RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: CRC LE [打印本頁]

作者: hknewton 時間: 2011-2-1 23:59
標題: CRC LE
Get it today, yeah!!

作者: raymomo 時間: 2011-2-2 00:09
回復 1# hknewton

good good good! build up ASAP la ching!!

作者: 威威 時間: 2011-2-2 00:52
我都係今日取車，現在已經做緊水晶邊，不過呢架車都幾低，15xx,但係有成十件碳板。

作者: abcde 時間: 2011-2-2 00:56

我都係今日取車，現在已經做緊水晶邊，不過呢架車都幾低，15xx,但係有成十件碳板。
威威發表於 2011-2-2 00:52

登錄/註冊後可看大圖

留意車頭bumper位....見ching ray 爛過....如果做到補強會好一點...

作者: mikuro 時間: 2011-2-2 00:56
我都攞左車, see you guys in JV soon ^^

作者: 威威 時間: 2011-2-2 01:04
回復 4# abcde

Thx偉哥，係咪加番舊海綿泵把？

作者: JohnnyC 時間: 2011-2-2 01:04
回復 5# mikuro

wow...so many CRC at the same time!!! see you all soon at JV with my X10

作者: hknewton 時間: 2011-2-2 01:05
想買海棉bumper都買唔到，

作者: mikuro 時間: 2011-2-2 01:06

想買海棉bumper都買唔到，
hknewton 發表於 2011-2-2 01:05

登錄/註冊後可看大圖

X2. I also ask them to stock them as well >_<

作者: abcde 時間: 2011-2-2 01:09

回復 abcde

Thx偉哥，係咪加番舊海綿泵把？
威威發表於 2011-2-2 01:04

登錄/註冊後可看大圖

可參考蛇師兄做法...我諗可減少破爛度....
http://bbs.rc-evo.com/viewthread ... age%3D1&page=12

作者: mikuro 時間: 2011-2-2 01:13

回復 mikuro

wow...so many CRC at the same time!!! see you all soon at JV with my X10
JohnnyC 發表於 2011-2-2 01:04

登錄/註冊後可看大圖

Hi Johnny, will you come on coming SAT ^^

作者: JohnnyC 時間: 2011-2-2 01:22
回復 11# mikuro

normally we frds will go JV Sat evening..... lets see if we can have party!! hehe.

作者: raymomo 時間: 2011-2-2 01:25
回復 4# abcde

i bought a new chassis today!!

作者: raymomo 時間: 2011-2-2 01:26
回復 12# JohnnyC

wei go sat afternoon lor! ho ng ho?

作者: JohnnyC 時間: 2011-2-2 01:38
回復 14# raymomo

I'm ok....let see BM can go or not...and I need to check with Ho..

作者: JohnnyC 時間: 2011-2-2 01:39
回復 13# raymomo

Corally have stock la meh?

作者: raymomo 時間: 2011-2-2 01:42
回復 16# JohnnyC

on the way coming

作者: mikuro 時間: 2011-2-2 01:44

回復 abcde

i bought a new chassis today!!
raymomo 發表於 2011-2-2 01:25

登錄/註冊後可看大圖

Which one? for CRC LE

作者: kkchung 時間: 2011-2-2 01:45
剛也初步裝完。

[attach]460513[/attach]

作者: raymomo 時間: 2011-2-2 01:45
回復 18# mikuro

yes!

作者: raymomo 時間: 2011-2-2 01:48
回復 6# 威威

already add bumper ! but don't know why still broken, never have big crash!!

作者: raymomo 時間: 2011-2-2 02:04
回復 19# kkchung

wow ching 235 kit, when will u test ur car?

作者: JohnnyC 時間: 2011-2-2 02:09
回復 19# kkchung

nice 235 version!!

