Switch ON the transmitter, set the throttle trim to neutral.
[size=7.000000pt]Set the transmitter throttle position at the neutral.
[size=7.000000pt]Turn ON the speed controller switch, the speed controller LED should come ON afterward.
[size=7.000000pt]Press ‘SET button’ on the speed controller.
[size=7.000000pt]Do NOT move the transmitter throttle position.
[size=7.000000pt]After 2 seconds, LED will turn OFF to indicate the
[size=7.000000pt]neutral position has been saved.
[size=7.000000pt]Within the following three seconds, move the throttle to both directions of maximum
[size=7.000000pt]forward and brake position. Return the throttle back to the neutral position, wait until LED
[size=7.000000pt]lights up.
[size=7.000000pt]You can check the proper adjustment by watching the LED, it turns ON at neutral, full
[size=7.000000pt]throttle and full brake position.
