logo.jpg (2.29 KB, 下載次數: 3)
2011-3-16 17:41 上傳
4536 Update - SAL-HLG Glider.jpg (8.57 KB, 下載次數: 3)
2011-3-16 17:41 上傳
Product information:
WP UPDATE Graupner 4536 The UPDATE is a thoroughbred SAL-HLG(side-arm-launching hand-launch glider). At the design stage we were anxiousthat this model should satisfy the special requirements which are made on thenew generation of HLGs. The latest HLGs are no longer simply hurled upwardslike a javelin, but launched discus-style, using a rotary movement. This newmethod of launching gives greater launch height and therefore longer flighttimes. UPDATE can be launched equally well by right-handed and left-handedmodellers. On a flat field the model can either be hand-launched using the SALtechnique, or brought up to gliding height by a bungee or winch. Micro-Powerservos are required for rudder, elevator and both ailerons, and the controlsystem requires a suitable mixer at the transmitter. The GRP/CFRP fuselage,GRP/CFRP wing and machined tail panels ensure that the model can be assembledquickly.
Clear assembly instructions in German, English and French, including stagephotos and notes on the side arm launching method, GRP / CFRP fuselage nosepod, tail boom, tail mount, GRP/CFRP wing, GRP canopy, machined tailplane andfin, covering film, towhook, CFRP SAL-launching peg, linkage hardware pack.
Rudder
Elevator
Ailerons
Wingspan approx. 1500 mm
Overall length approx. 1088 mm
Wing section 1125 mm
Wing area approx. HQ/W 2.0/7.5
Tailplane area approx. 21 dm2
Total surface area approx. 2.6 dm2
All-up weight approx. 23.6 dm2
Total surface area loading approx. 320 g
作者: airyu 時間: 2011-3-16 21:54
please pm price thx
作者: jethobby 時間: 2011-3-16 22:04
Please check PM.
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |