RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Tamiya SRB (Rough rider) highly modified [打印本頁]

作者: tiger1 時間: 2012-7-15 22:46
標題: Tamiya SRB (Rough rider) highly modified
本帖最後由 tiger1 於 2012-7-23 17:35 編輯

This one was an SRB Rough rider I got back in 1998 as a new built model. Then I added a custom chassis 3mm sandwich carbon fiber (super stiff), RCH front suspension arms, MIP trailing rear arms with its very rare CVDs/shafts, Thorp differential, machined down tranny, widened front end using carbon fibre tubes, mini servo with metal gears from Germany, mini receiver, JG roll cage, Yokomo titanium turnbuckles, MRP body, CRP wing,CRP bumper, RC10 battery cups, custom made rear gearbox underprotector, cut down dirt burner wing, Kyosho optima series motor slipper clutch bell ......

作者: rcworldhk 時間: 2012-7-15 23:03

tiger1 發表於 2012-7-15 22:46

登錄/註冊後可看大圖

This one was an SRB Rough rider I got back in 1998 as a new built model. Then I added a custom chass ...

Nice car and nice body

作者: cfchung 時間: 2012-7-15 23:05
and nice option parts!

作者: cfchung 時間: 2012-7-15 23:11
But I wonder that the rear arms are strong enough??

作者: v8yw2 時間: 2012-7-16 00:50
cool 我喜歡後懸吊

作者: tiger1 時間: 2012-7-16 06:31

cfchung 發表於 2012-7-15 23:11

登錄/註冊後可看大圖

But I wonder that the rear arms are strong enough??

These MIP arms are never known for strength, as a matter of fact, most trailing arm designs are not known for strength. Therefore I used custom 3mm carbon plate rather than the original FRP.

作者: tiger1 時間: 2012-7-16 06:31

v8yw2 發表於 2012-7-16 00:50

登錄/註冊後可看大圖

cool 我喜歡後懸吊

Me too

I especially like the rear shafts, very very unique, never to be seen in RC after

作者: rodmanwing 時間: 2012-7-17 17:59
so good

作者: hihizaza 時間: 2012-7-17 20:58
條萬向好古怪喎！比近鏡睇睇

作者: fat_fat_cat 時間: 2012-7-17 22:44

hihizaza 發表於 2012-7-17 20:58

登錄/註冊後可看大圖

條萬向好古怪喎！比近鏡睇睇

just a fiber disc, we still use a lot in industries purpose, but no in hobby any more.

作者: fat_fat_cat 時間: 2012-7-17 22:49
[attach]641101[/attach]these is mine
IMG_8056.JPG

作者: tiger1 時間: 2012-7-17 23:03

fat_fat_cat 發表於 2012-7-17 22:44

登錄/註冊後可看大圖

just a fiber disc, we still use a lot in industries purpose, but no in hobby any more.

can you show a similar industrial sample? What is the application??

作者: tiger1 時間: 2012-7-17 23:03
車臂是 RCH

作者: fat_fat_cat 時間: 2012-7-17 23:14
just connect to a motor to anti vibration

i will try to found a pix later

作者: tiger1 時間: 2012-7-18 00:32
RCH 乃差不多三十年老嘢，執咗好耐，至少二十年啦。

作者: fat_fat_cat 時間: 2012-7-18 01:04
[attach]641155[/attach][attach]641155[/attach]
will these see better?

作者: tiger1 時間: 2012-7-18 07:05
thanks for the photo

作者: lcpvcce 時間: 2012-7-23 17:28
Jealous is not the word!! ...................

作者: tiger1 時間: 2012-7-23 17:34
師兄客氣鳥

作者: exo_oni 時間: 2012-7-24 13:16
好令人懷念的RC呀 THX!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)