RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Tamiya 就出三節棍~ [打印本頁]

作者: lung1 時間: 2012-2-6 23:58
標題: Tamiya 就出三節棍~
Announced at Nürnberg:

[TRF] 44mm Double Cardan Joint Shaft (2pcs.)
[TRF] Drive Shaft for 44mm Double Cardan Joint Shaft (2pcs.)
[TRF] Axle Shaft for Double Cardan Joint Shaft (2pcs.)
[TRF] Joint Casing for Double Cardan Joint Shaft (2pcs.)
[TRF] 1050 Ball Bearing (3mm Thick, 2pcs.)
[TRF] Cross Joint for Double Cardan Joint Shaft

作者: tiger1 時間: 2012-2-7 08:37
double joint 三節棍 shaft, nice wor

作者: arto6 時間: 2012-2-7 08:55
莫非又係SPEC. R OEM??

作者: defcone 時間: 2012-2-7 09:42
from the photos on redrc, looks like Roche oem

作者: rcracing 時間: 2012-2-7 12:44

defcone 發表於 2012-2-7 09:42

登錄/註冊後可看大圖

from the photos on redrc, looks like Roche oem

Roche????佢地做厂???味講笑.....................
佢都係貼牌唔係生产!!

作者: defcone 時間: 2012-2-7 12:47

rcracing 發表於 2012-2-7 12:44

登錄/註冊後可看大圖

Roche????佢地做厂???味講笑.....................
佢都係貼牌唔係生产!!

ok, I didn't know that. let me rephrase, from the photos on redrc, looks as if they are the same as the ones that Roche are going to be releasing.

作者: rcracing 時間: 2012-2-7 12:56

defcone 發表於 2012-2-7 12:47

登錄/註冊後可看大圖

ok, I didn't know that. let me rephrase, from the photos on redrc, looks as if they are the same a ...

其實九成牌子都係貼牌多,所以大家Ｄ外型有畤一模一樣.............

作者: EC5WVR4PRO4 時間: 2012-2-7 23:33

rcracing 發表於 2012-2-7 12:44

登錄/註冊後可看大圖

Roche????佢地做厂???味講笑.....................
佢都係貼牌唔係生产!!

有時有啲嘢唔係咁清楚就唔好以為自己知道一清二楚,商業上嘅嘢,莫非師兄係所有品牌嘅唯一生產商...咪講笑啦

作者: rcracing 時間: 2012-2-8 10:27

EC5WVR4PRO4 發表於 2012-2-7 23:33

登錄/註冊後可看大圖

有時有啲嘢唔係咁清楚就唔好以為自己知道一清二楚,商業上嘅嘢,莫非師兄係所有品 ...

哦...................咁Roche個老细我識佢十幾年啫...............莫非師兄係???

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)