作者: 蛇打七吋 時間: 2011-2-2 11:00
有冇大哥買多左kingpin!求下你攞返出呢！幫下呢個跛腳LE!零部件供應緊張！

作者: mikuro 時間: 2011-2-2 11:21

有冇大哥買多左kingpin!求下你攞返出呢！幫下呢個跛腳LE!零部件供應緊張！
蛇打七吋發表於 2011-2-2 11:00

登錄/註冊後可看大圖

Ching, 我尋晚去 catshop 都好似唔見
你有冇同佢訂?

作者: 蛇打七吋 時間: 2011-2-2 11:29
訂左！不過無返貨！

作者: hknewton 時間: 2011-2-2 12:24
I find that there is a recall of crc kingpin
One lot of kingpin can't pass the test
Pls check crc website

作者: ericlocm 時間: 2011-2-2 12:56
[attach]460659[/attach][attach]460660[/attach][attach]460658[/attach]

小弟都低唔住誘惑入左手.因本身未玩過pan car.有d問題想請教各ching
1)用唔用到9451 servo ?
2)車頭pumper改海綿.是否買返黎自己裁.還是有FIT SIZE買?
3)有咩 OPTION件.係必改呢 ?
4)如大減牙改48P.有咩品牌合裝 ?
5)D海綿軑.新用要唔要磨磨佢先 ?
6)油壓油用幾多度 ? (TRC玩)

作者: raymomo 時間: 2011-2-2 15:48
本帖最後由 raymomo 於 2011-2-2 16:26 編輯

回復 28# ericlocm

1 用唔到 2 有原庄的 3 4mm rear top plate 4 任何48都可 5不用磨、直接揸呔水就飛得。6原庄就可以

作者: raymomo 時間: 2011-2-2 16:27
回復 26# 蛇打七吋

pm me your phone no la!!haha

作者: hknewton 時間: 2011-2-2 17:08
Check your kingpin!

http://www.teamcrc.com/crc/modul ... article&sid=132

作者: 蛇打七吋 時間: 2011-2-3 02:11
回復 31# hknewton

點解會咁嫁！已欠下一身kingpin數！！點還？！！！

作者: hknewton 時間: 2011-2-4 11:39
各位crc車主，有冇睇過條 kingpin 係唔係有問題果lot貨?

作者: mikuro 時間: 2011-2-9 00:32

Check your kingpin!
hknewton 發表於 2011-2-2 17:08

登錄/註冊後可看大圖

Have checked and my one looks like the new kingpin.

作者: hknewton 時間: 2011-2-9 12:45
回復 34# mikuro

My Kingpin seems to be the old version.

Ching, does your CRC come with Servo Safer?

作者: mikuro 時間: 2011-2-9 13:26
本帖最後由 mikuro 於 2011-2-9 15:03 編輯

回復 mikuro

My Kingpin seems to be the old version.

Ching, does your CRC come with Servo Saf ...
hknewton 發表於 2011-2-9 12:45

登錄/註冊後可看大圖

No, it doesn't. It would be in our own cost >_<
However, Xray XII link goes with servo saver so does the X10 link. ^^

作者: mikuro 時間: 2011-2-9 13:28

回復 mikuro

My Kingpin seems to be the old version.

Ching, does your CRC come with Servo Saf ...
hknewton 發表於 2011-2-9 12:45

登錄/註冊後可看大圖

If so, you may need to ask Cat Shop for the replacement.

作者: 1524 時間: 2011-2-9 14:05

回復 mikuro

My Kingpin seems to be the old version.

Ching, does your CRC come with Servo Saf ...
hknewton 發表於 2011-2-9 12:45

登錄/註冊後可看大圖

印象中...CRC個盒好似寫住唔跟servo saver 的
(不過唔太肯定)

作者: mikuro 時間: 2011-2-9 14:16

印象中...CRC個盒好似寫住唔跟servo saver 的
(不過唔太肯定)
1524 發表於 2011-2-9 14:05

登錄/註冊後可看大圖

有冇都要買番隻 ^^

作者: mikuro 時間: 2011-2-10 11:36

回復 mikuro

My Kingpin seems to be the old version.

