但係要留意03個車架係易爛好多的 作者: Chicken13h 時間: 2011-12-13 20:39
thanks a lot, but I have already bought a mr 02mm, with aston martin, ready set....作者: Chicken13h 時間: 2011-12-13 20:41
wt is the main different of rm 02 mm and2.4G 02 RTR???作者: Chicken13h 時間: 2011-12-13 20:42
and also.......wt is the main different od am27 and 2.4 G?????thx a lot....^^作者: HN577 時間: 2011-12-13 20:46
MR02 MM=配中置犘打坐的MR02
2.4G MR02 RTR=2.4G底板的MR02套裝車
2.4G同AM27係頻道,AM27已過時,宜家流行2.4G作者: Chicken13h 時間: 2011-12-13 20:49
is 2.4 G better? can play further?作者: ttprince 時間: 2011-12-13 21:07 回復 Chicken13h 的帖子
干擾少d...距離遠d作者: ttprince 時間: 2011-12-13 21:08
你買mr02 mm套裝車係o米950?
最平850作者: Chicken13h 時間: 2011-12-13 22:10
I buy it online.........
are you new to mini z too???
anyway, nice to meet you^^作者: ttprince 時間: 2011-12-13 22:12 回復 Chicken13h 的帖子
我玩左1年左右作者: Chicken13h 時間: 2011-12-13 22:13
btw, I have got another question.......
which 殼 can fit in my mr02?作者: Chicken13h 時間: 2011-12-13 22:14
oic, I am very new to mini z, and I have just bought my mr 02 mm.......and asking if there is any suggestion for a new guy to upgade his car........作者: Chicken13h 時間: 2011-12-13 22:18
I am still using the motor that it come with the ready set, and I would like to use the motor that I bought long time ago for my 4wd........longlong time ago......and is it ok for me to do that? and anyone try that be4?作者: ttprince 時間: 2011-12-13 22:24
任何mini z motor都可裝,不過如果你之前個motor好耐,可能裏面已經.....
至於適合你mr02 mm 的殼可上官網o弟作者: HN577 時間: 2011-12-13 22:28 回復 Chicken13h 的帖子
我都係MINI Z新手=]ONLINE買車?好似幾貴架WOR
我真係無乜見過人用四驅車犘打玩MINI Z,我諗原因可能係四驅車犘打對比起MINI Z犘打轉速並唔高,同埋四驅車犘打本身係冇焊電容,用黎玩MINI Z可能會疾油,有錯請指正作者: Chicken13h 時間: 2011-12-13 22:29
how much for a faster motor.....any suggestion ?and with model no. plz......thx^^作者: Chicken13h 時間: 2011-12-13 22:30
oic....thx HN 577作者: Chicken13h 時間: 2011-12-13 22:34
btw what 'car' are you using?作者: Chicken13h 時間: 2011-12-13 22:35
also, is awd better than mr02( not awd)?作者: Chicken13h 時間: 2011-12-13 22:36
my profile pic is my 'car'作者: ttprince 時間: 2011-12-13 22:57
不如吳好一層打一句
買o羊motor視乎你追求o羊...如果你去車場玩...都係買京商xspeed就足夠了$120
awd的特點是可以漂移
而mr02是racer..不可漂移
另外想問下你係o米用2.4g?作者: Chicken13h 時間: 2011-12-13 23:07
no ar.........
am27 only.......作者: Chicken13h 時間: 2011-12-13 23:07
I will change the motor first作者: Chicken13h 時間: 2011-12-13 23:08
but will awd faster than mr02?作者: ttprince 時間: 2011-12-13 23:22
快吳快係o弟motor同電姐
btw你係網上買mr02 am readyset應該貴出面30%作者: Chicken13h 時間: 2011-12-13 23:25
I bought from someone.......not online shop.......only $550, it is a brand new mr-02 mm, with an extra motor and the am27 controller作者: ttprince 時間: 2011-12-13 23:42
ic..with the extra motor ?
wt do u mean..got 2 motors in the box?作者: Chicken13h 時間: 2011-12-13 23:45
yes, one is in the 底盤, and there is one more for me to change....
and because my fd is going to buy a car as well, so he would like to know the different between mr02 and awd, like should he buy awd?作者: ttprince 時間: 2011-12-13 23:49
i dont suggest playing an awd as i think its structure is more complicated
and the parts are more expensive...
however if ur fd would like to drift..awd is his best choice
the extra motor called like "eco" something is a faster motor..u can try it first instead of
buying a new Xspeed作者: Tat-tat 時間: 2011-12-14 00:26
I think you need to consider one point, that is did your AM electric board have any FET modification. If you change to Kyosho X-Speed, it is no matter. If you change other modify motors that you may need some modify for the FETs because that motors need more amp provide from the electric board. Especially is AM version, that FETs are old version and not support powearful motors. As my remember, AM electric board only support Kyosho X-Speed. Other stock motors mentioning no modify on electric board are not support by AM, that only support by AD and 2.4Ghz version.作者: Chicken13h 時間: 2011-12-14 00:44
thx ching^^ btw there is an question......is there 2nd hand awd that ching know to buy?作者: Chicken13h 時間: 2011-12-14 00:48
re: ttprince, yes it is call 'eco', 550 for this is cheap or expensive?作者: Tat-tat 時間: 2011-12-14 02:40
You may need to search in "二手買賣區" page or go to KWS take a look.
You just back to HK? I think you need to search more information before take further action.
AWD is 4WD car and need much modification on the car to have better handling, in other word, the handling is build by money. So, search before action.
Collecting information, you can search the old posts, walk around KWS and co to the track. Currently, Hong Kong have two tracks and are located in MongKok.
One is MMS the other is Club Track (CT). Both have friendly racers and keeper, you can take a look and bring with your car is not a must. Of cause you can't drive on the track without bring your car and paid the fee.作者: Chicken13h 時間: 2011-12-14 02:43
thx a lot ching!!!I am not just back, but just start on mini z, and just buy the mr02, so looking for help to make it better^^作者: Chicken13h 時間: 2011-12-14 02:52
ching, if $900 for a 95% new 2nd hand awd am27 with control with head light, is it ok?作者: Tat-tat 時間: 2011-12-14 02:56
Don't purchase AM version any more. It is too old and usual jam (Due to AM)作者: Chicken13h 時間: 2011-12-14 03:59
Ok, thx Ching, also, if purchasing 2.4G, wt controller should I buy? Be cox I can see some controller is very cheaper in yahoo...can I use them?作者: Tat-tat 時間: 2011-12-14 14:10
Cheapest controller should be Kyosho KT18 Transmitter.
It is around HKD480.00作者: Chicken13h 時間: 2011-12-14 15:59
do i need to use the controller from kyosho?作者: Tat-tat 時間: 2011-12-14 16:27
You can use KO EX-10, Futaba 3PK transmitters.
Just purchase the KO module for Mini-z (AM 'Red color', AD 'Green color' or 2.4Ghz 'Black color'), if use Futaba you need to add a adaptor.
Transmitter around $1xxx
Module around $300-700 (AM is cheapest , 2.4Ghz is dearest)作者: Chicken13h 時間: 2011-12-14 18:04
oic^^ thx a lot!!!