RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 全改ta05 [打印本頁]

作者: chan_ka_Lung 時間: 2006-10-27 22:29
標題: 全改ta05
hello,第一次發貼,正改ta05 ,3 racing 炭板,金屬前後波箱,金屬中波箱,頭單,carbon前後油壓,金屬c座,金屬轉向,4個金屬前後臂碼,tamiya金屬油壓,金屬轉向碼,Tamiya blue带,前萬向,前後桿,正搞搞成會post photo

作者: chan_ka_Lung 時間: 2006-10-27 22:37
please note the price is lower than TB5,
also including parts.......... no list above
hope i can finish it asap.

作者: chan_ka_Lung 時間: 2006-10-27 23:13
anyone can tell me where i can play. i live in hk island. where i can play? thks.

作者: soilderman83 時間: 2006-10-27 23:48

原帖由 chan_ka_Lung 於 2006-10-27 23:13 發表
anyone can tell me where i can play. i live in hk island. where i can play? thks.

If you have Private car you can consider PYC(Sheung Shui) or TC(Yuen Long)

作者: AMAT 時間: 2006-10-27 23:57

原帖由 chan_ka_Lung 於 2006-10-27 23:13 發表
anyone can tell me where i can play. i live in hk island. where i can play? thks.

香港島得一個RC場,係灣仔天橋底,近紅隧出入口果堆天橋下面.

但油份極多......相信你O架全改TA05會變泥鴨.

有車就梗係去O的PYC呀,TC之類啦.....

冇的話,咪搵下有冇O的籃球場呀,足球場呀,晚上放下狗囉.....

作者: rsx 時間: 2006-10-28 00:05
Hello Bro. Chan_Ka_Lung,

Cheaper than TB5? Would you mind list out the cost for each option? I'm very interested to know the cost. It seems quite attractive.

原帖由 chan_ka_Lung 於 2006-10-27 22:37 發表
please note the price is lower than TB5,
also including parts.......... no list above
hope i can finish it asap.

作者: 毒魚 時間: 2006-10-28 00:11

原帖由 AMAT 於 2006/10/27, 23:57 發表

香港島得一個RC場,係灣仔天橋底,近紅隧出入口果堆天橋下面.

但油份極多......相信你O架全改TA05會變泥鴨.

有車就梗係去O的PYC呀,TC之類啦.....

冇的話,咪搵下有冇O的籃球場呀,足球場呀,晚上放下狗 ...

但沒油比有油更冼啊= ="

用gpm出的綿胎叫做比較好d

作者: SpeedhunterHK 時間: 2006-10-28 04:42
標題: 回復 #3 chan_ka_Lung 的帖子
Where about do u live in HK island.
I have a TA05 N i live in HK island as well.

作者: petscan 時間: 2006-10-28 09:47
標題: 回復 #8 SpeedhunterHK 的帖子
I don't think 全改 ta05 will be cheaper than TB evo 5.

Now TB evo 5 only cost HK$2400, and it is almost full option. Also 415 MSX MRE cost around HK$3000.
I also have a Ta05. I just 半改 (no 3 racing 炭板,金屬前後波箱, etc) and it already cost more than HK$3000. Unless you got a HUGE discount on 3 racing part, I will go for 415 MSX MRE

作者: chan_ka_Lung 時間: 2006-10-28 22:03
hello all, thanks all
if you use all Tamiya original part, the car will very expensive.
Recent, i find some part in TOPXXX, the part is cheaper than original part. the price of TOPXXX is around half price .please go to KWS see...see...
I will use some part which is buy from topXXX. The part quality is good. Not bad compare with Tamiya original. I will try best to finish asap and photo to every one.
now, i really use the money less than tb5.

作者: chan_ka_Lung 時間: 2006-10-28 22:04
西環

作者: chan_ka_Lung 時間: 2006-10-28 22:09
Now i think use TA05 to make the 炭板 professsional car is better. It is beacuse i will have more plastic replacement part on hand.

作者: chan_ka_Lung 時間: 2006-10-28 22:14
i don't know why. If i buy any part, i will search where is the cheaper part?
金屬頭單有一間是最平的...please go to fins in KWS. please note it is Tamiya original part, not 3 racing.

作者: chan_ka_Lung 時間: 2006-10-28 22:15
if buy more, we can ask for cheaper price MA.....

