RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Rock Crawler 慢爬 [打印本頁]

作者: fyin 時間: 2006-9-14 15:09
標題: Rock Crawler 慢爬
Rock Crawler 慢爬車 website

http://rc4wd.com/shop/

大家有興趣可自己動手做番架慢爬車玩玩.
大家有什麼意見?
圖片參考

[ 本帖最後由 fyin 於 2006-9-14 15:14 編輯 ]

作者: RCman 時間: 2006-9-14 15:13

原帖由 fyin 於 2006-9-14 15:09 發表
Rock Crawler 慢爬車 website

http://rc4wd.com/shop/

呢間野口卑麻麻，無貨都吳知，比左$至話無貨。
Ｄ貨寄吳寄出都無人知，吳好係佢個online site買野，要就係ebay佢自己個s-bay store道買，
有咩野事都有ebay出頭

我都幫親過，不過係ebay store

作者: fyin 時間: 2006-9-14 15:22
標題: DIY
大家不要誤會, 我不是叫大家到此店購買, 我是叫大家參考人家設計的車架.
自己做一架.

車架用料:-
鋁板 / 鋁條 / 油壓 / 波頭 / 鏍絲.........that's it.

[ 本帖最後由 fyin 於 2006-9-14 15:27 編輯 ]

作者: RCman 時間: 2006-9-14 15:24

原帖由 fyin 於 2006-9-14 15:22 發表
大家不要誤會, 我不是叫大家到此店購買, 我是叫大家參考人家設計的車架.
自己做一架.

都吳係，呢間野有好多野都係佢有人無，
所以都要幫佢買，不過佢地個on-line store做得真係麻麻。
但佢D料都幾好，係慢D羅

作者: orange00 時間: 2006-9-14 16:35

原帖由 RCman 於 2006-9-14 15:24 發表

都吳係，呢間野有好多野都係佢有人無，
所以都要幫佢買，不過佢地個on-line store做得真係麻麻。
但佢D料都幾好，係慢D羅

我乃曬嘢la, 又delay 兩個禮拜.

今年真係犯太歲.

作者: RCman 時間: 2006-9-14 16:44

原帖由 orange00 於 2006-9-14 16:35 發表

我乃曬?la, 又delay 兩個禮拜.
今年真係犯太歲.

同呢間野order野要有"方法"的

我之前講左吳好直接on-line 訂傢啦！

作者: orange00 時間: 2006-9-14 16:53

原帖由 RCman 於 2006-9-14 16:44 發表

同呢間野order野要有"方法"的
我之前講左吳好直接on-line 訂傢啦！

咁佢ebay度無ma. 全世界得佢有.

作者: gibson 時間: 2006-9-14 18:52
Its look quite simple..

作者: mikewu 時間: 2006-9-14 18:53

原帖由 gibson 於 2006-9-14 18:52 發表
Its look quite simple..

Brother Gibson.... when are you going to join us for "slow climb" ah??

作者: gibson 時間: 2006-9-14 18:59
標題: 回復 #9 mikewu 的帖子
I already got too many virus, please leave me alone. Thanks

作者: mikewu 時間: 2006-9-14 19:06

原帖由 gibson 於 2006-9-14 18:59 發表
I already got too many virus, please leave me alone. Thanks

It's simple ma.... easy to make... try one la... here, this is mine.....

作者: rockdragon 時間: 2006-9-14 19:56
.... and mine ....

作者: SPAWN 時間: 2006-9-14 22:12
個個曬野我都來!!

登錄/註冊後可看大圖

作者: 20051074 時間: 2006-9-14 22:35
請問正一架LEE D洗唔洗10K

作者: SPAWN 時間: 2006-9-14 22:47

原帖由 20051074 於 2006-9-14 22:35 發表
請問正一架LEE D洗唔洗10K

貴有貴玩平有平玩,要幾多錢,改下改下都唔知lo(我D改好多都唔洗錢ga!)

作者: orange00 時間: 2006-9-14 22:48

原帖由 SPAWN 於 2006-9-14 22:12 發表
個個曬野我都來!!

我又曬

登錄/註冊後可看大圖

作者: fyin 時間: 2006-9-15 00:03
Hi Bros,
睇完各位師兄既靚車, 同個fan都有啲衝動想整番架黎玩.
現在計劃中. 用頭尾波箱或中置波箱好呢?

作者: mikewu 時間: 2006-9-15 00:20

原帖由 fyin 於 2006-9-15 00:03 發表
Hi Bros,
睇完各位師兄既靚車, 同個fan都有啲衝動想整番架黎玩.
現在計劃中. 用頭尾波箱或中置波箱好呢?

Is that "friend" of yours name "James"....

I suggest to use Clod Buster's axels since there are more kits for the Clod then TXT....

作者: 宏 時間: 2006-9-15 02:27
我又曬...不過得半架.....

未完全搞掂...

