RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: LRP 摩打問題?? [打印本頁]

作者: hinwong 時間: 2011-8-1 02:17
標題: LRP 摩打問題??
本帖最後由 hinwong 於 2011-8-1 02:18 編輯

今日不知不覺玩到108度,收車果刻未覺有事...
之後再著番, 問題就黎.
唔識行..推一推就行(唔覺特別慢),
DUP BREAK 有反應.
不過跟住又唔行,
再推又行....同埋冇左後波
所有線已經重新焊過, 換埋SENSOR. 效果一樣, 有冇高手知咩事?
唔知換芯試好, 定要買過隻...

作者: kkchung 時間: 2011-8-1 02:31

hinwong 發表於 2011-8-1 02:17

登錄/註冊後可看大圖

今日不知不覺玩到108度,收車果刻未覺有事...
之後再著番, 問題就黎.
唔識行..推一推就行(唔覺特別慢),
...

先行確定不是壞 ESC 先。

作者: EC5WVR4PRO4 時間: 2011-8-1 12:31
maybe the ESC bec die

作者: hinwong 時間: 2011-8-1 13:39

EC5WVR4PRO4 發表於 2011-8-1 12:31

登錄/註冊後可看大圖

maybe the ESC bec die

咩係bec?

作者: EC5WVR4PRO4 時間: 2011-8-1 16:43
the bec funtion is change the voltage.

作者: jf813 時間: 2011-8-1 17:32
BEC is the voltage regulator inside the ESC to supply voltage to receiver/ servo. If you servo and receiver is working your problem have nothing to do with it..... If you motor need to push to start. Usually what happen as KK said is the ESC issue...... try to conect another motor to try try......

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)