標題: Vintage KO ESC [打印本頁] 作者: emaxxyeung 時間: 2011-8-17 01:06 標題: Vintage KO ESC post 下 D vintage KO ESC,等各位回想下當年.
由呢個開始
Racing Max RM-7
體積:45 x 63 x 34MM (120g)
for: 6V NI-CD,
540S motor
15A(max 20A)
作者: min 時間: 2011-8-17 01:16
當年都買¥6800円,Ching你一定好有錢!作者: emaxxyeung 時間: 2011-8-17 01:21
yes......作者: minimini 時間: 2011-8-17 02:04
我有一隻 Nova 電變 (土炮新星出品).......個樣好似你呢款 Racing Max RM-7........我諗都好大機會係 Nova 抄襲 KO ..........等我過兩日 post 張相出嚟先....... 作者: emaxxyeung 時間: 2011-8-17 02:05
呢隻RM-7 金仔.好易燒作者: emaxxyeung 時間: 2011-8-17 02:07
作者: tiger1 時間: 2011-8-17 06:12
480 was a challenge to use 作者: chiu 時間: 2011-8-17 09:28
行relay的电變十分cute, 行起黎,"啲啲得得",十分懷念作者: 工行李e旗 時間: 2011-8-17 11:06
好經典下wo, 呢d都算係IC廣泛應用前o既機械式產品作者: emaxxyeung 時間: 2011-8-17 12:34
想當年,對呢D產物,真係又愛又恨,
愛者.终於可以擁有,可以威下。
恨者,價錢又貴,又易燒。
念起都.......作者: polarbear 時間: 2011-8-17 12:53
Quite heavy. If using 7.2 v, there was another external relay box, making it much heavier....Hum, I should dig out mine 作者: emaxxyeung 時間: 2011-8-17 14:19
呢隻 Racing Max RM-7
有無師兄用過呢?作者: 工行李e旗 時間: 2011-8-17 14:38
I had one. That is a rheostat (Porcelin coil resistor) to adjust the maximum strenght of the brake. It is connected externally via a KO servo plug. So the whole unit is the main unit, an external relay and an external brake adjuster. Ah, it also use a fuse, those glass 13A home type . It was so heavier.作者: emaxxyeung 時間: 2011-8-18 12:00 回復 polarbear 的帖子
THX Ching.
o i see.any pics of the option part.(the rheostat ). 作者: aattaa 時間: 2011-8-18 12:01
"由人操控,最後成績都决定於大會,(隻手遮天)" it is all because this kind of rubbish that I lost interest eventually... 作者: chiu 時間: 2011-8-23 21:11 本帖最後由 chiu 於 2011-8-23 21:30 編輯
Red KO Racing Max RM-7, is it an older or a newer one than that with heat sink (photo at 1#) . Thanks
please take a look to the post #77(pics 1)作者: emaxxyeung 時間: 2011-8-24 19:03
how about this one.
KO CX I作者: tiger1 時間: 2011-8-24 20:29
D esc 真係好很正呀師兄們作者: emaxxyeung 時間: 2011-8-24 22:25 本帖最後由 emaxxyeung 於 2011-8-24 22:26 編輯