RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My old Juggernaut Ford F-350 [打印本頁]

作者: edison 時間: 2006-11-15 00:35
標題: My old Juggernaut Ford F-350
with 6years old! but still so cool!

http://www.youtube.com/watch?v=uW3eb-_-ZjQ

作者: soilderman83 時間: 2006-11-15 01:28
Yes,really cool,the performance I feel is better than Ford F350

作者: edison 時間: 2006-11-15 01:33
Ha Ha!!!
I want to modify to Crawler use this car, do you know any conversion kit can do it?

原帖由 soilderman83 於 2006-11-15 01:28 發表
Yes,really cool,the performance I feel is better than Ford F350

作者: edison 時間: 2006-11-15 01:36
Oh Man!

You come from Tuem Mun!! Me too woh!

原帖由 soilderman83 於 2006-11-15 01:28 發表
Yes,really cool,the performance I feel is better than Ford F350

作者: 中遠 時間: 2006-11-15 01:42
保健得幾好。。。

作者: 有勇冇謀 時間: 2006-11-15 02:02
小弟聽到 "格""格"聲, 是否個波箱&頭尾擔掃 o左齒??

作者: 中遠 時間: 2006-11-15 02:05
掃 o左齒就大獲拉。。。

作者: 有勇冇謀 時間: 2006-11-15 02:18

原帖由中遠於 2006-11-15 02:05 發表
掃 o左齒就大獲拉。。。

未必!!!!!!!!!

作者: edison 時間: 2006-11-15 09:54

原帖由 有勇冇謀 於 2006-11-15 02:02 發表
小弟聽到 "格""格"聲, 是否個波箱&頭尾擔掃 o左齒??

果D聲係中波箱老問題 "跳牙"
從新車開始已經係今!

作者: jpmontoya2 時間: 2006-11-15 10:06

原帖由 edison 於 2006-11-15 01:33 發表
Ha Ha!!!
I want to modify to Crawler use this car, do you know any conversion kit can do it?

Its not the best chassis to build as a crawler as far as i understand...

Most of the conversion kit are only for Clod......or DIY TXT-1....

作者: edison 時間: 2006-11-15 11:22
Thanks!

I know My gearbox is same as big TXT, just diff from the suppression.
maybe buy some TXT parts to make conversion!
I very love to see the craze movement on the suppression!!!!

原帖由 jpmontoya2 於 2006-11-15 10:06 發表

Its not the best chassis to build as a crawler as far as i understand...

Most of the conversion kit are only for Clod......or DIY TXT-1....

作者: jpmontoya2 時間: 2006-11-15 11:39

原帖由 edison 於 2006-11-15 11:22 發表
Thanks!

I know My gearbox is same as big TXT, just diff from the suppression.
maybe buy some TXT parts to make conversion!
I very love to see the craze movement on the suppression!!!!

The original TXT is not a great crawler too..so i suggest not to waste money to purchase original TXT-1 part....

Instead,....go with a Clod axle for modification or get the Gmade Spider 2 kit la..

作者: 有勇冇謀 時間: 2006-11-15 12:09

原帖由 edison 於 2006-11-15 09:54 發表

果D聲係中波箱老問題 "跳牙"
從新車開始已經係今!

其實係架車之波箱&頭尾擔設計有問題, 小弟都有一架 jugg1, 但新車落地已聽到 "格格"聲, 在玩不足十排電之情況下, 已掃 o左中波箱&尾擔, 及要換上整套 jugg2 的波箱&擔問題才解決

, 不久之前先 check 到, 原來美國雙星係免費更換由jugg1的波箱&擔 upgrade to jugg2...

, 因小弟已買了 jugg2 作零件車之用.

edison兄, 小弟建議買一套 jugg2 之中波箱&前後擔作 spare 零件之用, 以免將來架車完全行唔到

作者: 中遠 時間: 2006-11-15 13:27
係呀聽講係構造問題。。。

作者: txzmxn 時間: 2006-11-15 14:13

原帖由 有勇冇謀 於 2006-11-15 12:09 PM 發表

其實係架車之波箱&頭尾擔設計有問題, 小弟都有一架 jugg1, 但新車落地已聽到 "格格"聲, 在玩不足十排電之情況下, 已掃 o左中波箱&尾擔, 及要換上整套 jugg2 的波箱&擔問題才解決 , 不久之前先 check 到, 原來美國雙星係免費更換由jugg1的波箱&擔 upgrade to jugg2..., 因小弟已買了 jugg2 作零件車之用.

edison兄, 小弟建議買一套 jugg2 之中波箱&前後擔作 spare 零件之用, 以免將來架車完全行唔到

我都聽過以上問題(好似都係睇工房啲 post), 話呢樣正係 jugg 出左無耐咁快有 jugg2 推出的原因,
星星都好少咁樣 "撻Q", 我諗 txt 無出現呢個問題...

作者: edison 時間: 2006-11-15 15:59
Thanks for your suggestion!

原帖由 jpmontoya2 於 2006-11-15 11:39 發表

The original TXT is not a great crawler too..so i suggest not to waste money to purchase original TXT-1 part....

Instead,....go with a Clod axle for modification or get the Gmade Spider 2 k ...

作者: txzmxn 時間: 2006-11-15 16:01

原帖由 jpmontoya2 於 2006-11-15 11:39 AM 發表

The original TXT is not a great crawler too..so i suggest not to waste money to purchase original TXT-1 part....

Instead,....go with a Clod axle for modification or get the Gmade Spider 2 k ...

甘呢架點睇?

http://forums.radiocontrolzone.com/showthread.php?t=228570

作者: rockdragon 時間: 2006-11-15 16:03
I found a set of chassis converter but it's not a fully crawler. It will come out more like a scale crawler.
Just follow this link .........

http://www.neweramodels.com/cgi-bin/item.cgi?session_id=&part_id=70

登錄/註冊後可看大圖

作者: soilderman83 時間: 2006-11-16 08:52

原帖由 edison 於 2006-11-15 01:36 發表
Oh Man!

You come from Tuem Mun!! Me too woh!

O....It's a good news,Will you join our rc car party on coming friday?
Plase check here
http://bbs.rc-evo.com/viewthread.php?tid=27025&extra=page%3D1
I hope you can come with your car,I really want to see ie,If you join please leave your band,thanks!

[ 本帖最後由 soilderman83 於 2006-11-16 09:02 編輯 ]

作者: edison 時間: 2006-11-19 16:00
Sorry! I'm not in Hongkong of this friday!!!!

I realy want to join!!!

原帖由 soilderman83 於 2006-11-16 08:52 發表

O....It's a good news,Will you join our rc car party on coming friday?
Plase check here
http://bbs.rc-evo.com/viewthread.php?tid=27025&extra=page%3D1
I hope you can come with your car,I re ...

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)