作者: chan_ka_Lung 時間: 2006-10-28 22:36
Recently searching, around 3-4 company in KWS has cheasper part for ta05 option part. so i buy all part in these 3-4 cmpany.

作者: chan_ka_Lung 時間: 2006-10-28 22:38
hope can help all ta05 fans...........

作者: soilderman83 時間: 2006-10-28 23:33

原帖由 petscan 於 2006-10-28 09:47 發表
I don't think 全改 ta05 will be cheaper than TB evo 5.

Now TB evo 5 only cost HK$2400, and it is almost full option. Also 415 MSX MRE cost around HK$3000.
I also have a Ta05. I just 半改 (no 3 ...

agree

作者: soilderman83 時間: 2006-10-28 23:35

原帖由 chan_ka_Lung 於 2006-10-28 22:03 發表
hello all, thanks all
if you use all Tamiya original part, the car will very expensive.
Recent, i find some part in TOPXXX, the part is cheaper than original part. the price of TOPXXX is around h ...

Please don't mind, In my opinion, TOPxxx part is not good!

作者: SPOONACCORD 時間: 2006-10-28 23:43
ｔａ－０５唔好大改啦～～

作者: chan_ka_Lung 時間: 2006-10-28 23:54
標題: 回復 #18 soilderman83 的帖子
thanks fo your comment....maybe....but i don't know still now...need to test it later.....but at this time...i feel 堅硬度, 精密度, weight seem not bad than tamiya original....
Now, I have about half tamiya original part use.

作者: chan_ka_Lung 時間: 2006-10-29 00:02
標題: 回復 #19 SPOONACCORD 的帖子
原本我是不想改太多....但既然已buy ta05,不想掉下ta05, 既然玩得rc car,個個都想是最好. 一是不buy 不玩....不知同意嗎

作者: chan_ka_Lung 時間: 2006-10-29 00:16
when buy the second car (first is tt01), i think which one i need to buy with a long time? (415MSX, TB5, TA05) If 415MSX seem some expensive, (need to take 3K money at one time.). if tb5, it is cheaper and more option part is in this car, but my first car is tt01, i don't want to play this type of transmission, moreover, i know 皮帶is most popular now. so...ta05...

作者: sunday 時間: 2006-10-29 00:30
可以參考下

: 登錄/註冊後可看大圖

作者: minimini 時間: 2006-10-29 00:39

原帖由 chan_ka_Lung 於 2006-10-28 22:03 發表
hello all, thanks all
if you use all Tamiya original part, the car will very expensive.
Recent, i find some part in TOPXXX, the part is cheaper than original part. the price of TOPXXX is around h ...

try not to use those TOPXXX parts.......it will lower your car's performance........also will down-grade your car's value.......

........trust me.......buy the Japanese brands........it really worths........

[ 本帖最後由 minimini 於 2006-10-29 00:41 編輯 ]

作者: petscan 時間: 2006-10-29 16:02

原帖由 chan_ka_Lung 於 2006-10-28 22:09 發表
Now i think use TA05 to make the 炭板 professsional car is better. It is beacuse i will have more plastic replacement part on hand.

However, 炭板 professsional car is more easy to bend or even break if you have a serious accident. But if you use the TA05 plastic tub, it is built like a tank and it will not break and you do not need to repair or replace it even after repeated seriouc accidents. I am using both TB evo 5 and TA 05 and it is my own personal experience.

作者: 中遠 時間: 2006-10-29 16:11
裝到今既料，可以跑得既。。。

作者: chan_ka_Lung 時間: 2006-10-29 22:02
thanks for all useful information.
The car is finished just now. But i do not know how to upload the photo.
堅硬度, 精密度seem good,no滑 tooth in 金屬 part ,頭c座轉向杯.
3 racing part also beautiful.

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: kinbe 時間: 2006-10-29 23:56
TN-racing

: 登錄/註冊後可看大圖

作者: chan_ka_Lung 時間: 2006-10-30 02:30
my car

: 登錄/註冊後可看大圖

作者: chan_ka_Lung 時間: 2006-10-30 02:33
my car2

: 登錄/註冊後可看大圖

作者: petscan 時間: 2006-10-31 21:53
標題: 回復 #30 chan_ka_Lung 的帖子
Your car is quite beautiful. How much did it cost altogether ? Is the performance good ?

作者: chan_ka_Lung 時間: 2006-10-31 22:41
Hello.........no actual calculate. around 2.3k-2.4k if not include oil bumper.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)