RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 請教Ex-1 Precious steering servo setting問題 [打印本頁]

作者: 900turbos 時間: 2013-3-7 11:08
標題: 請教Ex-1 Precious steering servo setting問題
各位師兄，昨晚小弟有幸買到支Ex-1 Precious，操作本是沒有問題。

但當我裝上Mini-Z AM27 Module想控制一般的AM27 receiver(KR-285/KR-288)時，servo只向了左邊，聽到servo是一路出力推住向左邊的，而扭動軚盤就沒有反應。

油門就沒有問題，操作正常。

請問是不是setting出現問題還是Mini-Z AM27 Module不能對應一般的KO AM27 Receiver呢？

謝謝。

作者: salimlun 時間: 2013-3-7 13:39
seem not to be the problem of AM27 Module, i have same config with futaba AM27 receiver work fine. May be reset all setting as central in EX1 and test the receiver & servo with another AM27 transmitter.

作者: 900turbos 時間: 2013-3-7 14:09

salimlun 發表於 2013-3-7 13:39

登錄/註冊後可看大圖

seem not to be the problem of AM27 Module, i have same config with futaba AM27 receiver work fine. M ...

Hello salimlun,

Thanks for your assistance.

I've read over the manual it appear that EX-1 do not have "reset" function?! Am I right?

Many thanks.

作者: 900turbos 時間: 2013-3-8 13:17

salimlun 發表於 2013-3-7 13:39

登錄/註冊後可看大圖

seem not to be the problem of AM27 Module, i have same config with futaba AM27 receiver work fine. M ...

謝謝Ching幫手解答，尋晚搵到問題了，原來係KO 的AM27 Module不對應Sanwa的receiver。

尋晚試左用響KO KR288, KR293, Futaba的舊AM27接收器個servo都冇問題，今晚會再試下用唔用到KO KR285A

麻煩哂啊

作者: salimlun 時間: 2013-3-9 23:20
多謝測試結果，大家多個reference.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)