粉電問題 - RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

ft12v7.jpg (3.95 KB, 下載次數: 8)

下載附件

2011-12-21 17:10 上傳

Photo is for 12V 7AH and Size around triple as 6V 4AH

Wish can help you

作者: cytnet 時間: 2011-12-21 17:44
我可能要買細過呢舊

作者: JerryLeung12 時間: 2011-12-21 17:46

cytnet 發表於 2011-12-21 17:44

登錄/註冊後可看大圖

我可能要買細過呢舊

What type of Motor you use? 12V or 7.2-8.4V?

作者: cytnet 時間: 2011-12-21 17:48
7‧2v

作者: JerryLeung12 時間: 2011-12-21 17:50

cytnet 發表於 2011-12-21 17:48

登錄/註冊後可看大圖

7‧2v

NIMH more better wow.. only my suggestion only.
you use 6V.. and output sure not 6V and will slow down proportional if you use lead-acid battery, but NIMH can output exactly 7.2V all time if you have a good charger

作者: JerryLeung12 時間: 2011-12-21 17:52
Some more experience comments is you can use a parallel card to connect 2 5000maH NIMH battery (7.2V), it can play for long time and enough loading in the tug boat... but need more experience to use parallel card....

作者: cytnet 時間: 2011-12-21 17:55
我隻電變可以去到12v

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)