RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 玩DRIFT用頭牙差尾直,有冇問題呢?? [打印本頁]

作者: nikeid 時間: 2011-6-7 07:43
標題: 玩DRIFT用頭牙差尾直,有冇問題呢??
小弟架DRB用頭珠差尾直,想換BD5個牙差落車頭代替珠差,以減少維修
有冇師兄用呢個SETTING?? 各師兄可唔可以俾D意見我??
Thx !

作者: nikeid 時間: 2011-6-7 11:15
anyone can help ?

作者: fatchickterian 時間: 2011-6-7 11:43
It could work, but may have to use very thin diff oil like #500 and make sure it does not leak!!

作者: nikeid 時間: 2011-6-7 11:56

fatchickterian 發表於 2011-6-7 11:43

登錄/註冊後可看大圖

It could work, but may have to use very thin diff oil like #500 and make sure it does not leak!!

咁會唔會仲麻煩過用珠差??

作者: fatchickterian 時間: 2011-6-7 12:12

nikeid 發表於 2011-6-7 11:56

登錄/註冊後可看大圖

咁會唔會仲麻煩過用珠差??

Well, I'm not sure too, never try it before!! Sorry can't help!!

作者: nikeid 時間: 2011-6-7 12:37
本帖最後由 nikeid 於 2011-6-7 12:37 編輯

fatchickterian 發表於 2011-6-7 12:12

登錄/註冊後可看大圖

Well, I'm not sure too, never try it before!! Sorry can't help!!

C-hing , u also using 珠差 ??

作者: s.y.kwok 時間: 2011-6-7 22:20
buy why don't u use one-way for front ???

作者: nikeid 時間: 2011-6-8 05:02

s.y.kwok 發表於 2011-6-7 22:20

登錄/註冊後可看大圖

buy why don't u use one-way for front ???

one-way,我之前架tt-01都用,但架車總係好似好難控制,好易打白鴿轉

作者: fatchickterian 時間: 2011-6-8 08:41

nikeid 發表於 2011-6-7 12:37

登錄/註冊後可看大圖

C-hing , u also using 珠差 ??

Yes, I use ball diff in front and spool at the back.

I set my ball diff very loose, which I think, feels good!

Front one way is good too!!

作者: s.y.kwok 時間: 2011-6-8 11:54
回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

作者: nikeid 時間: 2011-6-8 12:19
本帖最後由 nikeid 於 2011-6-8 12:25 編輯

回復 s.y.kwok 的帖子

係呀！將會玩CS2.0, 咁我應點做，。？

作者: nikeid 時間: 2011-6-8 12:20
回復 fatchickterian 的帖子

sorry, wt is "spool" ??

作者: fatchickterian 時間: 2011-6-8 12:35

nikeid 發表於 2011-6-8 12:20

登錄/註冊後可看大圖

回復 fatchickterian 的帖子

sorry, wt is "spool" ??

Rear Spool = 尾直

作者: nikeid 時間: 2011-6-9 09:23

s.y.kwok 發表於 2011-6-8 11:54

登錄/註冊後可看大圖

回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

C-hing , here ma ??
如果我將會玩CS2.0, 咁我應點做，。？

作者: nikeid 時間: 2011-6-9 14:28

s.y.kwok 發表於 2011-6-8 11:54

登錄/註冊後可看大圖

回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

如果用左ONE-WAY,45.5MM的頭萬向洗唔洗換??

作者: s.y.kwok 時間: 2011-6-10 01:20
本帖最後由 s.y.kwok 於 2011-6-10 02:20 編輯

nikeid 發表於 2011-6-9 14:28

登錄/註冊後可看大圖

如果用左ONE-WAY,45.5MM的頭萬向洗唔洗換??

okay gei,is use 45.5mm

作者: nikeid 時間: 2011-6-10 09:58
thx a lot, c-hing

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)