RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: HPI Savage X SS [打印本頁]

作者: WTO    時間: 2006-9-23 10:28
標題: HPI Savage X SS


[ 本帖最後由 WTO 於 2006-9-23 11:29 編輯 ]
作者: MatthewChoi    時間: 2006-9-23 10:31
COOL~!
作者: WTO    時間: 2006-9-23 10:36
標題: aluminium diff cases both front & rear

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:37
標題: Alloy diff cups with steel pin guides

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:38
標題: Shimmed spider gears, pinion gears, diff case bearings

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:38
標題: Hardened and lightened “Racing” clutch bell

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:39
標題: Heavy duty machined steel spur gear

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:40
標題: Steel Clutch Bell Spacer

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:41
標題: Transmission Case with increased rigidity.

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:41
標題: Engine mount with engine nose support, adjustable

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:42
標題: Thicker 2.5mm engine plate, 7075 aluminium. (previously 2.0mm)

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:44
標題: Features
High Performance Polished Tuned Pipe
Dual chamber design for higher top speed and wide power band.

Dirt Bonz tyres
40% lighter than the GT Truck tyres for more speed, soft and sticky S-compound rubber for high traction on dirt surfaces.

Front and Rear Skidplate Bumpers
Realistic skidplate bumpers made of high impact nylon look great and minimize crash damage.

Cam Type Servo Saver
Adjustable design allows precise tuning for optimal steering response and extra servo gear protection.

Dual Disc Brake
Stainless steel, drilled disc brakes provide serious stopping power, enough to do "brakies" on command.

4-Gear Differentials
For increased drivetrain durability as well as extended time between maintenance.

Heavy Duty Diff Shafts and Cup Joints
Hardened for extra strength and to lengthen the time between re-builds.

Heavy Duty Dogbones
A powerful engine requires a heavy duty drivetrain for durability. We've got you covered with heavy duty dogbones, diff shafts and cup joints.

2 Speed!
Adjustable 2 speed transmission with heavy-duty metal internal gears for durability, bottom end punch and high top speed. Adjustable slipper clutch for drivetrain protection.

Adjustable Upper Arms
Turnbuckles allow easy adjustability of the suspension geometry for improved handling and performance.

Easy Maintenance!
Quick access to the front or rear differential by removing six screws.

Redesigned Radio Box
New radio box with extra room for electronics, includes provisions for an external battery level indicator and an optional charging jack. Easy-to-use design eliminates the need for clips.

Easier To Work On!
The center gearbox can be accessed without removing the chassis plates. Just remove six screws and the top case lifts off for quick and easy transmission maintenance.

Low CG TVP chassis
The new chassis design lowers the center of gravity for stable handling and faster lap times.

Lightweight suspension arms
New lightweight suspension arms deliver quick suspension response and reduce overall truck weight.

More Adjustability
Adjustable turnbuckles allow you to make quick and easy suspension adjustments. New shock towers have three different shock mounting positions for a variety of suspension setups.

Chrome Warlock wheels with tough 17mm hex hubs
Large 17mm metal alloy hex hubs hold the wheels securely and prevent stripping.

Fully Compatible
Compatible with most existing Savage (21, 25, SS) option parts
作者: WTO    時間: 2006-9-23 10:45
標題: K4.6 Pull Start Engine

                               
登錄/註冊後可看大圖

作者: WTO    時間: 2006-9-23 10:49
標題: video
http://www.hpieurope.com/graphics/kits/kitpages/862/FinalComp.wmv
作者: WTO    時間: 2006-9-23 10:50

862 - Savage X SS
1/8 scale 4WD nitro powered truck kit with K4.6 (cc) engine, clear & trimmed Nitro GT-2 truck body. Unassembled with no radio, no electronics.
Includes comprehensive instruction manual and HPI RC Cars DVD.
作者: WTO    時間: 2006-9-23 11:06


[ 本帖最後由 WTO 於 2006-9-24 09:52 編輯 ]
作者: WTO    時間: 2006-10-1 19:42
around HK$3.3K
作者: 中遠    時間: 2006-10-2 00:04





歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2