作者: ANGELZ 時間: 2006-9-15 07:18

登錄/註冊後可看大圖

作者: Jackson 時間: 2006-9-15 08:40
宏, are those the maxx braces I see as the chassis? Very clever!

orange00, where did you get that Scion body and what chassis is it for? I love Scion!

作者: Timothypychan 時間: 2006-9-15 09:04
My Car

作者: Timothypychan 時間: 2006-9-15 09:05

作者: RCman 時間: 2006-9-15 09:18
我都post下啦！
My G-made Clod

作者: zls 時間: 2006-9-15 10:38
好靓仔呀!

你地有时间返大陆度假就带埋部车上来一起玩拉!好想认识下大家呀!

作者: orange00 時間: 2006-9-15 10:48

原帖由 Jackson 於 2006-9-15 08:40 發表
orange00, where did you get that Scion body and what chassis is it for? I love Scion!

It's TLT-1 Chasis with ABC CUBE (Copy version)

作者: orange00 時間: 2006-9-15 10:51

原帖由 zls 於 2006-9-15 10:38 發表
好靓仔呀!你地有时间返大陆度假就带埋部车上来一起玩拉!好想认识下大家呀!

有無地方差電

或者你過來香港時也帶你的車一起吧.

作者: ray34567540 時間: 2006-9-15 11:32
我又曬

登錄/註冊後可看大圖

仲幫老友食環署曬埋

登錄/註冊後可看大圖

作者: orange00 時間: 2006-9-15 11:44
各車詳細資料

作者: zls 時間: 2006-9-15 12:57

原帖由 orange00 於 2006-9-15 10:51 發表

有無地方差電
或者你過來香港時也帶你的車一起吧.

我拖个大电瓶过去~慢慢叉都得拉!

不过真系好想下次过去带埋车!

作者: fyin 時間: 2006-9-15 23:39

原帖由 mikewu 於 2006-9-15 00:20 發表

Is that "friend" of yours name "James"....
I suggest to use Clod Buster's axels since there are more kits for the Clod then TXT....

Hi Mike,
Yes you're right.
All bor's crawlers were so great.
I've seen the website, all the motor for crawler should be use 44T~55T at US$20~25.
What motor should be use on yours crawlers?
Thanks your advise.

作者: 宏 時間: 2006-9-16 05:09

原帖由 Jackson 於 2006-9-15 08:40 發表
宏, are those the maxx braces I see as the chassis? Very clever!

orange00, where did you get that Scion body and what chassis is it for? I love Scion!

Yes, thanks!

I used 2 sets maxx braces become my Crawler chassis...
I think this is easily to build the chassis..

作者: mikewu 時間: 2006-9-16 10:44

原帖由 fyin 於 2006-9-15 23:39 發表

Hi Mike,
Yes you're right.
All bor's crawlers were so great.
I've seen the website, all the motor for crawler should be use 44T~55T at US$20~25.
What motor should be use on yours crawlers?
...

Really?  You two wants to get into the crawling business huh!  That's gooooooooood...!
Anyway, most people use 55T motors for the highest climbing power.  But of course, there are 70T or 75T motors that's even more powerful but you'll get sick and tired of going "SUPER SUPER Slow" instead of "Super Slow" for the 55T already....
I use Inteagy products myself for the crawler.  In fact, you can check out Chee Lok since they always claims that they are producing a crawler kit of their own brand.

Hey, when do you guys go to MMS lately?  I have been there 2 weeks in a row but I went on Wednesdays... You still going Tuesdays?

作者: fyin 時間: 2006-9-16 13:11
We can go to MMS on Tue or Wed, Will you go on next Wed?
We have 4 guys to run MB4 and james had 2 more mini buggy, frog & mini-T.
See u on next Wed.

作者: mikewu 時間: 2006-9-16 13:15

原帖由 fyin 於 2006-9-16 13:11 發表
We can go to MMS on Tue or Wed, Will you go on next Wed?
We have 4 guys to run MB4 and james had 2 more mini buggy, frog & mini-T.
See u on next Wed.

Wait wait wait wait wait... I might not make it this coming Wednesday... but I'll try Wednesday after.... These days I am playing with a guy who are just crazy about Mini Ts... And I am with my old friend MB4..

作者: rockdragon 時間: 2006-9-19 12:07
Brothers ...... I just want to show you this Fully Custom 2.2" Class Crawler that was built by my friend ... RC_Guru ... in Thailand.

Stick design that has the main piece made from Stainless Stell tube that was left over from making the Fence around the house.
The rest was fab from aluminium plate to hold up the Gearbox that took from the old Tamiya Dyna Blaster.
What you see now is the first try that has not been test-run yet.

Here we go ....

登錄/註冊後可看大圖

作者: RCman 時間: 2006-9-19 12:38
concept is same as the US"s crawler "STICK"??
Great job

作者: orange00 時間: 2006-9-19 13:02
Wa, it should be very very heavy one.

