RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區
標題: Salute ! [打印本頁]
作者: malosun 時間: 2011-5-17 08:22
標題: Salute !
本帖最後由 malosun 於 2011-5-17 08:23 編輯
廿多年前,小弟為大約小4或5小學生一名,買左第一部搖控車,乃双星蚊車法拉利Testarossa。當時有個有錢同學話又想買搖控車玩,我就倍佢同佢老母去左荃灣興記買左部Salute(藍盒),跟住仲上埋佢屋企幫佢砌埋,玩左一排,條友移埋民,跟住我都無玩搖控車好耐。後來斷斷續續玩吓停吓咁十九幾年,依家只買不玩,連砌都無時間。
早排係2手版見hihizaza兄放架Optima Mid好抵吓,話左買但後來無買(sorry again),但撩起左條根,想買番架常年既情意結 ---- Salute。跟住一番網上搜尋,click吓click吓,洗左皮幾野,買左呢堆嘢番嚟,自我安慰滿足一番。
可惜呢盒Salute唔係藍盒,唔係就perfect,不過買舊嘢好講緣份,我見呢盒價錢OK所以買左佢,不過基本上只要肯比錢,差不多每個型號既Optima既 new in box 都仲可買到,但我未有心理準備兼財力儲齊,亦無咁多位收藏。
依家NIB攞嚟砌好似好浪費,所以剛買左架2手Optima,打算翻新加理我堆新parts做吓display,不過真係唔知有無時間搞,隨緣。
作者: wave 時間: 2011-5-17 08:34
本帖最後由 wave 於 2011-5-17 08:36 編輯
恭喜!恭喜!
盒NIB 都好新下wor.
小心一發不可收拾wor......![](static/image/smiley/default/titter.gif)
作者: mcb 時間: 2011-5-17 08:34
nice car
作者: RCK 時間: 2011-5-17 08:43
optima shell where to buy?
作者: hihizaza 時間: 2011-5-17 09:11
唔買無問題,最大鑊係自己整靚左之後唔捨得再賣,屋企又多一架車仔。
另外,中東repro套optima呔水準得唔得呀?如果出理OT66就好喇!
作者: mandymiu 時間: 2011-5-17 09:13
流口水中...
作者: malosun 時間: 2011-5-17 09:23
hihizaza 發表於 2011-5-17 09:11
唔買無問題,最大鑊係自己整靚左之後唔捨得再賣,屋企又多一架車仔。
另外,中東repro套optima呔水準得唔得 ...
OT66 就出
http://theoptimahouse.blogspot.c ... pros-are-there.html
作者: chan1234 時間: 2011-5-17 09:24
very nice !!!!
作者: racart 時間: 2011-5-17 11:21
師兄係唔係呢個花
作者: hihizaza 時間: 2011-5-17 11:37
回復 racart 的帖子
大佬!做乜你個殼咁靚架?自己噴?遲啲幫我整個!
作者: nwm 時間: 2011-5-17 11:52
嘩,毒到發紫呀![](static/image/smiley/grapeman/10.gif)
作者: RCK 時間: 2011-5-17 12:00
what is oT66?
作者: tarotrex 時間: 2011-5-17 12:26
回復 hihizaza 的帖子
Where to find the stickers?
作者: smallwhite1234 時間: 2011-5-17 12:38
哇~~正爆~~~
作者: ilove-benz 時間: 2011-5-17 14:04
沙律....果陣細個流口水但無水
作者: malosun 時間: 2011-5-17 14:28
racart 發表於 2011-5-17 11:21
師兄係唔係呢個花
無錯,正是!
作者: emaxxyeung 時間: 2011-5-17 14:55
回復 malosun 的帖子
正,very good item.(NIB)
本人對NIB呢家嘢有D保留,因買回來吾舎得砌,總係覺得有的吾開心,
總係覺得未玩過,未搞過,感情會少D,
純個人意見,勿插,
Thx,
我都 等待緊第一部戰馬turbo optima出現。
作者: emaxxyeung 時間: 2011-5-17 14:57
racart 發表於 2011-5-17 11:21
師兄係唔係呢個花
Wo wo wo, 勁正
作者: malosun 時間: 2011-5-17 16:02
emaxxyeung 發表於 2011-5-17 14:55
回復 malosun 的帖子
正,very good item.(NIB)
基本上,nib只係用來滿足購買慾同「草」野隱。
作者: Sin 時間: 2011-5-17 16:16
回復 mandymiu 的帖子
Good to know the re-pro for the OT-66 is ready
作者: Sin 時間: 2011-5-17 16:17
回復 hihizaza 的帖子
OT-66 new tyres for my car at last la
作者: wave 時間: 2011-5-17 16:19
細細個冇錢買淨係可以望住個盒,大個左當然更係想連個盒都擁有埋la......![](static/image/smiley/default/titter.gif)
冇辦法情意結黎![](static/image/smiley/default/lol.gif)
作者: malosun 時間: 2011-5-17 16:30
Sin 發表於 2011-5-17 16:17
回復 hihizaza 的帖子
OT-66 new tyres for my car at last la
How about group buy when it is available for sale to save shipping cost?
