RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 811e gear box problem [打印本頁]

作者: RCANDY 時間: 2012-9-14 17:14
標題: 811e gear box problem
I follow the manual to insert the shims in the diff. but I found the gear box is really tight and the gear is not smooth as well.
Shouldn't I not follow the instruction manual or not

作者: RCANDY 時間: 2012-9-14 19:14
本帖最後由 RCANDY 於 2012-9-14 19:17 編輯

跟說明書指示放入介子響前後差速，發覺好緊同D齒輪極不暢順，會否不跟指示做才好，請各位司兄指教一下，多謝灑

作者: joe2004 時間: 2012-9-14 19:36
果隻介子要加嫁。會否內大傘齒坐得唔夠入呀？

作者: manfail1122 時間: 2012-9-14 19:54

跟說明書指示放入介子響前後差速

複製代碼

你唔加你個O-RING想成日換, 玩一次換一次

作者: RCANDY 時間: 2012-9-14 20:42

joe2004 發表於 2012-9-14 19:36
果隻介子要加嫁。會否內大傘齒坐得唔夠入呀？

可能係，等我再做多一次

作者: turbo997 時間: 2012-9-14 23:44
I suggest don't use any shim first!

作者: wingfto 時間: 2012-9-15 00:38

turbo997 發表於 2012-9-14 23:44

登錄/註冊後可看大圖

I suggest don't use any shim first!

you should try.

作者: RCANDY 時間: 2012-9-15 01:05
I see, thx c hing I'll try this first

作者: benlau 時間: 2012-9-17 22:14

RCANDY 發表於 2012-9-15 01:05

登錄/註冊後可看大圖

I see, thx c hing I'll try this first

攪掂未呀？

作者: RCANDY 時間: 2012-9-18 08:52

benlau 發表於 2012-9-17 22:14

登錄/註冊後可看大圖

攪掂未呀？

ok la, almost finish. Go luck on this Sun race!
see u next Sat

作者: RC_BRYAN_RC 時間: 2012-9-19 21:27

turbo997 發表於 2012-9-14 23:44

登錄/註冊後可看大圖

I suggest don't use any shim first!

I didn't use any shim and mind's works great.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)