作者: rockdragon 時間: 2006-9-19 13:51

原帖由 orange00 於 2006-9-19 13:02 發表
Wa, it should be very very heavy one.

No, it's not heavy at all.
In fact this stanless steel tube is very thin and lighter than aluminum tube which has the same outer diameter. So the most heavy thing that hang up there is the Motor. But I will wait for his Test-run report comes out and let you know again.

作者: mikewu 時間: 2006-9-19 13:57

原帖由 rockdragon 於 2006-9-19 13:51 發表

No, it's not heavy at all.
In fact this stanless steel tube is very thin and lighter than aluminum tube which has the same outer diameter. So the most heavy thing that hang up there is the ...

That's a very nice crawler.. thanks for sharing... and one thing that's for sure about this crawler.... it's easy to carry......

作者: key 時間: 2006-9-28 16:44

原帖由 fyin 於 2006-9-14 15:22 發表
大家不要誤會, 我不是叫大家到此店購買, 我是叫大家參考人家設計的車架.
自己做一�

車架用料:-
鋁板 / 鋁條 / 油壓 / 波頭 / 鏍絲.........that's it.

brother......? where buy 鋁條 thx .....

作者: jpmontoya2 時間: 2006-9-28 17:00
Well....

Here is mine....hehe..Gmade Spider

登錄/註冊後可看大圖

作者: orange00 時間: 2006-9-28 17:52
進化了
ORANGE TLT

作者: mikewu 時間: 2006-9-28 17:55

原帖由 orange00 於 2006-9-28 17:52 發表
進化了
ORANGE TLT

Brother Orange, I am going to talk to you more about your TLT transform... I am working on one..

作者: orange00 時間: 2006-9-28 18:02

原帖由 mikewu 於 2006-9-28 17:55 發表

Brother Orange, I am going to talk to you more about your TLT transform... I am working on one..

Mike, you are always welcome.

作者: mikewu 時間: 2006-9-28 18:06

原帖由 orange00 於 2006-9-28 18:02 發表

Mike, you are always welcome.

Thanks dude........... crawling party this week yea? Make sure you take photos.........

作者: SPOONACCORD 時間: 2006-9-28 20:55
咁勁～

作者: fyin 時間: 2006-9-28 23:19

原帖由 key 於 2006-9-28 16:44 發表

brother......? where buy 鋁條 thx .....

Hi Bro,
旺角新填地街,約339號, 熟食大排檔對面有間好大間專買鋁料
的舖頭.
有6061鋁條, 圓支, 鋁片等等.

作者: yuch 時間: 2006-9-29 00:30

原帖由 fyin 於 2006-9-14 15:22 發表
大家不要誤會, 我不是叫大家到此店購買, 我是叫大家參考人家設計的車架.
自己做一?img src="images/smilies/lol.gif" smilieid="12" border="0" alt="" />

車架用料:-
鋁板 / 鋁條 / 油壓 / 波頭 / 鏍絲.........that's it.

where can buy ?>>鋁板 / 鋁條 / 油壓 / 波頭 / 鏍絲.........

作者: key 時間: 2006-9-29 09:32

原帖由 fyin 於 2006-9-28 23:19 發表

Hi Bro,
旺角新填地街,約339號, 熟食大排檔對面有間好大間專買鋁料
的舖頭.
有6061鋁條, 圓支, 鋁片等等.

thx ..... brother

作者: fyin 時間: 2006-9-29 12:06

原帖由 yuch 於 2006-9-29 00:30 發表

where can buy ?>>鋁板 / 鋁條 / 油壓 / 波頭 / 鏍絲.........

Hi 各位師兄,
用料地址如下:-

作者: Skyline 時間: 2006-9-29 20:50

原帖由 fyin 於 2006-9-29 12:06 發表

Hi 各位師兄,
用料地址如下:-

oh brother, even for graphite board?? Good news !!

作者: orange00 時間: 2006-9-29 22:25

原帖由 Skyline 於 2006-9-29 20:50 發表

oh brother, even for graphite board?? Good news !!

Yes. But after you buy it. You need to think about how to cut and drill it.

I had an experience.
For drilling the CF board, you need a carbon steel drill bit and HISPEED DRILL!

For cutting it, you need a milling machine to make a nice shape.

作者: orange00 時間: 2006-9-30 02:59

原帖由 mikewu 於 2006-9-28 18:06 發表

Thanks dude........... crawling party this week yea? Make sure you take photos.........

Sure take photo and video. But seems everybody had some new item to test at that day. Will be very busy.

Any other brothers feel interesting. Please find following link for the activities detail.
Or you may PM me to leave me a contact.

http://rctpp.com/bbs/topic.cgi?forum=26&topic=358&show=0

作者: etopidea 時間: 2007-7-19 23:04
我的改裝慢爬車：

登錄/註冊後可看大圖

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)