RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Charger Problem [打印本頁]

作者: inch123456 時間: 2011-4-28 22:41
標題: Charger Problem
本帖最後由 inch123456 於 2011-4-28 22:48 編輯

How long should I charge for the battery of Tamiya 7.2v-1300mAH by using Winstar NC-789

follow the charger?

https://picasaweb.google.com/inch649/M05?authkey=Gv1sRgCK2W8rKVi6r8vAE#5600651127310063874

https://picasaweb.google.com/inch649/M05?authkey=Gv1sRgCK2W8rKVi6r8vAE#5600651118477463602

作者: TigerI2010 時間: 2011-5-8 15:56
回復 inch123456 的帖子

This charger seems having only 2 charging mode, fast and standard.
See the instruction on the charger, charging time is depending on your choice.

作者: inch123456 時間: 2011-5-8 16:12
本帖最後由 inch123456 於 2011-5-8 16:12 編輯

回復 TigerI2010 的帖子

Thanks.....but for this charger...no manual.....too bad

作者: TigerI2010 時間: 2011-5-8 16:47
回復 inch123456 的帖子

I have same brand name charger but with current adjustment from 1.3AH to 3.0AH.
After using LiPo, it is no use now.

作者: inch123456 時間: 2011-5-8 19:59
本帖最後由 inch123456 於 2011-5-8 19:59 編輯

回復 TigerI2010 的帖子

oic...so how long would you suggest for charging.....like fast or slow...for 1300MAH and 3000

thanks

作者: TigerI2010 時間: 2011-5-8 20:17
Simple rule
1. Slow is better than fast.
2. Depending on the battery capacity and its performance. Suggests using 1C for charging.
C=battery capacity, eg your battery 1300mAH using 1300mAH; 3000mAH using 3000mAH

作者: inch123456 時間: 2011-5-8 22:58
回復 TigerI2010 的帖子

2. Depending on the battery capacity and its performance. Suggests using 1C for charging.
C=battery capacity, eg your battery 1300mAH using 1300mAH; 3000mAH using 3000mAH

??? any example??

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)