RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: HW 1S + 4.5T + IP 40C or SMC 50C=> use which firmware for turbo? [打印本頁]

作者: 3rock3rock 時間: 2011-2-12 23:40
標題: HW 1S + 4.5T + IP 40C or SMC 50C=> use which firmware for turbo?
本帖最後由 3rock3rock 於 2011-2-12 23:42 編輯

I want to use turbo.
Use V3.0 mod or
Use V3.0 stock?
Please advise and share you setting

作者: freeboy303 時間: 2011-2-12 23:44
回復 1# 3rock3rock

modify^^

作者: raymomo 時間: 2011-2-13 00:09
回復 1# 3rock3rock

New weapon? For 12son?

作者: 3rock3rock 時間: 2011-2-13 00:19
Ray, just want to get rid of the receiver battery.
But I have some difficulties in the parameter setting.
Today, I test the latest firmware for modify motor (V3.0 XXXX mod) but, in sometime, there is almost no power output.
Any CHing can give me some hints of what is happening, my gear ratio is 25/100 @ 4.5T?

作者: raymomo 時間: 2011-2-13 02:16
回復 4# 3rock3rock

Have you try to use V3.0 modify mode or change the gear ratio to 22/88 ! Is it something wrong of ur ESC?

作者: 3rock3rock 時間: 2011-2-13 06:08
本帖最後由 3rock3rock 於 2011-2-13 15:29 編輯

Some Ching suggest me to use the V2.0xxxx 528 mod instead of the latest SW
I will try it next week
Thx all CHing' s advice

作者: 3rock3rock 時間: 2011-3-5 20:17
latest testing result
ESC firmware: 528 mod
And turn off the lipo voltage protection

作者: QSO 時間: 2011-3-7 18:02

latest testing result
ESC firmware: 528 mod
And turn off the lipo voltage protection
3rock3rock 發表於 2011-3-5 20:17

登錄/註冊後可看大圖

now ok ma?

作者: 3rock3rock 時間: 2011-3-7 22:07
I think it is normal now

作者: JohnnyC 時間: 2011-3-10 14:23
回復 9# 3rock3rock

Hi 3rock C hing, I tried your suggestion last night at JV with my HW 1S, it now noramlly can run for about 9-10 mins, so great! thanks a lot for your help!

作者: 3rock3rock 時間: 2011-3-10 21:54

回復 3rock3rock

Hi 3rock C hing, I tried your suggestion last night at JV with my HW 1S, ...
JohnnyC 發表於 2011-3-10 14:23

登錄/註冊後可看大圖

You are welcome

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)