RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: XRAY T2R & T2 [打印本頁]

作者: raymondnam 時間: 2006-9-30 03:53
標題: XRAY T2R & T2
想砌部新車 (新手) 預算希望$4000內,MAX$5000
已有叉機及電

想買T2R or T2
跟住點砌好,
大家有咩意見????

PS:想買一支好少少o既控(唔駛非常非常高級),

作者: Chrispo 時間: 2006-9-30 09:01
Would you be able to wait for a little bit longer? The new T2'007 is coming and should arrive in December or even a bit earlier. The price should be very close the existing T2.

作者: Timothypychan 時間: 2006-9-30 09:20

原帖由 raymondnam 於 2006-9-30 03:53 發表
想砌部新車 (新手) 預算希望$4000內,MAX$5000
已有叉機及電

想買T2R or T2
跟住點砌好,
大家有咩意見????

PS:想買一支好少少o既控(唔駛非常非常高級),

T2R = 13XX.
GTB 3.5 OR LRP 4STAR=$2200
EX10=$1900
WRX SERVO = $7XX

一次過買支好控, 好過遲D換.

作者: anthony430 時間: 2006-9-30 11:57

原帖由 Timothypychan 於 2006-9-30 09:20 發表

一次過買支好控, 好過遲D換.

完全同意

作者: raymondnam 時間: 2006-9-30 13:36

原帖由 Timothypychan 於 2006-9-30 09:20 發表

T2R = 13XX.
GTB 3.5 OR LRP 4STAR=$2200
EX10=$1900
WRX SERVO = $7XX

一次過買支好控, 好過遲D換.

我有D想用23To既摩打,
GTB 3.5 OR LRP 4STAR我怕會太快,好難控制.........
EX10係咪好過3PK好多???

其實T2R同T2'007係咪差好遠???
我想買左之後唔駛點改就最好.
大家對T2R有咩意見,覺得架車好唔好.

作者: Timothypychan 時間: 2006-9-30 13:50

原帖由 raymondnam 於 2006-9-30 13:36 發表

我有D想用23To既摩打,
GTB 3.5 OR LRP 4STAR我怕會太快,好難控制.........
EX10係咪好過3PK好多???

其實T2R同T2'007係咪差好遠???
我想買左之後唔駛點改就最好.
大家對T2R有咩意見,覺得架車好唔好.

就算係T2, 你買返嚟都有嘢要加
我自己就覺得T2R好平. 四條HUDY CVD 都6百啦. PARTS好多都可共用T2.
車價平一半, 性能不比T2差太多. 不過要換頭差速, 跟車係珠差.

玩電車EX-10好D.

你買個好D ESC 加23T都一千元左右. GTB+4.5R 都係$1700.
無刷好在不用成日保養.
如果驚太快, 唔好買3.5R, 4.5R, 買5.5R.

[ 本帖最後由 Timothypychan 於 2006-9-30 13:54 編輯 ]

作者: zoozoo 時間: 2006-9-30 14:14
买3.5R4.5R都无所谓，系个控到可以调快慢

作者: raymondnam 時間: 2006-9-30 23:37
買左啦

登錄/註冊後可看大圖

T2R $1400
GTB+4.5R $1800
Futaba Servo S9550 $485
Spur Gear "H" 87T / 48 $3X
48DP TELFON COATED ALUM PINION 14 TEETH $3X
控要遲D先買

作者: zoozoo 時間: 2006-10-1 00:56
14T摩打齿加87T大饼齿好似系成11齿比喔，甘你嘛车嘛爆到晕？

如果真系0岩0岩开始玩GE话都系调到70%左右好啦，快过头真系锅锅金啊

作者: raymondnam 時間: 2006-10-1 04:03
有咁o既事...................

作者: cncsa 時間: 2006-10-4 12:03
不知道組裝過後有無優缺點呢???
油門因該只有開一半吧

作者: Timothypychan 時間: 2006-10-4 12:11

原帖由 zoozoo 於 2006-10-1 00:56 發表
14T摩打齿加87T大饼齿好似系成11齿比喔，甘你嘛车嘛爆到晕？
如果真系0岩0岩开始玩GE话都系调到70%左右好啦，快过头真系锅Ž ...

用17T會好D.
仲有換咗原裝個頭差速.

作者: raymondnam 時間: 2006-10-4 13:28

原帖由 Timothypychan 於 2006-10-4 12:11 發表

用17T會好D.
仲有換咗原裝個頭差速.

我睇你地話無刷好d,所以買左gtb4.5............

換頭單嗎????

作者: rsx 時間: 2006-10-4 14:01
raymondnam hing,

Are you new to this hobby? (I mean do not have experience driving a fast rc car ? )
If this is true, please stick to the front differential first. It is easier to control when you apply break (slow down in corner).

Of course, if you have the money, it is best to buy the front one way and try out which setup you like.

作者: Chrispo 時間: 2006-10-4 14:14
Hi Bro. raymondnam, I've been running T2 with 4.5 for months. I found with such a high power system, a front differential or even the solid axile will be good for you since you can brake anytime and as hard as your own will. You will find it a lot easier to drive.

作者: raymondnam 時間: 2006-10-4 15:33

原帖由 rsx 於 2006-10-4 14:01 發表
raymondnam hing,

Are you new to this hobby? (I mean do not have experience driving a fast rc car ? )
If this is true, please stick to the front differential first. It is easier to control w ...

yes ,this is my first time to try this hobby.
my english is not very good

,your meaning i LOCK TIE the front differential ,
then the front differential will be like one way???
thx for your suggestion,this information is very helpful for me,
i will try this setting

thanks

作者: Timothypychan 時間: 2006-10-4 15:38

原帖由 raymondnam 於 2006-10-4 13:28 發表

我睇你地話無刷好d,所以買左gtb4.5............

