RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Yeah Racing RPM sensor for MT4 讀數是否準確? [打印本頁]

作者: joesample    時間: 2011-8-10 17:41
標題: Yeah Racing RPM sensor for MT4 讀數是否準確?
Hi C-Hing, Yeah Racing RPM sensor for MT4 讀數是否準確?
(It seems the RPM data from the Yeah Racing sensor is different from the RPM data from the MT4 sensor.... maybe it is just my installation problem too..)
作者: hinwong    時間: 2011-8-10 17:45
joesample 發表於 2011-8-10 17:41
Hi C-Hing, Yeah Racing RPM sensor for MT4 讀數是否準確?
(It seems the RPM data from the Yeah Racing ...

yr果個, 係測摩打轉速, 如果mt4原裝, 係測佢果張貼紙. 可能有d唔同...我估....
作者: ives123    時間: 2011-8-10 18:58
本帖最後由 ives123 於 2011-8-10 19:01 編輯

回復 joesample 的帖子

準,試過兩部車都無問題,(A 組閒閒地8x km/h,仲要唔係大直路)唔怪得跟唔到啦
想睇車速,最好計番個 roll out (好似係咁串),入落mt4,然後睇km/h 會易睇D
作者: hinwong    時間: 2011-8-10 19:23
ives123 發表於 2011-8-10 18:58
回復 joesample 的帖子

準,試過兩部車都無問題,(A 組閒閒地8x km/h,仲要唔係大直路)唔怪得跟唔到啦

CHIN個roll out 點計? 唔係好明
作者: ives123    時間: 2011-8-10 19:52
回復 hinwong 的帖子

車轆直徑x3.14除車既齒比。
答案就等於motor每轉一圈架車向前行幾長,
入落mt4,佢就會識得計番車速,正!
如果你用原裝rpm sensor,就要睇你check大減定大pully
,計法有小小唔同,原理一樣
作者: ives123    時間: 2011-8-10 20:25
回復 joesample 的帖子

唔記得講入數落mt4佢係以十個圈計,即是張(答案X 10)




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2