downstop: 5 / 4
height:  5 / 5.5
camber: -1.5 / -1.5
toe: out 1 / in 3
roll bar: 1.4  / 1.2
upper damper mount: middle / 2nd hole from inside
front Roche spool + Top bones (the only option in car)
rear ball diff

作者: nghoming 時間: 2011-6-21 20:47
回復 GigaRacer 的帖子

spring: pink 係咪原裝果條呀？
唔該師兄

作者: GigaRacer 時間: 2011-6-21 23:59
回復 nghoming 的帖子

HPI Pink spring

作者: nghoming 時間: 2011-6-22 00:13
thx c hing

作者: GigaRacer 時間: 2011-7-27 00:31
Any TCX C hing changed to Exotek chassis? Any good?

作者: ernestf 時間: 2011-7-27 23:22
It is much narrower than the standard chassis. Look sexy ;)
Yet to test drive yet.
http://ernrc.blogspot.com/2011/06/tcx-with-exotek-chassis.html

作者: powis 時間: 2011-7-28 00:04
Can the orginal plastic battery tray can put into the Exotek chassis ?

作者: babybert 時間: 2011-9-14 10:56
Any CHing installed the narrow main chassis? Can the original battery holder fit it?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)