Ching, does your CRC come with Servo Saf ...
hknewton 發表於 2011-2-9 12:45

登錄/註冊後可看大圖

Btw, can you post the picture of your kingpin?
I though your one is the same batch as mine.

作者: IS520 時間: 2011-2-11 17:55
Hi, mikuro ching,

If i buy this CRC LE at 2Feb2011 at Cat Shop, is it the same batch with you?
I want to know the kingpin is belonging to "which version"?

Btw, can you post the picture of your kingpin?
I though your one is the same batch as mine.
mikuro 發表於 2011-2-10 11:36

登錄/註冊後可看大圖

作者: hknewton 時間: 2011-2-11 22:17
回復 40# mikuro

See my king pin. I believed it is the 1st version -  Fully chromed one, hope it is not the silver one (soft king pin).

My stupid iphone can't focus the king pin.
作者: hknewton 時間: 2011-2-11 22:37
本帖最後由 hknewton 於 2011-2-11 22:39 編輯

Physic lesson

Take a photo behind a bottle of water.
Object will look bigger.
作者: raymomo 時間: 2011-2-11 23:07
回復 43# hknewton

Good take and it is not the soft one! Don't worry !
作者: mikuro 時間: 2011-2-13 01:14
本帖最後由 mikuro 於 2011-2-13 01:15 編輯

回復  mikuro

See my king pin. I believed it is the 1st version -  Fully chromed one, hope it is  ...
hknewton 發表於 2011-2-11 22:17

登錄/註冊後可看大圖

How about the colour of the thread? Is it darker than the chrome body?
If so, did you check with Cat shop for replacment?
作者: hknewton 時間: 2011-2-13 02:23
I think my one is type one.
In the crc photos, there is a lighting at the background. So the thread will become more shiny.
When you check the shaft, the soft king pin is not really shiny.
作者: raymomo 時間: 2011-2-13 02:34
回復 46# hknewton

其實如果大家買嘅係第二水貨就應該無問題、第一水就危險d!
作者: hknewton 時間: 2011-2-13 02:38
回復 47# raymomo

I buy on 2 Feb (2nd shipment)
But not sure why my king pin is not different from ching.
作者: raymomo 時間: 2011-2-13 02:59
回復 48# hknewton

Dunno why and just can say u r lucky! And one more tips for all CRC Ching the problem king pin r really easy broken , dun try to play it frist until u can change or buy another !
作者: 威威 時間: 2011-2-13 15:30
我與朋友昨天在trc試車我就爆頭尾啤鈴及掃左三隻大減齒，我朋友就掃兩隻大減齒，點解咁易掃大減齒？我現在可能要改48pitch大減齒。
作者: hknewton 時間: 2011-2-13 15:35
回復 50# 威威

炒車得好勁 or 炒上左壆, 所以掃大減?
作者: raymomo 時間: 2011-2-13 16:01
回復 50# 威威

如果係低T motor 唔知點解就一定會掃、可能動力太大、換48pitch就可解決但就孌左加速上無咁細膩不果唔使咁煩成日換齒、啤呤亦係比較弱的一環但應該未至於一次就ko,要下啤呤油記得！
作者: hknewton 時間: 2011-2-13 16:12
回復 52# raymomo

條唔係條尾太琳, 一加速條尾就落地
如果二樓板升高左, 條尾會唔會琳左??
作者: raymomo 時間: 2011-2-13 16:23
回復 53# hknewton

因要就2s lipo都無計、但就要個damper扭多少少 for減底當你加速時成個尾向下壓嘅角度盡量唔好店地、就算店都係side link個兩粒鏍絲、所以有時當直路加速時會見到火花！
作者: hknewton 時間: 2011-2-13 17:20
回復 54# raymomo

