RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 摩打選擇 [打印本頁]

作者: mikeroro    時間: 2013-1-20 18:57
標題: 摩打選擇
本帖最後由 mikeroro 於 2014-1-13 23:50 編輯

..................
作者: allan007_alive    時間: 2013-1-20 19:18
我唔鍾意SP插插吓,硬係覺得插唔實。焊就放心好多。
作者: mikeroro    時間: 2013-1-20 19:25
allan007_alive 發表於 2013-1-20 19:18
我唔鍾意SP插插吓,硬係覺得插唔實。焊就放心好多。

咁姐係買TP好D?
作者: allan007_alive    時間: 2013-1-20 19:29
mikeroro 發表於 2013-1-20 19:25
咁姐係買TP好D?

errr.....,我會。
作者: wingscreamer    時間: 2013-1-20 21:51
LRP...

作者: 965    時間: 2013-1-21 04:08
Is Viper RC popular in HK?  (http://www.viper-rc.com )

I run their 8.5/10.5 and 13.5  quite nice, love them so much since they are the best looking motor/esc on the market, performs pretty much identical to Tekin.. just a bit more sexy looking .. (Esc is cool too! ^_^)
作者: beebone(real)    時間: 2013-1-21 08:06
965 發表於 2013-1-21 04:08
Is Viper RC popular in HK?  (http://www.viper-rc.com )

I run their 8.5/10.5 and 13.5  quite nice,  ...

要美國訂. 摩打麻麻, esc好得
作者: hydrogen9999    時間: 2013-1-21 09:49
和樓上師兄一樣,視乎你想唔想拆來拆去,兩個摩打性能唔差好遠
如果是我反而喜歡SP, 方便拆
作者: defcone    時間: 2013-1-21 10:01
965 發表於 2013-1-21 04:08
Is Viper RC popular in HK?  (http://www.viper-rc.com )

I run their 8.5/10.5 and 13.5  quite nice,  ...

I run them, problem is that if you want to run modified very hard to put a fan on their esc because no mounting holes.
作者: beebone(real)    時間: 2013-1-21 10:11
defcone 發表於 2013-1-21 10:01
I run them, problem is that if you want to run modified very hard to put a fan on their esc becaus ...

Put the fan at the back vertically, or hang it on the upper deck.

作者: defcone    時間: 2013-1-21 10:48
beebone(real) 發表於 2013-1-21 10:11
Put the fan at the back vertically, or hang it on the upper deck.

So ugly, the back vertically is for the motor.
作者: beebone(real)    時間: 2013-1-21 12:17
defcone 發表於 2013-1-21 10:48
So ugly, the back vertically is for the motor.

who care about cosmetic, just care about the temp and speed.
作者: defcone    時間: 2013-1-21 13:14
obviously i care about the aesthetics lol
作者: 965    時間: 2013-1-21 13:41
defcone 發表於 2013-1-21 10:01
I run them, problem is that if you want to run modified very hard to put a fan on their esc becaus ...

I run their factory fan, basically a perfect fit 'box' with a fan on, also leave app. 7mm ace between the esc and fan, still keep the look good, and super effective.... However, added a bit height, and using double side tape, so hard to remove.... (I actually want to take it off now...)

Their motors are ok, not as punchy as their 4 pole motors.. (But sensorless, unless go 40mm 1/8)


作者: defcone    時間: 2013-1-21 15:13
965 發表於 2013-1-21 13:41
I run their factory fan, basically a perfect fit 'box' with a fan on, also leave app. 7mm ace betw ...

This is for 1/8 offroad?
作者: 965    時間: 2013-1-21 16:01
For 1/10 or 1/12 VTX/VTXR


                               
登錄/註冊後可看大圖
  pretty good looking ga! But the esc doesn't really need fan ..
作者: SWL    時間: 2013-1-22 11:02
Team Powers試過條心移位
想試試MangoRacing,相信不會貴
http://rc-evo.com/xbbs/forum.php ... &extra=page%3D1
作者: carven.chow    時間: 2013-1-22 11:13
Mango Racing 頭段線性 尾段好爆
我4.5用 84\21 *2 齒比8
係Jv好快
溫度都係50度左右
作者: defcone    時間: 2013-1-22 11:31
carven.chow 發表於 2013-1-22 11:13
Mango Racing 頭段線性 尾段好爆
我4.5用 84\21 *2 齒比8
係Jv好快

How much?
作者: carven.chow    時間: 2013-1-22 13:03
defcone 發表於 2013-1-22 11:31
How much?

我買480 4.5 黑色的
作者: seven    時間: 2013-1-22 13:17
本帖最後由 seven 於 2013-1-22 13:21 編輯
carven.chow 發表於 2013-1-22 11:13
Mango Racing 頭段線性 尾段好爆
我4.5用 84\21 *2 齒比8
係Jv好快

黑芒10.5, 都唔錯
齒比6.6, 谷大turbo, 溫度唔算高 65以下
JV夠揪!!

作者: tsfai    時間: 2013-1-22 16:05
carven.chow 發表於 2013-1-22 13:03
我買480 4.5 黑色的

Ching, any shop to buy it? Tks.
作者: SWL    時間: 2013-1-22 16:37
tsfai 發表於 2013-1-22 16:05
Ching, any shop to buy it? Tks.

留意內文
http://rc-evo.com/xbbs/forum.php ... &extra=page%3D1
作者: tsfai    時間: 2013-1-23 16:20
Tks Ching.
Does any shop in HK sell Mango stuff?




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2