RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: T2R vs TA05+TRF dampers [打印本頁]

作者: GigaRacer    時間: 2006-10-11 14:30
標題: T2R vs TA05+TRF dampers
T2R US$220
TA05  US$159 + TRF dampers US$60

So, they are about the same price, but can anyone help me to confirm if the T2R dampers are metal or plastic?  Some said metal, and some said plastic?  

T2R better quality, better car
TA05 lot of parts, lots of hop-up (mean more $$ to spend?)
作者: Ivan    時間: 2006-10-11 14:42
No doubt, T2R
作者: binary    時間: 2006-10-11 14:57
原帖由 GigaRacer 於 2006-10-11 14:30 發表
T2R US$220
TA05  US$159 + TRF dampers US$60

So, they are about the same price, but can anyone help me to confirm if the T2R dampers are metal or plastic?  Some said metal, and some said plasti ...


T2R uses plastic damper, but it's externally adjustable....  good enough to be used in Pro-level touring car.

I vote for T2R !!!
作者: klth    時間: 2006-10-11 15:33
原帖由 GigaRacer 於 2006-10-11 14:30 發表
T2R US$220
TA05  US$159 + TRF dampers US$60

So, they are about the same price, but can anyone help me to confirm if the T2R dampers are metal or plastic?  Some said metal, and some said plasti ...



Go to http://www.teamxray.com/ to have a look! lots of information

The shock body is plastic while the cap and adjusting collar are alu.
作者: zoozoo    時間: 2006-10-12 00:04
我睇好T2R,不过就算加埋TRF dampers TA05都唔够T2R贵WO,仲有T2R好像系无外壳,加埋价钱都差唔少
作者: GigaRacer    時間: 2006-10-12 09:02
原帖由 zoozoo 於 2006-10-11 08:04 發表
我睇好T2R,不过就算加埋TRF dampers TA05都唔够T2R贵WO,仲有T2R好像系无外壳,加埋价钱都差唔少



Price update (California)
T2R  US$199 backorder now, no one has it + body $20?
TA05 US$135 + TRF dampers $48


You are right, TA05+TRF is about US$36 cheaper...., and no need to wait..  
作者: GigaRacer    時間: 2006-10-13 08:41
Still 15/16....

TA05
- haven't own a Tamiya car for a long time, but Tamiya... too much plastic
- run on the street maybe better
- more parts available
- since I am not upgrading my TX or ESC

T2R
- less and expensive parts
- but much nicer car
- so nice that I feel I need to upgrade everything else


作者: GigaRacer    時間: 2006-10-14 14:48
I want to know AMAT's vote.  AMAT Sir, are you there?

I am more toward TA05 now.....  
作者: GigaRacer    時間: 2006-11-4 02:43
Finally bought a FXX TA05!!!!!   
作者: Jimmyso    時間: 2006-11-4 18:09
原帖由 GigaRacer 於 2006-11-4 02:43 發表
Finally bought a FXX TA05!!!!!   


Thank you !!!
作者: GigaRacer    時間: 2006-11-5 14:49
原帖由 Jimmyso 於 2006-11-4 02:09 發表


Thank you !!!



???
作者: chasegtruck    時間: 2006-11-6 19:22
TA-05好控la~
作者: ALEXANDER    時間: 2006-11-7 00:02
原帖由 GigaRacer 於 5/11/2006 02:49 PM 發表



???


作者: AMAT    時間: 2006-11-7 00:05
原帖由 GigaRacer 於 2006-10-14 14:48 發表
I want to know AMAT's vote.  AMAT Sir, are you there?

I am more toward TA05 now.....  


T2R好O的掛.....哈!
作者: GigaRacer    時間: 2006-11-7 02:07
原帖由 AMAT 於 2006-11-6 08:05 發表


T2R好O的掛.....哈!



Wahh, only now you said so?  What are you going to do with your 3 TA05?  Put them under the bed?  

Well, but T2R still in shortage.  
作者: jontang001    時間: 2006-11-7 18:24
I think that TA05 with some upgrades can easy to get good lap seconds than T2R by same driver. Because TA05 has its good characteristic than T2R...this is only my experience!!!
作者: GigaRacer    時間: 2006-11-8 02:39
原帖由 jontang001 於 2006-11-7 02:24 發表
I think that TA05 with some upgrades can easy to get good lap seconds than T2R by same driver. Because TA05 has its good characteristic than T2R...this is only my experience!!!



