RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Xray XII pinion choice in JV? [打印本頁]

作者: Edwin 時間: 2011-3-16 14:17
標題: Xray XII pinion choice in JV?
I would like to ask what pinion gear for JV with 5.5T motor? Xray XII come with 96 spur gear. Thank's a lot!!

作者: billlkyy 時間: 2011-3-16 16:01
要睇吓條呔幾厚架，我4.0 r 48mm 就行24

作者: pcm118 時間: 2011-3-16 16:08
you can start with 24 and go up if you want more straight line speed

作者: Edwin 時間: 2011-3-17 01:18
Thank you for both C Hing's advise. Would acceleration be very slow when exit slow corner with 24 or higher?

作者: mikuro 時間: 2011-3-17 09:23
本帖最後由 mikuro 於 2011-3-17 09:28 編輯

Thank you for both C Hing's advise. Would acceleration be very slow when exit slow corner with 24 or ...
Edwin 發表於 2011-3-17 01:18

登錄/註冊後可看大圖

Hi Edwin, I have no problem using 22/96 or 24/96 with 4T during cornering.
Suggest you should try in the track first ^^

作者: pcm118 時間: 2011-3-17 09:37

Thank you for both C Hing's advise. Would acceleration be very slow when exit slow corner with 24 or ...
Edwin 發表於 2011-3-17 01:18

登錄/註冊後可看大圖

JV is a big track for 1/12 so I prefer higher top end speed. But it depends on your driving style so you need to try.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)