RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請問依家邊隻Hyperion叉機最好用 [打印本頁]

作者: msfone7w 時間: 2011-7-29 21:59
標題: 請問依家邊隻Hyperion叉機最好用
及價錢？

作者: Allan007 時間: 2011-7-29 22:07
回復 msfone7w 的帖子

前日買左720 DUO3，很好用但很貴

作者: msfone7w 時間: 2011-7-29 22:08

Allan007 發表於 2011-7-29 22:07

登錄/註冊後可看大圖

回復 msfone7w 的帖子

前日買左720 DUO3，很好用但很貴

$1800？

作者: Allan007 時間: 2011-7-29 22:10
回復 msfone7w 的帖子

$1900

作者: rcracing 時間: 2011-7-29 22:42
買Mega-power啦,一樣功能,平幾百!!!

作者: msfone7w 時間: 2011-7-29 22:45
Hyperion 單叉果隻會平D嗎？

作者: raman9551 時間: 2011-7-29 22:54
回復 rcracing 的帖子

乜唔係B6又平又抵咩

作者: rcracing 時間: 2011-7-29 22:59

raman9551 發表於 2011-7-29 22:54

登錄/註冊後可看大圖

回復 rcracing 的帖子

乜唔係B6又平又抵咩

人地問H,megapower功能一樣但平幾百,呢d先係幫人,唔係好似你咁挑人!!

作者: raman9551 時間: 2011-7-29 23:02
回復 rcracing 的帖子

哦..............

作者: gimsink 時間: 2011-7-29 23:15
B6呢, 係平係抵, 但係差得好慢又唔準. Hyperion Duo3 充得又快又準, 公認最好, 但貴. Hyperion 單差平D, 但如果電多的話, 都係買孖差有着數. 有師兄用Mega Power孖差評價也很高, 應該都 OK.

作者: Noir.KAZE 時間: 2011-7-29 23:26
依家買一定係孖差
單差實在係好浪費時間

至於邊部好
都係睇你捨唔捨得俾錢既je

作者: rcracing 時間: 2011-7-29 23:32
最準最快最平買UNA6啦,6cells獨立差電!!

作者: william310 時間: 2011-7-29 23:44
Una6好易燒！

作者: gimsink 時間: 2011-7-29 23:55
有個成都朋友, 真係差機狂, 車就三四架電就三四十件差機就成二十架, 又B5 又B6 又B8 又UNA6 又Hyperion, 又Muchmore 又乜鬼鋰電保母, 我问佢 UNA6得唔得 ? 佢話抄他媽, 說你們在香港買的可能是出口版用得到.....

作者: Andrew168 時間: 2011-8-1 13:24
本帖最後由 Andrew168 於 2011-8-1 13:28 編輯

我用緊 una6 plus (黑色殼) 平,快,準,滿, 幾百元好過 b6 多多聲,
已前有 4 部 b6, 用左 una6 plus 之後, 即放走晒 4 部 b6

作者: peterkit888 時間: 2011-10-20 17:57
720i$1900,620i $1400

作者: du0449 時間: 2011-10-20 18:19

Allan007 發表於 2011-7-29 22:07

登錄/註冊後可看大圖

回復 msfone7w 的帖子

前日買左720 DUO3，很好用但很貴

very good

作者: 威威 時間: 2011-10-20 20:36
0720i duo 3+雙叉$1860，0615i super duo 3 雙叉$1680

作者: 威威 時間: 2011-10-20 20:38
以上全部機底有公司蓋印，有一年保養，有壞一部換一部，你話堅唔堅

作者: cardo 時間: 2011-10-21 22:28

Andrew168 發表於 2011-8-1 13:24

登錄/註冊後可看大圖

我用緊 una6 plus (黑色殼) 平,快,準,滿, 幾百元好過 b6 多多聲,
已前有 4 部 b6, 用左 una6 plus 之後, 即 ...

師兄,請問una6 plus (黑色殼)咩價錢? THX~~~~~

作者: andyccf2004 時間: 2011-10-30 07:56
本帖最後由 andyccf2004 於 2011-10-30 07:58 編輯

Allan007 發表於 2011-7-29 22:07

登錄/註冊後可看大圖

回復 msfone7w 的帖子

前日買左720 DUO3，很好用但很貴

May I know what is the spec of your power supply that you are connected to this charger ? 12V or 24V , how much current ?

作者: Allan007 時間: 2011-10-30 08:19
本帖最後由 Allan007 於 2011-10-30 14:04 編輯

andyccf2004 發表於 2011-10-30 07:56

登錄/註冊後可看大圖

May I know what is the spec of your power supply that you are connected to this charger ? 12V or 2 ...

I'm using a 12V 15A power supply, which is good enough to charge two 2S at 10A.

作者: andyccf2004 時間: 2011-10-30 13:42

Allan007 發表於 2011-10-30 08:19

登錄/註冊後可看大圖

I'm using a 12V 15A power supply, which good enough to charge two 2S at 10A.

Thanks Allan. I just bought the same charger yesterday, The sales guy recommended 30A power supply (I assumed he was saying 12V, as I didn't know this charger takes 24V supply when I asked him). I followed his recommendation and bought another power supply 12V 30A. When I came home and read the user manual, the recommended power supply is 24V+ 1300W+, which is a very large output. I was so worry, now heard about your experience, I felt more comfortable.

作者: Allan007 時間: 2011-10-30 14:02

andyccf2004 發表於 2011-10-30 13:42

登錄/註冊後可看大圖

Thanks Allan. I just bought the same charger yesterday, The sales guy recommended 30A power supply ...

If you don't have high-S batteries to charge at high amperage, you don't need a large power supply for this kind of energy efficient charger. For example, I only have 2S LiPo and even if I charge them at 10A, 8.4x10x2 is still < 12x15. So my 12V 15A power supply is good enough for my application although the charger can take a lot more.

One thing which might be worth sharing is that the USB port of the charger is very sensitive to the ripple content of the output of the power supply. Originally I was using a Muchmore power supply and my computer could never connect to the charger. After I changed to another power supply with a much lower ripple content, my computer can connect to the charger every time. So if you have problem with the USB connection, check your power supply

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)