RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區
標題: Edam Espirit 玩後感? [打印本頁]
作者: joesample 時間: 2012-2-24 16:17
標題: Edam Espirit 玩後感?
請問有沒有CHing可以分享他們對 Edam Espirit 的看法 or 玩後感?
http://www.edam.com.tw/shopping_view.asp?sn=885
Thanks.
作者: iouand 時間: 2012-2-25 00:44
架車我都好LlKE，但唔知d膠料得唔得!車價師兄你知唔知幾$?
如貴到二千尾，我就唔諗啦!
作者: jf813 時間: 2012-2-25 11:24
膠料 very very good, as they design it for much heavier nitro car. As mine is the 220mm model it handle more like nitro cars than electric cars. And I usually play at nitro track. 
作者: iouand 時間: 2012-2-25 12:34
it handle more like nitro cars than electric cars<---呢句好吸引
請問CHING架車什麼價位??
作者: rcracing 時間: 2012-2-25 13:09
E架係220mm平跑唔同190mm touring玩法!!
價錢問佢:-
http://bbs.rc-evo.com/forum.php?mod=forumdisplay&fid=131
作者: joesample 時間: 2012-2-25 14:58
本帖最後由 joesample 於 2012-2-25 14:59 編輯
But some C-hing said it is slow in corner, if we use it to race in JV, it will be a slow car, anyone agree/ disagree with this statement?
作者: joesample 時間: 2012-2-25 15:00
Also, is it easy to find replacement parts for it?
作者: iouand 時間: 2012-2-25 16:23
rcracing 發表於 2012-2-25 13:09
E架係220mm平跑唔同190mm touring玩法!!
價錢問佢:-
http://bbs.rc-evo.com/forum.php?mod=forumdisplay& ...
Thanks!ching但想問下呢架車唔係一雞兩味架?如只得220就麻煩d!
作者: joesample 時間: 2012-2-25 18:04
一雞兩味 ok, the car can be setup as 190mm to 220mm (but conversion kit is required)
作者: iouand 時間: 2012-2-25 19:01
問過喇！$28XX，唉！有d心理障礙添，咁既＄＄買架MlT，
作者: gtimax 時間: 2012-2-25 22:47
呢個價算啦.........
作者: cytnet 時間: 2012-2-26 00:21
本帖最後由 cytnet 於 2012-2-26 00:24 編輯
我本身都有呢部車既
我覺得佢做得唔錯丫
我新手都玩得好開心,而且佢強度唔錯我幾次炒到飛埋牆都冇事(個車瞉爆左而車架冇事)
2800左右我覺得ok
我鍾意玩佢多個玩我另一部t3
以上內容全為個人意見不喜勿插
作者: cytnet 時間: 2012-2-26 00:25
呢部車零件可以去13/f 或健x買
作者: joesample 時間: 2012-2-26 01:46
感謝Cytnet Ching意見. 請問零件是貴不貴？ For example, how much is the 向萬, 底板, 皮帶?
And Cytnet Ching, do you feel that your T3 runs faster than the Espirit in corner? (especially in U turn?)
作者: cytnet 時間: 2012-2-26 08:38
零件貴唔貴呢個問題，我相信貴唔過T3,但我可以好肯定話你知如果佢同t3相撞，散既係T3,我T3同佢都行3‧5T速度差唔多
作者: joesample 時間: 2012-2-26 15:17
請問Espirit 跟mugen /kyosho 油車的parts 可以互用嗎?
作者: paperlong 時間: 2012-2-26 16:41
經過紅昇見到 白色盒 ok靚
作者: cytnet 時間: 2012-2-26 19:38
相信唔得......
作者: cytnet 時間: 2012-2-26 19:39
乜紅猩都有賣咩0.0冇留意到
作者: cytnet 時間: 2012-2-26 19:40
大減可以和t3共用
作者: babybert 時間: 2012-2-27 10:40
大減可以和t3共用?
Good wor... didn't know.
作者: cytnet 時間: 2012-2-27 11:38
係呀，我都係買T3既用
作者: joesample 時間: 2012-2-27 12:55
Hi cytnet CHing, are you playing 220mm or 190mm? Foam Tire or Rubber Tire?
作者: cytnet 時間: 2012-2-27 13:53
190mm同玩膠呔
作者: cytnet 時間: 2012-2-27 13:55
我打算玩平路車殼
作者: gtimax 時間: 2012-2-29 00:36
跑膠胎會推頭甩尾,因行波子搖臂是不適合膠胎的,十年前xray T1 試過失敗左,要超加C坐懸掛補獲.....
佢設計係跑棉胎既,咪跑棉胎啦,唔好玩特別,
我上次比哩款車拍一拍,我部散咁滯,以後見倒都唔敢放部車落去....
車係要黎跑,唔係要黎撞既.
作者: prado3989 時間: 2012-2-29 10:07
回復 jf813 的帖子
我架車甩尾,請問頭尾牙差用幾多度油?有冇其他setting分享下?Thz!
作者: prado3989 時間: 2012-2-29 10:09
回復 cytnet 的帖子
我架車甩尾,請問頭尾牙差用幾多度油?有冇其他setting分享下?Thz!
作者: cytnet 時間: 2012-2-29 10:18
尾我用5000度
作者: cytnet 時間: 2012-2-29 10:21
本帖最後由 cytnet 於 2012-2-29 10:22 編輯
頭我用50000度（冇記錯既話）推頭唔覺得嚴重，轉ok靈活，我覺得玩得玩開心
作者: cytnet 時間: 2012-2-29 10:26
車尾我用上面個粒（有三點果度呢）
作者: prado3989 時間: 2012-2-29 10:30
回復 cytnet 的帖子
THZ先!
車尾我用上面個粒（有三點果度呢）唔明---->係唔係油壓板最高個孔?
作者: jf813 時間: 2012-2-29 10:49
回復 prado3989 的帖子
I use front 500K, rear 1K and it push a lot...... But very very stable. Maybe because mine is a 220mm with rear wide rear foam tires. Think I need to try setting similar to nitro car setup. Front one way and rear solid. but the issue is front oneway is not out yet..... The Spirit oneway will not work as the oneway is turning at wrong direction....... Edam, please make a front oneway if you see this. hehe.
作者: prado3989 時間: 2012-2-29 11:01
回復 jf813 的帖子
Thanks for your sharing.
我買車係跟touring kid,另跟一套220mm VDS kit.我用佢原廠黎個touring setting試佐先,發覺好甩.
我下次換佐牙差油再試.Thz!
作者: cytnet 時間: 2012-2-29 11:14
你用幾多度呔
作者: cytnet 時間: 2012-2-29 11:14
今日咁凍最好用綿呔
作者: prado3989 時間: 2012-2-29 11:18
回復 cytnet 的帖子
唔係呢兩日,係上個月試.係用綿呔.呢個月試玩油車中.
作者: joesample 時間: 2012-3-1 22:46
有冇Ching試過用3cell lipo 玩Edam espirit？
作者: cytnet 時間: 2012-3-2 11:21
用GTB電變？
作者: joesample 時間: 2012-3-2 16:00
I checked with some Japanese guys who use 3Cell on their Edam, they are using HobbyWing 120A to power up the 3Cell battery. So I guess both HobbyWing 120A or SpeedPassion 120A ESC will work.
作者: joesample 時間: 2012-3-2 16:36
Edam released the front spool axial: http://www.bignuts.jp/?pid=40371866
作者: cytnet 時間: 2012-3-3 22:21
等待好天氣試玩
