RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: [quick help?] tt01 upgrades question [打印本頁]

作者: lceriyirri    時間: 2006-9-21 08:22
標題: [quick help?] tt01 upgrades question
refering http://bbs.rc-evo.com/viewthread.php?tid=185&extra=page%3D1
about post 5-9...

will these work on the tt01 just like that tt01 in the guide?
http://www2.towerhobbies.com/cgi ... mp;I=LXNM34&P=7
http://www2.towerhobbies.com/cgi ... mp;I=LXGH71&P=7
http://www2.towerhobbies.com/cgi ... mp;I=LXGM26&P=7
http://www2.towerhobbies.com/cgi ... mp;I=LXFSB6&P=7

If yes, I will order them soon because I don't live in hk.

thanks


edit: anyone knows?

[ 本帖最後由 lceriyirri 於 2006-9-21 09:08 編輯 ]
作者: AMAT    時間: 2006-9-21 11:05
狗骨應該係39MM長,唔係42MM長.
作者: lceriyirri    時間: 2006-9-21 12:01
原帖由 AMAT 於 2006-9-21 11:05 發表
狗骨應該係39MM長,唔係42MM長.


other things look fine?
and a thousand thanks

ok find them: (just to double check)
http://www2.towerhobbies.com/cgi ... XNM34& right?
http://www2.towerhobbies.com/cgi ... XGH71& right? x2
http://www2.towerhobbies.com/cgi ... XGM26& right? x2
http://www2.towerhobbies.com/cgi ... mp;I=LXWC01&P=7 right? x2

It's 57.53 USD...
so, in HKD, it'd be 456? no it's not worth it, but i have a $20 off coupon.
37.5 w/o shipping (probably $10) usd, so it's 300... still worth it, but at least i don't need to make a trip back to hk...

[ 本帖最後由 lceriyirri 於 2006-9-21 12:37 編輯 ]
作者: AMAT    時間: 2006-9-21 12:37
原帖由 lceriyirri 於 2006-9-21 12:01 發表


other things look fine?

and a thousand thanks

closest one
http://www2.towerhobbies.com/cgi ... mp;I=LXMGK8&P=7
41mm

would it work?
3mm shouldn't be much di ...


會頂住的......
因為車頭轉向要有虛位先可以轉得順.....你逼到緊晒轉唔到灣......

我建議你不如買四支TA04萬向節好過.
作者: lceriyirri    時間: 2006-9-21 12:40
woops, i edited the post. and I can't find the universal shaft (萬向節, right?) on that web.

http://www2.towerhobbies.com/cgi ... mp;I=LXNM34&P=7 (looks right to me)
http://www2.towerhobbies.com/cgi ... mp;I=LXGH71&P=7 (how come one cup has a shaft?)x2
http://www2.towerhobbies.com/cgi ... mp;I=LXGM26&P=7 (it's for tb02, so would it work?)x2
http://www2.towerhobbies.com/cgi ... mp;I=LXWC01&P=7 (ha, didn't see it in the first place.)x2

[ 本帖最後由 lceriyirri 於 2006-9-21 12:43 編輯 ]
作者: ifrogi    時間: 2006-9-21 13:46
towerhobby D 野好似有d 貴架喎
有無諗下其他 online site?
格下先~ 我成日都係咁  格哂d site 先買~
haha
作者: 銅鑼灣大帝    時間: 2006-9-21 13:55
yes, you should buy on ebay, but should avoid rXmart as they are very slow on shipping other singaporean sellers are faster
作者: lceriyirri    時間: 2006-9-21 14:50
tower is expensive. i know that, but with the coupon ($20 off for $50 order)... so...
and other sites aren't as cheap. (i checked many times in other sites.)
for ebay, I just don't find the parts i want.

shameless talk: and, are those these the right ones?
post #5
ya, i want a clear answer, exspecially the third one.

thanks
作者: lceriyirri    時間: 2006-9-22 01:58
標題: another question
if i just get the bevel gear http://www2.towerhobbies.com/cgi ... mp;I=LXNM34&P=7
and hard joint cup http://www2.towerhobbies.com/cgi ... mp;I=LXGH71&P=7
can i use the orgrinal tt01 dog bone? the pastic one?
作者: GigaRacer    時間: 2006-9-22 08:40
原帖由 lceriyirri 於 2006-9-20 22:50 發表
tower is expensive. i know that, but with the coupon ($20 off for $50 order)... so...
and other sites aren't as cheap. (i checked many times in other sites.)
for ebay, I just don't find the parts ...



Towerhobbies?  I thought they are out of business??  Their website has been down for months
作者: lceriyirri    時間: 2006-9-24 14:09
really? they said they are sending me my stuff that i ordered them a while ago.

and they have newletters and promo sent to my emails.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2