RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: T-Shox 油壓... [打印本頁]

作者: rcpop 時間: 2013-1-28 12:47
標題: T-Shox 油壓...
套T-SHOX 油壓..砌時發現O-ring 同 D 膠件夾芯非常唔順...
其他師兄有同樣問題嗎?

作者: pingu0714 時間: 2013-1-28 13:32
油壓底下的O-ring用TRF，上面果隻o-ring用返佢跟果D

作者: rcpop 時間: 2013-1-28 13:46

pingu0714 發表於 2013-1-28 13:32

登錄/註冊後可看大圖

油壓底下的O-ring用TRF，上面果隻o-ring用返佢跟果D

請問油壓頂個O-RING下白色膠件穿不過芯, 要迫入才穿過需且夾芯夾得非常緊...有辦法解決嗎?

作者: manman 時間: 2013-1-28 13:53
QC 做得唔好，攞番去店换過粒新膠件，
個 fd 話等 ver 2 先買

作者: ghost 時間: 2013-1-28 18:25
成抽配件加埋已經等於入左十幾度油，哈哈

作者: carven.chow 時間: 2013-1-28 20:09
長定短

作者: carven.chow 時間: 2013-1-28 20:50
長定短

作者: rcpop 時間: 2013-1-28 20:58
短T4個套

作者: yipd 時間: 2013-1-28 22:21
我也買了品質很差不值這個價

作者: vwsl 時間: 2013-1-28 23:07

pingu0714 發表於 2013-1-28 13:32

登錄/註冊後可看大圖

油壓底下的O-ring用TRF，上面果隻o-ring用返佢跟果D

係唔係 TRF 藍色嗰隻呢？

作者: ghost 時間: 2013-1-29 00:05
支芯 d coating 吾夠滑, 換 o ring都吾順

作者: carven.chow 時間: 2013-1-29 07:50
聽聞短油壓係有問題已回收

如果長油壓都係咁要睇睇

作者: ghost 時間: 2013-1-29 11:24
長..........................

作者: elmo7411 時間: 2013-1-29 15:20
長..........................

:'(

作者: carven.chow 時間: 2013-1-29 15:24
咁睇黎要汁汁啦

作者: bigheman 時間: 2013-1-30 07:58
長，短都有問題，設計好，但造功極有問題！中伏！

作者: rc44bid 時間: 2013-1-30 09:19
t師兄可睇下呢段片
T-Shox Assembly
睇下幫唔幫倒手

作者: rc44bid 時間: 2013-1-30 09:21
Sorry. Not sure how to post the link.
Anyway, pls try
http://www.youtube.com/watch?v=1ITy7W37eEc

作者: bigheman 時間: 2013-1-30 18:47
Thx for the video, now that I have seen it, I am sure they can add a part to it, this part should talk about how to make all those shock shafts guide though those shock guides smoothly.

The problem with this shock is , it is being made badly, if you notice when you are building the bottom part, after those high drag blue oring, you put the guide on, you can see it actually stick out, and when you screw the cap on , it will compress the o ring, and it will just grab on the shock shaft, the shaft cannot move freely. (similar at the top).

BTW, the piston , if you look closely, at where they drill the holes, the material has deformed, so that the piston is not round, and when it move though the shock body, it will also drag as well.

作者: bigheman 時間: 2013-1-30 19:02

rcpop 發表於 2013-1-28 13:46

登錄/註冊後可看大圖

請問油壓頂個O-RING下白色膠件穿不過芯, 要迫入才穿過需且夾芯夾得非常緊...有辦法解決嗎?
...

this may help you!!

http://www.hudy.net/xhudy/produc ... 80&kategoria=57

作者: rcpop 時間: 2013-1-31 09:17

bigheman 發表於 2013-1-30 19:02
this may help you!!

http://www.hudy.net/xhudy/products/proddesc.php?prod_id=280&kategoria=57

thx a lot

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)