作者: JV西人 時間: 2011-5-17 16:54
真係要對樓主敬禮![](static/image/smiley/default/titter.gif)
佩服佩服
作者: racart 時間: 2011-5-17 17:13
回復 emaxxyeung 的帖子
TURBO OPTIMA GO GO GO![](static/image/smiley/default/victory.gif)
作者: emaxxyeung 時間: 2011-5-17 18:57
racart 發表於 2011-5-17 17:13
回復 emaxxyeung 的帖子
TURBO OPTIMA GO GO GO
Just wait the chance.
作者: racart 時間: 2011-5-17 22:27
回復 hihizaza 的帖子
揾朋友幫手![](static/image/smiley/default/handshake.gif)
作者: Dsikk 時間: 2011-5-17 23:42
NIB?上手都好忍得wor
作者: emaxxyeung 時間: 2011-5-18 19:40
racart 發表於 2011-5-17 22:27
回復 hihizaza 的帖子
揾朋友幫手
right. 一於揾朋友幫手.
作者: silvernet35 時間: 2011-5-19 00:33
Thank You !
作者: momo 時間: 2011-5-21 22:03
very nice
作者: malosun 時間: 2011-5-23 08:08
Repro parts in progress:
作者: malosun 時間: 2011-5-23 11:34
本帖最後由 malosun 於 2011-5-23 11:35 編輯
回復 malosun 的帖子
new arrival for restoration.....
作者: hihizaza 時間: 2011-5-23 11:45
回復 malosun 的帖子
for group buy OT66, pls leave me your phone no.,may be I will buy with other member!
作者: nel3838 時間: 2011-5-23 12:01
RCK 發表於 2011-5-17 12:00
what is oT66?
Optima series original tyres. But Kyosho dont make anymore, for NIB second hand ones are very expensive for collectors. But now someone from Kuwait is making repro copies, which is good news if one want to used the tyres. Although I only use other similar tyres to play. Just keep the original on shelves.... LOL ![](static/image/smiley/default/lol.gif)
作者: nel3838 時間: 2011-5-23 12:05
malosun 發表於 2011-5-17 08:22
廿多年前,小弟為大約小4或5小學生一名,買左第一部搖控車,乃双星蚊車法拉利Testarossa。當時有個有 ...
"不過基本上只要肯比錢,..... wahh very expensive wor....". On EBay, NIB Optimas go for > US$400...
Agree, I have a few but also all sitting in boxes, no time laaa C-Hing.... LOL....![](static/image/smiley/default/lol.gif)
Maybe we can go for a 老野团.... haha. ![](static/image/smiley/coolmonkey/03.gif)
作者: sniper 時間: 2011-5-23 12:22
hihizaza 發表於 2011-5-23 11:45
回復 malosun 的帖子
for group buy OT66, pls leave me your phone no.,may be I will buy with other me ...
會有其他optima parts 團購嗎
作者: malosun 時間: 2011-5-23 13:59
nel3838 發表於 2011-5-23 12:05
"不過基本上只要肯比錢,..... wahh very expensive wor....". On EBay, NIB Optimas go for > US$400.. ...
Ha! If you have NIB Optima for sale at US$400, I will take it with no doubt!
NIB Optima in ebay now all listed >US$1000!! (though maybe no one is buying..) a used one in good condition can bid up to US$400 now ar!
作者: tiger1 時間: 2011-5-23 14:55
呀, 毒發呀! 毒...毒...毒... die lah ![](static/image/smiley/default/smile.gif)
![](static/image/smiley/default/titter.gif)
![](static/image/smiley/default/tongue.gif)
作者: hihizaza 時間: 2011-5-23 15:07
本帖最後由 hihizaza 於 2011-5-23 15:08 編輯
malosun 發表於 2011-5-23 13:59
Ha! If you have NIB Optima for sale at US$400, I will take it with no doubt!
NIB Optima in eba ...
X2X2............![](static/image/smiley/default/sweat.gif)
ebay啲嘢都通漲!!!