換硬d彈弓得唔得?
作者: raymomo 時間: 2011-2-13 17:58
回復 55# hknewton

扭緊d 或換彈弓都得
作者: 威威 時間: 2011-2-13 18:59
回復 51# hknewton

冇炒過行5-6個圈一盡雞就掃。
作者: 威威 時間: 2011-2-13 19:07
回復 52# raymomo

首先唔該師兄回答我的問題；我用5.0摩打，所以我都覺得動力太大所以掃齒，我會更換48pitch.我d啤呤全部有落油，新車順到扑街，落地就扑哂街，現在要換哂d啤呤去。
作者: raymomo 時間: 2011-2-13 19:42
回復 58# 威威

要留意尾軸兩面hub位都要留大概0.2mm到空位比佢走唔係好易壓死粒bearing!
作者: hknewton 時間: 2011-2-13 20:47
回復 59# raymomo

睇睇可唔可以幫到你:

http://www.teamcrc.com/crc/modul ... =article&sid=55
作者: ken6159 時間: 2011-2-13 21:42

我與朋友昨天在trc試車我就爆頭尾啤鈴及掃左三隻大減齒，我朋友就掃兩隻大減齒，點解咁易掃大減齒？我現在可 ...
威威發表於 2011-2-13 15:30

登錄/註冊後可看大圖

試下用大一d的膠齒, 如64pth 100t, 及用黑色做的膠呀, 應該可解决你的問題.
當然用48pitch 最好, 但最好用黑色制的
作者: 威威 時間: 2011-2-13 23:02
回復 59# raymomo

Ok thx!
作者: 威威 時間: 2011-2-13 23:03
回復 60# hknewton Thx!
作者: 威威 時間: 2011-2-13 23:05
回復 61# ken6159

師兄我都試過112t都一樣掃,點都好thx曬！
作者: benz1850 時間: 2011-2-17 23:07
may be the gear box deformed after you crash.  My CRC experience the same before, even using 48pitch
作者: ken6159 時間: 2011-2-17 23:57

回復  ken6159

師兄我都試過112t都一樣掃,點都好thx曬！
威威發表於 2011-2-13 23:05

登錄/註冊後可看大圖

What brand of your gear?
作者: 威威 時間: 2011-2-18 00:20
當然係64pitch。
作者: hk_sdu 時間: 2011-2-18 13:33

What brand of your gear?
ken6159 發表於 2011-2-17 23:57

登錄/註冊後可看大圖

Let me answer for 威威, he has tried, 64 pitch spur gear from TOP, Xeron, Kawada.
It is a problem of gear box or some design.

I push a 4.0 motor on F103 with 64 pitch, still can last for very long time. And of course rocket speed at GP track.
作者: ken6159 時間: 2011-2-18 22:45
本帖最後由 ken6159 於 2011-2-18 22:55 編輯

Let me answer for 威威, he has tried, 64 pitch spur gear from TOP, Xeron, Kawada.
It is a probl ...
hk_sdu 發表於 2011-2-18 13:33

登錄/註冊後可看大圖

Oh..... that may be some thing wrong on the motor mount etc.
I use the gear from KP of US
作者: hk_sdu 時間: 2011-2-18 23:05
Yours are not CRC!? The problem seems to appear on CRC Pro10
作者: ken6159 時間: 2011-2-18 23:26

Yours are not CRC!? The problem seems to appear on CRC Pro10
hk_sdu 發表於 2011-2-18 23:05

登錄/註冊後可看大圖

It was not, I suffered  the same issue on my 96T. But the issue has been solved after applying 100t 64 pitch or 78t 48pitch
作者: hk_sdu 時間: 2011-2-19 00:52
Thanks Ken, may be the bigger spur the better
作者: 威威 時間: 2011-2-21 10:41
我想問下crc pro ten 頭轆個粒六角保母絲母係咩尺寸？因我想一枝nut 批thx!
作者: mikuro 時間: 2011-2-21 11:12
本帖最後由 mikuro 於 2011-2-22 00:35 編輯

