RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: XRAY係幾靚仔O既.... [打印本頁]

作者: AMAT    時間: 2006-10-24 00:42
標題: XRAY係幾靚仔O既....
第一次叫做攞O架XRAY車上手睇......NOT MIND....幫個內地版友交收咁大把....哈!

係幾靚仔O既,部份設計真係幾正.....尤其係果個頭單....幾種變化.....幾搞O野.....

宜家趁仲係我手上,研究下先....睇下有咩地方好要嚟改善下O架KOG先....聽日就要寄俾人囉.....哈!

至於問我會唔會買XRAY呢?唔會買囉~!哈!

作者: skylam    時間: 2006-10-24 01:16
waaaaaaa好補o下wor部車
作者: AMAT    時間: 2006-10-24 01:19
原帖由 skylam 於 2006-10-24 01:16 發表
waaaaaaa好補o下wor部車


I DONT KNOW,部車唔係我.....睇完結構係幾靚....補唔補就冇乜深究喇.....哈!
作者: skylam    時間: 2006-10-24 03:41
d motor saver, 金屬轉向, 頭尾roll bar, carbon電壓架件件都係貴野...黎d野加埋都成千幾
作者: 教主    時間: 2006-10-24 04:00
Xray is a good car ; downside is lack of spare parts - in HK  
作者: zoozoo    時間: 2006-10-24 12:17
全OP?
作者: gary    時間: 2006-10-24 12:32
以前就話咁多金屬件唔好.宜家就架架都好似GPM 咁,咁係GPM創先河定的佢地跟風呢???
作者: Timothypychan    時間: 2006-10-24 12:37
原帖由 zoozoo 於 2006-10-24 12:17 發表
全OP?


仲有金屬C座未上. 睇個盒, 架車最多四五個月車. OPTION加起一定超過二千.
作者: Chrispo    時間: 2006-10-24 13:10
原帖由 教主 於 2006-10-24 04:00 發表
Xray is a good car ; downside is lack of spare parts - in HK  


Lacking spare parts is true, yet it's quite durable and even with hard impact, you won't find it damaged seriously.
作者: Chrispo    時間: 2006-10-24 13:10
原帖由 教主 於 2006-10-24 04:00 發表
Xray is a good car ; downside is lack of spare parts - in HK  


Lacking spare parts is true, yet it's quite durable and even with hard impact, you won't find it damaged seriously.
作者: AMAT    時間: 2006-10-24 13:58
原帖由 skylam 於 2006-10-24 03:41 發表
d motor saver, 金屬轉向, 頭尾roll bar, carbon電壓架件件都係貴野...黎d野加埋都成千幾


係咩?乜咁正O架!?哈!
作者: AMAT    時間: 2006-10-24 14:07
原帖由 Timothypychan 於 2006-10-24 12:37 發表


仲有金屬C座未上. 睇個盒, 架車最多四五個月車. OPTION加起一定超過二千.


乜原來咁筍O架!?我都唔知添~!哈!
作者: superxc007    時間: 2006-10-29 12:18
標題: 几钱啊?
几钱啊?
作者: klth    時間: 2006-10-29 13:02
原帖由 Chrispo 於 2006-10-24 13:10 發表


Lacking spare parts is true, yet it's quite durable and even with hard impact, you won't find it damaged seriously.



I dont think there is an issue in lacking of spare parts in HK..
But i do agree that there are not many shops providing support on spare parts in HK!
作者: evo2005    時間: 2006-10-29 14:16
尼排都好多師兄放T2喎!!唔通007就嚟返貨??
作者: klth    時間: 2006-10-29 14:23
原帖由 evo2005 於 2006-10-29 14:16 發表
尼排都好多師兄放T2喎!!唔通007就嚟返貨??


I think that this is a common phenomenon that tons of model will appear in the ebay or other source of selling forums when the manufacturers announce to release a new model!

Yep! 007 is out and i think shops in HK will be soon in stock! It is a great news for Xray fan!




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2