換頭單嗎????

17T摩打齒.
無錯, 換頭單

作者: raymondnam 時間: 2006-10-4 15:40

原帖由 Chrispo 於 2006-10-4 14:14 發表
Hi Bro. raymondnam, I've been running T2 with 4.5 for months. I found with such a high power system, a front differential or even the solid axile will be good for you since you can brake anytime an ...

your meaning front differential is better than one way???

作者: raymondnam 時間: 2006-10-4 15:47

原帖由 Timothypychan 於 2006-10-4 15:38 發表

17T摩打齒.
無錯, 換頭單

sorry,我之前誤解左

17T摩打齒,大餅應該用多少t呢??????

換左之後係咪會易控制d?????

作者: raymondnam 時間: 2006-10-4 16:04
有冇人知對頭單幾錢???

作者: rsx 時間: 2006-10-4 16:20
raymondnam hing,

What I mean is the front differential is easy to drive.

Front one way is hard to drive.

(and the front one way will cost "some" money too, as it is from team-xray)

It is better to spend extra money on tire first

(you may need two to three set of rubber tire of different temperature)

[ 本帖最後由 rsx 於 2006-10-4 16:28 編輯 ]

作者: raymondnam 時間: 2006-10-4 16:37
oic

thanks
why too much people say one way is better???
anyway i will use differential for few week first,
because over budget too much now

i think one way is so expensive

作者: rsx 時間: 2006-10-4 16:40
One way is better for experienced driver. (for example in high speed high traction track, like those japanese track in their national race)

Front one way and differential require different driving style. Front differential is more suitable for most beginner's driving style. (heavy acceration, heavy break)

Which is faster depends on the track and the driver style. Sometimes the front differential is faster, sometimes front one way is faster, or front solid axle is faster.

Yes, one way is expensive, xray one way is even more expensive.

If budget allow, try the one way and you'll know the difference.

[ 本帖最後由 rsx 於 2006-10-4 16:51 編輯 ]

作者: Chrispo 時間: 2006-10-4 18:56
As mentioned by Bro RSX, front one-way is expensive and difficult to mask with the technique to drive with it. Front one-way has been shown to suit with big tracks and tracks with good traction so you don't have to brake that much. Running your car at the tracks in HK will require lots of brakes and hard acceleration if you are a beginner. So that's why, people are advicing you to go for a solid axile or front diff. They make the car having better handling at your level.

作者: SPOONACCORD 時間: 2006-10-4 18:59
部ｔ２ｒ幾錢呀～？

作者: raymondnam 時間: 2006-10-5 02:08

原帖由 SPOONACCORD 於 2006-10-4 18:59 發表
部ｔ２ｒ幾錢呀～？

$1400

作者: jontang001 時間: 2006-10-5 12:44
標題: 回復 #15 Chrispo 的帖子
Sorry, I am a new guy for XRAY TC...
What is the difference between T2 and T2R???

作者: rsx 時間: 2006-10-5 13:28
why not ? beginner should use silver can ?

I think brushless is quite good for beginner. Their low maintanence is very suitable for beginner, only the high speed 4.5R is too fast.

作者: Chrispo 時間: 2006-10-5 13:33
I guess the high speed of 4.5R makes it difficult to handle well. If you just run your car at straight, no corners, 3.5R should be the choice instead of 4.5R. I think for the beginner, it will take a bit of time to get use to the character of 4.5R and everybody can enjoy the brushless power.

作者: rsx 時間: 2006-10-5 14:10
Yeah, it is true.

But everybody wants a fast car.

原帖由 lung 於 2006-10-5 14:03 發表

唔係唔得既...易dTOT車姐..

作者: rsx 時間: 2006-10-5 14:20
Good suggestion.  But he already bought the stuffs.

Can the 4.5R set be tuned to a lower speed ?  (or make use of the transmiter setting to limit the maximum speed).
I'm not sure about this cause I don't have it.

I think it is better to make use of the 4.5R set than buy another set of ESC and motor, just for starting out.

It is good to buy one set of ESC and motor which you can continue use after your skill improve.  In the long run, it saves money.
( if they survive ...... )

原帖由 lung 於 2006-10-5 14:15 發表
一開頭玩襟快實撞.. .. 比我就會買隻23t + vfs-1 ,,
其餘d錢用黎買控同埋買呔仲好... . .. ..

[ 本帖最後由 rsx 於 2006-10-5 14:22 編輯 ]

作者: raymondnam 時間: 2006-10-5 21:46
初初我都諗住買23t,但係你地話買無刷好d,因為如果真係驚太快,
可以o係個控都set慢d,用4.5可以以後唔駛再upgrade個motor & esc,方便d,
所以買左4.5

作者: 馮馮ymc 時間: 2006-10-5 22:08

原帖由 raymondnam 於 2006-10-5 21:46 發表
初初我都諗住買23t,但係你地話買無刷好d,因為如果真係驚太快,
可以o係個控都set慢d,用4.5可以以後唔駛再upgrade個motor & esc,方便d,
所以買左4.5

乜真係買架法拉利揸出街吓吓極速咩!!!

買咗4.5都可以用有刷程式玩白皮豬架,再唔係揸慢d先,適應一下冇事嘅,
東東買晒,唔通唔玩咩!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)