我想問下crc pro ten 頭轆個粒六角保母絲母係咩尺寸？因我想一枝nut 批thx!
威威發表於 2011-2-21 10:41

登錄/註冊後可看大圖

For most nuts, it is 3/16".
I have brought one from 五金鋪 and you can tell them for a 5 號 socket driver (9 號 for the nylon diff nut)
作者: 威威 時間: 2011-2-21 11:39
回復 74# mikuro

唔該曬師兄！
作者: mikuro 時間: 2011-2-21 11:43

回復  mikuro

唔該曬師兄！
威威發表於 2011-2-21 11:39

登錄/註冊後可看大圖

You are welcome ^^
作者: winclearly 時間: 2011-2-21 13:15
回復 67# 威威

ching, 請問你轉用48齒後,有冇再掃牙,我可能周4入trc試車
作者: 威威 時間: 2011-2-21 23:34
回復 77# winclearly

我暫時未裝48pitch，不過我朋友試左了，再冇掃齒了，不過珠差溶左一樣要換大減齒。
作者: winclearly 時間: 2011-2-22 02:34
回復 78# 威威

珠差溶?overheat?
作者: rk2 時間: 2011-2-22 11:40

剛也初步裝完。
kkchung 發表於 2011-2-2 01:45

登錄/註冊後可看大圖

條呔有 80 年代雙星的三文治 FEEL.
作者: ericlocm 時間: 2011-2-22 13:49
回復 79# winclearly

小弟就係溶左大減齒個ching(威威個fd),我已換左48p.掃齒問題已解決 !
但珠差運行時over heat.可能珠差太鬆! 今晚會試下收緊d行下........

小弟想問 ? 坊間可買到既大減 ( xenon/ kawada)只可比我放到8粒珠
而crc原裝係放12粒....會唔會係呢個問題令佢over heat呢 !!! (我已買大減買到窮)

remark ! 車用teampower 5T + 齒比 3.5.
作者: winclearly 時間: 2011-2-22 16:36
回復 81# ericlocm

ching,我周4或周日會去trc試車,8粒同12粒問題應該不大,周4會去trc試嗎?
作者: ericlocm 時間: 2011-2-23 14:16
Winclearly  兄......我昨晚rebuild珠差時發現d珠唔係圓形,所以末能試車，希望能聽到你的精神報告
作者: hknewton 時間: 2011-2-23 22:45
CRC 好似好病下
作者: ken6159 時間: 2011-2-23 23:28

CRC 好似好病下
hknewton 發表於 2011-2-23 22:45

登錄/註冊後可看大圖

作者: hknewton 時間: 2011-3-27 22:19
上星期係同一個小時內燒左兩隻64pitch大減，玩到火都離，
好彩有friend借左隻48pitch大減齒比我試，成架車精神晒
原因係CRC SET尾軸高底個adapter虛位好大，攪到pinion與大減齒不平衡，行到鈄晒，最後大減齒溶左
64pitch大減齒要對得好正個pinion，如果唔係就好易溶齒
尋日我換左48pitch大減齒＋尾軸高底個adapter後，玩得好開心
CRC 終於退燒
作者: mikuro 時間: 2011-3-28 10:25

上星期係同一個小時內燒左兩隻64pitch大減，玩到火都離，
好彩有friend借左隻48pitch大減齒比我試，成架車 ...
hknewton 發表於 2011-3-27 22:19

登錄/註冊後可看大圖

That's great ! Thanks for sharing ^^
作者: evojacky 時間: 2011-4-6 20:02
1500低wo
作者: benz1850 時間: 2011-4-6 20:59
Top's 大減齒 user 12 balls...worth to try.....
作者: joesheng 時間: 2011-4-12 21:32
標題: =_="
本帖最後由 joesheng 於 2011-4-17 17:55 編輯

唔用12son servo都裝唔倒正中位...
[attach]485994[/attach]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2