作者: nel3838 時間: 2011-5-23 15:19
malosun 發表於 2011-5-23 13:59
Ha! If you have NIB Optima for sale at US$400, I will take it with no doubt!
NIB Optima in eba ...
wahhh, 十分通涨.... ![](static/image/smiley/default/cry.gif)
发达啦... ![](static/image/smiley/default/lol.gif)
作者: tiger1 時間: 2011-5-23 15:32
I think these optima/salutes are the best among Kyosho cars
![](static/image/smiley/default/victory.gif)
作者: wave 時間: 2011-5-23 15:48
malosun 發表於 2011-5-23 13:59
Ha! If you have NIB Optima for sale at US$400, I will take it with no doubt!
NIB Optima in eba ...
師兄小心越跌越深,不能自拔......![](static/image/smiley/default/lol.gif)
作者: malosun 時間: 2011-5-24 08:41
c-hings, can you tell me where can I get the "shock bush"? Thansk!
作者: racart 時間: 2011-5-24 09:34
應該係 ebay會有
作者: malosun 時間: 2011-5-24 09:52
racart 發表於 2011-5-24 09:34
應該係 ebay會有
No ar, I think it is included in the shock set. Any subsitution parts?
作者: malosun 時間: 2011-5-24 11:03
Today's arrival, 240SB.
作者: RCK 時間: 2011-5-24 23:45
i buy turbo optima shell
作者: hihizaza 時間: 2011-5-25 00:00
本帖最後由 hihizaza 於 2011-5-25 00:37 編輯
回復 malosun 的帖子
呢包有4粒(硬)膠shock collar,金油壓合用.
作者: LWING 時間: 2011-5-25 12:22
回復 malosun 的帖子
可以用油車油管頂替
作者: malosun 時間: 2011-5-30 15:35
Restoration in progress....
整容前 and 整容後
作者: wave 時間: 2011-5-30 15:46
本帖最後由 wave 於 2011-5-30 15:47 編輯
好得呀![](static/image/smiley/default/victory.gif)
作者: malosun 時間: 2011-5-30 15:58
自製金 Optima.....
new parts before and after....
作者: hihizaza 時間: 2011-5-30 16:09
waaaaaaaaa!!!!super![](static/image/smiley/default/shy.gif)
作者: tarotrex 時間: 2011-5-30 16:10
How do you make it and how much do you make it??![](static/image/smiley/default/shocked.gif)
作者: malosun 時間: 2011-5-30 16:12
tarotrex 發表於 2011-5-30 16:10
How do you make it and how much do you make it??
check pm.
作者: hihizaza 時間: 2011-5-30 19:10
回復 malosun 的帖子
How do you make it and how much do you make it??xxx2
作者: sniper 時間: 2011-5-30 19:48
How do you make it and how much do you make it??xxx3
作者: malosun 時間: 2011-5-31 08:24
The color quite match, almost the same!
作者: mcb 時間: 2011-5-31 08:37
How do you make it and how much do you make it??x4
作者: sniper 時間: 2011-5-31 09:02
malosun 發表於 2011-5-31 08:24
The color quite match, almost the same!
如果o的件有小小氧化,有無需要自行打磨拋光先再交付去電鍍呢??
作者: malosun 時間: 2011-5-31 09:06
sniper 發表於 2011-5-31 09:02
如果o的件有小小氧化,有無需要自行打磨拋光先再交付去電鍍呢??
I am not sure, but I think so, you may ask ask the guy. Anodize for alum. parts only wor.
作者: chowhungjai 時間: 2011-5-31 09:51
回復 malosun 的帖子
How do you make it and how much do you make it??xxx5, thanks
作者: hihizaza 時間: 2011-5-31 11:22
好多種金色都幾難選擇喎
作者: hihizaza 時間: 2011-5-31 11:23
阿蘇士金兜得唔得呢?
作者: malosun 時間: 2011-5-31 11:43
hihizaza 發表於 2011-5-31 11:23
阿蘇士金兜得唔得呢?
not sure ar, but alum only.
作者: malosun 時間: 2011-5-31 11:44
hihizaza 發表於 2011-5-31 11:22
好多種金色都幾難選擇喎
you better have a color sample yourself for his reference.
作者: tarotrex 時間: 2011-5-31 12:36
回復 hihizaza 的帖子
Let me know when you go !
作者: hihizaza 時間: 2011-5-31 12:39
回復 tarotrex 的帖子
Let me know when you go !
you 2!
