RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TT-02請教 [打印本頁]

作者: 0433433 時間: 2013-6-10 21:30
標題: TT-02請教
各位師兄
小弟想砌部TT-02平玩
有冇d平靚servo介紹下

作者: TOMY1988 時間: 2013-6-10 21:33
平車貴玩.......淨推桿都要買三對.....諗清楚...

作者: hing830 時間: 2013-6-10 22:02
話明平玩，更係不用換推桿，但師兄說平靚伺服器，咁就有點

，平可用3003，貴就大把選擇。

作者: kkchung 時間: 2013-6-10 22:10
Team Powers Primus Digital 短 Servo 也不錯，再平些 HobbyPRO　的短 Servo 也不錯。

作者: 0433433 時間: 2013-6-11 09:10
Thx師兄：）

作者: jypepe 時間: 2013-6-11 10:42

TOMY1988 發表於 2013-6-10 21:33

登錄/註冊後可看大圖

平車貴玩.......淨推桿都要買三對.....諗清楚...

搞到我對TT02B 退縮

作者: hungbobby 時間: 2013-6-11 18:09
I have bought TT-02. Actually I think it is quite sturdy and more rigid than a TT-01. For turn buckles, I just changed one linking the steering servo and the steering setup for L/R adjustability, which I just need a Tamiya HK$40 turnbuckle set.
On the other hand, I found although the package do offer 2 x long hex for wide wheelbase, it did not come with the long axle cup and without which I don't have enough screw depth to screw on my wheels after the long hex is installed.

作者: jypepe 時間: 2013-6-11 23:23
加闊六角但條軸冇長到？咦～～？

作者: d.s 時間: 2013-6-12 18:17

jypepe 發表於 2013-6-11 23:23
加闊六角但條軸冇長到？咦～～？

隨車附送四粒正常,兩粒加長六角,
但加長軸需另買,而非常過份地,一包$40 parts內只有一條,冇錯係 [一條] ,Paid $80先有一對~

作者: lam_109 時間: 2013-6-13 00:52
01系有一對哦，02咁縮骨啊。

作者: d.s 時間: 2013-6-13 09:44

lam_109 發表於 2013-6-13 00:52
01系有一對哦，02咁縮骨啊。

唔算縮骨,皆因係非必要Parts,
用跟Kit殼係冇需要的,我覺得佢老套係另買Parts都要屈你買兩包 !!

作者: RoyaleM3 時間: 2013-6-13 14:15

hungbobby 發表於 2013-6-11 18:09
I have bought TT-02. Actually I think it is quite sturdy and more rigid than a TT-01. For turn buckl ...

The long wheel base mod is a very good mod.
The car's handling will improve a lot.

作者: 暴風超音 時間: 2013-6-13 15:15

RoyaleM3 發表於 2013-6-13 14:15

登錄/註冊後可看大圖

The long wheel base mod is a very good mod.
The car's handling will improve a lot.

that's track width, not wheel base

作者: RoyaleM3 時間: 2013-6-13 16:10

暴風超音發表於 2013-6-13 15:15

登錄/註冊後可看大圖

that's track width, not wheel base

Thanks !

作者: shinme 時間: 2013-6-13 19:19
唔係好明。即買返黎係無咁對parts,要你另外買？

我岩岩砌左部TT01,佢跟左兩長兩短的軸（唔知點叫），但開頭無提我係一定要砌佢「option」果款，攪到我要折尾擔，換返對短去個頭擔度。但有跟4個短六角，2個長六角，無額外野要買。我唔明佢點解說明書無講名係跟左wide base俾我，淨係用百搭說明書咁懶。

作者: hungbobby 時間: 2013-6-13 21:55
TT01 manual 冇，TT01E manual 有 P6 step 8 'C7 for wide tread'

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)