Nice to hear that!!     What do you suggest to change?
作者: lolman    時間: 2006-11-8 03:09
For Drift ... I vote TA05

For Touring ... I vote T2R
作者: jontang001    時間: 2006-11-8 11:04
TRF damper is the necessary.
Carbon mixed chassis, body set and Ti screw or Al screw are for lose weight. But new arm or the older one (414 used) is the option for different course or driving custom. And others like stabilizer and wheel axial are for improve corner speed.
I use BD for out door race and TA05 for in door carpet course.
After all, I think TA05 is fun for race!!!
作者: GigaRacer    時間: 2006-11-8 15:24
原帖由 jontang001 於 2006-11-7 19:04 發表
TRF damper is the necessary.
Carbon mixed chassis, body set and Ti screw or Al screw are for lose weight. But new arm or the older one (414 used) is the option for different course or driving cust ...



Interesting... indoor carpet race?  Where?  Which state?  Can you post your TA05 here?
作者: AMAT    時間: 2006-11-8 15:26
原帖由 GigaRacer 於 2006-11-7 02:07 發表



Wahh, only now you said so?  What are you going to do with your 3 TA05?  Put them under the bed?  

Well, but T2R still in shortage.  


好O的唔等如我會買唧......哈!兩回事嚟!

TA05.....我不嬲都係得一架係要嚟玩,另外果兩架應該都係景品嚟....哈哈!
作者: jontang001    時間: 2006-11-9 01:31
This is my TA05. I think the drewback of TA05 is its weight. So my TA05 equiped with Ti wheel axie, screw and Al screw. When it equiped with new short 415 arm, it weight is 1338g without cell and wheels. That means when you put those on, full weight is about 1535g. Maybe this number is some kind of joke for others, but for TA05 maybe reached its limit.

作者: 清清    時間: 2006-11-9 01:45
如果話TA-05好0既朋友,我話你知你玩車叻極有限
作者: jontang001    時間: 2006-11-9 01:47
This is the other side. I love TA05 because its special characteristic...position of the motor is near the center of car. According my experience, the corner speed is easy to get higher when it out of the apex, especially on carpet course. Another thing, it is not good enough for drift...why? The motor position is too near center that make you tough to control your tail...too fast!!!
By the way...I am not at HK now.

作者: jontang001    時間: 2006-11-9 02:04
This is with 414 arm...the old type arm. Because old arm was too heavy and some reason I need Al upright (made by square)...I pull down stabilizers and its seat. It was 1353g without heatsink, wheels and cell. But It still feeled good handling and head direction!!!

作者: jontang001    時間: 2006-11-9 02:25
Maybe I talked too much, but many people think that TA05 is not suitable for TC racing. Yes, I agree with that. But after losing weight and upgrade...it is full of fun and attackable!!! I always use TA05 on 23T carpet race...because in outdoor asphalt course...it is too heavy when accelerate.
My YOKOMO BD is faster than TA05 0.5 second per circle at big outdoor course. But at carpet...TA05 is faster than BD 0.2~0.3 pre circle. Maybe all indoor carpet course are smaller which full with sharp corner and less straight...

[ 本帖最後由 jontang001 於 2006-11-9 02:33 編輯 ]

作者: GigaRacer    時間: 2006-11-9 02:57
原帖由 清清 於 2006-11-8 09:45 發表
如果話TA-05好0既朋友,我話你知你玩車叻極有限



好 inch

Of course, there are many cars better than TA05, and there are many cars better than your WRX/STI..... so?
作者: ming    時間: 2006-11-9 03:30
標題: 回復 #28 GigaRacer 的帖子
唔洗扯火喎師兄!自己覺得架車好咪得囉,玩得叻又如何!又搵唔到食嘅
作者: GigaRacer    時間: 2006-11-9 08:26
原帖由 ming 於 2006-11-8 11:30 發表
唔洗扯火喎師兄!自己覺得架車好咪得囉,玩得叻又如何!又搵唔到食嘅



Play RC, no need to be "inch".  I could have say, "live in 屯門, 又有幾叻o牙"  You play an expensive RC car doesn't mean you 叻.  Just that because you pay less rent or mortgage.  I don't mean to attack you, but everyone is different in terms of value.  Anyway, "inch" is a very bad attitude.  
作者: kaho0338    時間: 2006-11-9 16:17
i vote ta-05 , u need to know xray parts is too expensive...

if i have money afford xray and the parts, i will buy 415msx / tb05
作者: Ivan    時間: 2006-11-9 16:29
In my opinion, compare with the other brand, the durability of the Xray parts is much higher than the others.
作者: ming    時間: 2006-11-10 02:50
標題: 回復 #30 GigaRacer 的帖子
朋友......先乜咁在意丫,人地鐘意點講咪點講囉,留番啖氣暖下肚咪仲好
作者: calvin1016    時間: 2007-2-4 00:42
原帖由 清清 於 2006-11-9 01:45 發表
如果話TA-05好0既朋友,我話你知你玩車叻極有限



好既定義係乜,  視符你用咩角度!
作者: RX78amuroray    時間: 2007-3-11 04:07
TA-05 玩白皮豬或23T 都幾好
飛街都冇咁肉赤




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2