作者: tarotrex 時間: 2011-5-31 13:03
一定![](static/image/smiley/default/handshake.gif)
作者: emaxxyeung 時間: 2011-5-31 22:39
如果D件有氧化,一定要打磨完再電會先完美‧
作者: toysman2002hk 時間: 2011-5-31 23:32
這些 NIB 小弟早年購自一位已歸隱之 RC 屆前輩的。謝謝 !
作者: emaxxyeung 時間: 2011-5-31 23:35
回復 toysman2002hk 的帖子
發達。
作者: malosun 時間: 2011-6-6 01:39
body update...
作者: malosun 時間: 2011-6-6 01:41
frame update.... can't fit the body in with the side guard! maybe I have to leave the side guard to other Optima....
作者: silvernet35 時間: 2011-6-6 22:09
回復 toysman2002hk 的帖子
這些 NIB 小弟早年購自一位已歸隱之 RC 屆前輩的。謝謝 !.................
How Much ?
作者: malosun 時間: 2011-6-7 11:37
Almost done.... 1 dogbone is missing, can any chings help?
作者: bei6266 時間: 2011-6-7 12:04
經典,![](static/image/smiley/default/biggrin.gif)
![](static/image/smiley/default/biggrin.gif)
![](static/image/smiley/default/biggrin.gif)
作者: slowerthanyou 時間: 2011-6-7 13:10
so nice!
作者: racart 時間: 2011-6-7 17:18
嘩好靚啊![](static/image/smiley/default/victory.gif)
作者: chan1234 時間: 2011-6-7 17:39
回復 malosun 的帖子
好靚
作者: sniper 時間: 2011-6-15 18:40
謝 malosun 師兄引路將鋁件交電鍍廠加工,老闆林先生真係非常好人,詳細講解電鍍過程,獲益良多
作者: malosun 時間: 2011-6-16 08:05
sniper 發表於 2011-6-15 18:40
謝 malosun 師兄引路將鋁件交電鍍廠加工,老闆林先生真係非常好人,詳細講解電鍍過程,獲益良多
what parts did you anodize?
作者: sniper 時間: 2011-6-16 08:09
malosun 發表於 2011-6-16 08:05
what parts did you anodize?
Whole set of optima "metal" parts![](static/image/smiley/default/biggrin.gif)
作者: malosun 時間: 2011-6-16 10:45
sniper 發表於 2011-6-16 08:09
Whole set of optima "metal" parts
Ha! Everyone can have a 老翻 optima now!
作者: sniper 時間: 2011-6-16 13:22
malosun 發表於 2011-6-16 10:45
Ha! Everyone can have a 老翻 optima now!
台仔o個部先係"老翻",o里部.......後期上色版啦!!![](static/image/smiley/default/lol.gif)
![](static/image/smiley/default/titter.gif)
作者: malosun 時間: 2011-6-16 14:32
sniper 發表於 2011-6-16 13:22
台仔o個部先係"老翻",o里部.......後期上色版啦!!
yeah, even for the "real" gold optima, it actually use the same parts and went through the same process as we do, so our "後期上色版" is actually the same as the real one la
!
I am now gathering another new set of metal parts for my next Turbo Optima or Salute project ar!
作者: sniper 時間: 2011-6-16 14:47
malosun 發表於 2011-6-16 14:32
yeah, even for the "real" gold optima, it actually use the same parts and went through the same pr ...
Wait for your next project. PM me if you order the shell from oversea<I need one or two shell>
作者: mcb 時間: 2011-6-17 08:47
malosun 發表於 2011-6-7 11:37
Almost done.... 1 dogbone is missing, can any chings help?
好靚啊
作者: malosun 時間: 2011-6-17 09:16
sniper 發表於 2011-6-16 14:47
Wait for your next project. PM me if you order the shell from oversea
ok, but maybe we should all wait for the new tires first...
作者: tunagt 時間: 2011-6-17 19:31
回復 malosun 的帖子
C Hing 可否pm電鍍廠地址給我? ......謝謝
作者: kamlo713 時間: 2011-6-17 19:49
真系一D都吾少野
作者: cwctsm 時間: 2011-6-18 13:39
nice car
作者: malosun 時間: 2011-6-20 08:41
Progress is slow, now making the driver and waiting for the new bumper...
作者: blueray 時間: 2011-6-20 09:44
如果正生都收戒呢D毒就好lur.
作者: malosun 時間: 2011-7-16 00:42
new bumper arrived.
作者: malosun 時間: 2011-7-16 00:44
bought a new set of metal parts and gear cover as well...
作者: malosun 時間: 2011-7-16 00:46
ar..... bought another NIB as well..... but it is a small one....
作者: rc-goods 時間: 2011-7-27 09:58
good wor c hing
歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) |
Powered by Discuz! X3.2 |