RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: HW LCD program box [打印本頁]

作者: tsfai 時間: 2012-10-8 18:51
標題: HW LCD program box
Ching,
When I try to download the USB LINK SOFTWARE from HW website:
Hobbywing_USB_Link_V3.1_setup_120808.rar (MS Windows Version)
I got an unreadable Word document. The program box cannot be connected to the laptop and it just shows the box version when connected.
Do you know how I can get the software corretly? Thanks a lot.

作者: kkchung 時間: 2012-10-8 20:48
先安裝Winrar 用來作 Hobbywing_USB_Link_V3.1_setup_120808.rar 檔案解壓，然後再用解壓出來的安裝檔安裝。

Winrar ：
(32 bit)
http://www.rarlab.com/rar/wrar420tc.exe

(64 bit)
http://www.rarlab.com/rar/winrar-x64-420tc.exe

作者: tsfai 時間: 2012-10-8 21:31

kkchung 發表於 2012-10-8 20:48

登錄/註冊後可看大圖

先安裝Winrar 用來作 Hobbywing_USB_Link_V3.1_setup_120808.rar 檔案解壓，然後再用解壓出來的安裝檔安裝 ...

KK ching.

Thanks a lot. It works now.
My curent LCD box version is V1.07_110119 and I see there is a newer one V1.08_120504.
My esc is Extreme stock. Its FW verion is V3.0_110930STOCK. I don't see V1.08_120504 available for esc. Is it only available after the LCD box is upgraded to V1.08_120504?
Should/can I update both LCD and esc to the newer ones? Thanks.

作者: kkchung 時間: 2012-10-8 22:03
LCD Program Box 和電變各自內裡也有程式。

LCD Program Box 主要分兩系列程式版本 V1.08_120504(2012-05-04) 及 V1.11_120331_V3(2012-03-31)。其中_V3 程式版本尾特別只專用於 XERUN系列 V3後電變，而不相容於其他或之前電變。

V1.07_110119 是老版本LCD Program Box 程式。更新成 V1.08_120504 可支援較新電變程式(PS 不包括XERUN系列 V3 電變)。

Extreme stock 可以用於 V1.08_120504 LCD Program Box 程式。

作者: tsfai 時間: 2012-10-9 11:52
Thanks KK ching. Will give it a try.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)